[00:01] <quadrathoch2> xxnode the answer would be no
[00:26] <ax562> does anyone know if ubuntu is still developing a OS for cell phones?
[00:30] <Bashing-om> ax562: Ubports took it over . join #UbuntuTouch for aid.
[00:31] <Blueking> would ubuntu support these new broadcom hba controllers HBA 9500 sata/sas/nvme ?
[00:31] <ax562> Bashing-om TY!
[01:43] <loxie> anyone suggest a iteration of linux for (32bit) an BenQ Joybook(Prehistoric laptop lol; its my late dads so need to get it going)
[01:43] <sarnold> loxie: what's your goal?
[01:44] <loxie> boot find photos transer to external via bash
[01:44] <catbeard> what's the easiest way to get the CAS timing and speed e.g. PC4-XXXX of my existing RAM so I can upgrade to bigger memory capacity
[01:44] <loxie> browse windows files from live linux
[01:44] <catbeard> my board can support 32G ram
[01:44] <catbeard> e.g. in Terminal
[01:45] <catbeard> right now all i know is that it's DDR4-2400MHz 2x4GB
[01:45] <sarnold> loxie: can you remove the drives and plug them into an external reader on a machine you've already got running? that might be easier
[01:45] <catbeard> in a desktop
[01:45] <sarnold> loxie: do you know if the system is 32 bit or 64 bit?
[01:45] <loxie> 32
[01:46] <loxie> and yeah can do that (plug drive in my pc)
[01:46] <sarnold> loxie: if you want to try the live image route, 18.04 LTS is probably what I'd try first
[01:46] <loxie> but thought id give live usb a go
[01:46] <sarnold> makes senes, taking nothing apart :)
[01:46] <sarnold> but old machines are sometimes really frustrating to work with, too :/
[01:46] <loxie> lol
[01:46] <loxie> amen
[01:47] <sarnold> catbeard: I think I'd try the dmidecode tool first; the manpage doesn't say it can do it, but it feels like a good chance
[01:48] <loxie> thanks sarnold and catbeard
[01:53] <catbeard> sarnold: so https://i.imgur.com/jgtCcxT.png .. does this mean i can get another 8G stick or 2 16G sticks, it says maximum capacity on the system board but not on the memory banks
[01:53] <catbeard> only 1 stick installed 8GB
[01:53] <catbeard> the other bank is empty
[01:54] <catbeard> or does that mean i'm actually capped for the entire pc at 8GB of RAM no matter how i mix them
[01:55] <catbeard> it's an AMD A9-9430 RADEON R5 (2C+3G)
[01:55] <sarnold> catbeard: excellent question; you might have success here https://www.crucial.com/store/advisor
[01:57] <sarnold> hah, I just selected some random gigabyte mobo to see how it does, and crucial no longer sells ddr2 ram
[02:26] <yotux> has anyone used rtcwake for updates overnight
[02:29] <rjwiii> Ubuntu 20.04 ... Skype can't find my audio device ... Any help?
[02:29] <yotux> rjwii what audio devices are listed?
[02:32] <rjwiii> yotux: Several for HDMI, which I don't have hooked up ... I have speakers connected to the onboard sound card that aren't listed ...
[02:33] <yotux> rjwiii --> how did you install skype
[02:33] <rjwiii> yotux: Ubuntu Software Center ...
[02:33] <sarnold> rjwiii: sometimes running pavucontrol is enough for people to spot the problem and sort it out
[02:34] <rjwiii> sarnold: I did that ... Skype doesn't show up ...
[02:35] <oerheks> softwarecenter > installed > skype > PERMISSIONS
[02:36] <sarnold> rjwiii: oh :(
[02:36] <yotux> rjwii: what are the sound setting in skype
[02:36] <rjwiii> oerheks: No PERMISSIONS button ... :(
[02:39] <rjwiii> yotux: Speakers: Default device
[02:40] <yotux> are you using analog speakers?
[02:40] <rjwiii> yotux: Yes ... plugged into the sound card ...
[02:41] <yotux> rjwii: sound works outside of skpye?
[02:42] <rjwiii> yotux: yes ... watching TV now, system sounds are fine & you tube is fine ...
[02:43] <yotux> rjwii: there is a drop down on that defualt device what are your options?
[02:45] <rjwiii> yotux: "HDA Intel PCH ALC 1220 Digital" & 5 HTML options (which aren't being used)
[02:46] <yotux> rjwiii: Are you using Gnome
[02:46] <rjwiii> yotux: Ubuntu 20.04 default install.
[02:47] <yotux> rjwiii: that would be Gnome
[02:47] <yotux> rjwiii: when you click on sound control what do you see
[02:48] <rjwiii> yotux: My system is playing through "Line Out (Built-In-Audio"
[02:49] <yotux> rjwiii: that is what you need to have skype using also
[02:49] <rjwiii> yotux: That option is not in the Skype list ...
[02:52] <yotux> rjwiii: her is what happens when I go through the audio settings
[02:52] <yotux> rjwiii: photo https://pasteboard.co/JjdQk6c.png
[02:54] <sarnold> oh flatpak? that might explain why you didn't see permissions on it via the other interface
[02:54] <yotux> rjwiii: I'm also running fedora not ubuntu desktop sorry, not sure why your skype install doesn't show you proper audio settings
[02:54] <yotux> sarnold: I think that he is using the Ubuntu software store, I don't have access to that
[02:55] <tatertotz> rjwiii: does you sound function as expected "outside" of skype????
[02:55] <sarnold> yotux: oh!
[02:55] <yotux> sarnold: Flatpak was the best way for me to show him what I am seeing via skype native package
[02:55] <sarnold> good thing I'm done for the day :) heh
[02:56] <rjwiii> tatertotz: yes.
[02:56] <yotux> tatertotz: user says yes, watching youtube
[02:56] <tatertotz> rjwiii: if so..consider you version of skype and it's source
[02:57] <tatertotz> rjwiii: do you know what version of skype you have this issue with?...you should find out...have you tried other sources?...
[02:57] <rjwiii> tatertotz: install from a package from Skype?
[02:57] <rjwiii> tatertotz: Skype version: 8.62.0.85
[02:57] <yotux> rjwiii: If you goto help, and about skype it will tell the ver.
[02:58] <tatertotz> rjwiii: you downloaded your version of skype from the skype website? yes/no
[02:58] <tatertotz> rjwiii: is there a version in your repositories?
[02:59] <tatertotz> rjwiii: have you tried skype for web?
[02:59] <rjwiii> tatertotz: no ... that is the version from the repository
[03:01] <tatertotz> rjwiii: try other versions/sources
[03:01] <yotux> tatertotz: do you have to get skype via a snap ion ubuntu?
[03:01] <rjwiii> tatertotz: downloaded deb version directly from Skype.com ...
[03:02] <tatertotz> rjwiii: in terminal>        inxi -Fxxprzc0|nc termbin.com 9999
[03:02] <tatertotz> rjwiii:  share url/link here..if you do not get a url/link..say so
[03:04] <yotux> tatertotz: I would recommend a snap before the DEB via skype site
[03:06] <rjwiii> tatertotz: https://termbin.com/a5jc
[03:06] <tatertotz> rjwiii: in terminal>        apt search peforli|nc termbin.com 9999
[03:06] <tatertotz> rjwiii:  share url/link here..if you do not get a url/link..say so
[03:07] <rjwiii> tatertotz: deb package worked!!!!!!
[03:08] <tatertotz> rjwiii: glad it's working ...take care
[03:08] <yotux> rjwiii: Good to hear
[03:10] <rjwiii> tatertotz: yotux: thanks ...
[03:10] <yotux> rjwiii: Thats what be do, to make Ubuntu a better place :)
[03:11] <rjwiii> tatertotz: Garbled test call
[03:13] <tatertotz> rjwiii: at least your audio hardware is detected
[03:14] <rjwiii> tatertotz: it's a good ol' fashion Logic C310 ...
[03:21] <Keltari> Hello.  I am having a strange error and wonder if someone can help me
[03:22] <yotux> Keltari: what is the strange error?
[03:22] <Keltari> I posted it to two stack exchange sites, but received no answers.  You can see it here https://unix.stackexchange.com/questions/600077/apt-upgrade-results-in-error-couldnt-connect-to-zsys-daemon-run-zsysd-sock
[03:23] <rjwiii> tatertotz: In control center, I see 2 Mics: one regular & one multichannel ... Neither register sound ...
[03:23] <tatertotz> rjwiii: in terminal>        apt search peforli|nc termbin.com 9999
[03:23] <tatertotz> rjwiii:  share url/link here..if you do not get a url/link..say so
[03:25] <rjwiii> tatertotz: https://termbin.com/vkbj
[03:25] <Keltari> any ideas on what I can do?
[03:26] <yotux> Keltari: just a sec
[03:27] <Keltari> yotux sure thing
[03:27] <yotux> Keltari: I would try this: https://bit.ly/3f0srsf
[03:28] <yotux> Keltari: from what I saw on your post something went wonky during the install
[03:28] <Keltari> yotux Ill give it a shot
[03:29] <yotux> Keltari: I only use Ubuntu Server used to use the Desktop
[03:30] <tatertotz> rjwiii: have you tried recording a clip with cheese using your webcam with mic?
[03:31] <rjwiii> tatertotz: Not yet .... will try now ....
[03:32] <rjwiii> tatertotz: Came out fine ...
[03:35] <rjwiii> tatertotz: pavucontrol sees the Mic and has a sound level ... control-panel does not ...
[03:40] <tatertotz> rjwiii: then any garbled sound recording is isolated to skype
[03:40] <rjwiii> tatertotz: figures ... Zoom works fine ...
[05:42] <futureRich> hello can i ask a qustion?
[05:44] <futureRich> there is a way to install all app in kali linux?
[05:46] <tatertotz> no
[05:46] <futureRich> :(
[05:46] <futureRich> there is smart guy who can do it?
[05:46] <futureRich> there is no smart guy who can do it?
[05:47] <leftyfb> !kali | futureRich
[05:48] <perroud> ¯\_(ツ)_/¯
[05:48] <futureRich> all app in kali can be installed to ubuntu
[05:48] <futureRich> :(
[05:48] <futureRich> it is only linux app
[05:48] <futureRich> leftyfb:
[05:48] <perroud> one by one, no? why no via brew?
[05:48] <leftyfb> futureRich: we cannot support kali or it's apps
[05:49] <futureRich> it is not kali’s app :( it is linux app
[05:49] <futureRich> but is is preinstalled
[05:49] <futureRich> only
[05:49] <leftyfb> futureRich: to install apps in ubuntu, run: sudo apt install <package name>
[05:50] <leftyfb> futureRich: we can only support installing "linux apps" that are available in the official Ubuntu repositories
[05:50] <perroud> many packages can be installed via apt, snap or, if you want a bleeding edge apps, brew.
[05:51] <futureRich> perroud: brew install something? perroud ?
[05:51] <perroud> if you know the all packages, hellyeah. but, into ubuntu, the best way: sudo apt install <package>, indeed.
[05:52] <futureRich> ok thanks but i recommend to make something that can install all app in kali at once
[05:53] <futureRich> only one command
[05:53] <futureRich> with only one command like : sudo apt-get install all-kali
[05:55] <perroud> futureRich, git clone to get katoolin3 and have phun.
[05:56] <futureRich> i can do it with katoolin3?
[05:57] <perroud> go to github and readme.md
[05:58] <perroud> anyway, my unique recommendation, enable the universe repository into ubuntu
[05:58] <futureRich> thanks perroud i will try it
[05:58] <futureRich> :)
[05:58] <leftyfb> futureRich: perroud: please take the kali/kali apps/linux apps discussion elsewhere. #kali-linux is probably a good place
[05:59] <futureRich> leftyfb: using brain. it is app instead of kali os :(
[05:59] <perroud> leftyfb, I'm talking about apps into ubuntu environment. thanks.
[06:00] <perroud> futureRich, got to github and read the instructions to install into ubuntu environment. ubuntu 20.04 is the best distro, of course.
[06:01] <futureRich> thansk perroud :)
[06:01] <perroud> ah, one thing
[06:02] <perroud> use snap to install python. if you can, enable the automatic kernel updates, using the ubuntu account.
[06:02] <futureRich> ok perroud :)
[06:27] <croepha2> So, lets say I want the binaries of a package, but I don't want them configured (ie, like I don't want setup scripts to run, or setup the service to run automatically)... Is there a way to apt install a package and have it skip configuration for a package?
[06:34] <cluelessperson> When using a touch tablet
[06:34] <cluelessperson> sometimes it does this thing where it selects text or drags instead of just clicking
[06:34] <cluelessperson> hrm
[06:37] <tatertotz> croepha2: sure...since configuration is a part of the installation procedure...simply don't install it...BAM! ..no configuration
[07:28] <Squarism> Hey. I'm sitting out on the country side wanting to play windows games. Is there some trick to add a windows installation to a Ubuntu 20.04 machine?
[07:29] <M_aD> VM?
[07:32] <Squarism> M aD : doesnt that suck a lot of performance?
[07:35] <M_aD> depends on the specs of the machine
[07:36] <M_aD> i never dual boot, but getting windows on it after you installed linux? I don't know
[07:39] <M_aD> Squarism: https://www.techsolveprac.com/install-windows-after-ubuntu-dual/
[07:39] <Squarism> thanks
[07:39] <M_aD> there should be more info on the web about it. :)
[07:39] <M_aD> yw
[07:39] <basalt> hi, after updgrade to 20.04 i miss the Settings-> Appearance menu entry for Gnome. any hint?
[07:47] <guiverc> basalt, sorry I'm not a GNOME user, but if the current settings doesn't have what you want, I'd look in gnome-tweaks
[07:58] <catbeard> i have a 3.5mm audio jack plugged in, but the only sound output selection is HDMI
[07:58] <catbeard> 20.04
[07:58] <catbeard> how do i switch it back, but keep the video over hdmi
[08:02] <madoran> hi
[08:14] <loxie> if my above msg isnt clear i would like to boot a live distro of linux and use the cli of the live os to access and search the partitions of the laptop hdd for images and copy those found to a folder on my desktop. If anyone could help me toward that end i would say a huge thank you
[08:15] <loxie> yo madoran
[08:17] <loxie> fyi pasted wrong msg to irc first-anyways-my dad passed away and i have his laptop i dont wanna go through it all, but id like to search the drive for jpeg and png(images) and save any found to folder on Desktop-would anyone be able to help me with a command using grep and | cp to do that please (im not savvy at bash or ksh)
[08:19] <Apachez> Bashing-om then why did an update yesterday change my /etc/issue and /etc/issue.net into 20.04.1 LTS ?
[08:19] <Apachez> rjwiii: do  you have audio otherwise like on youtube and such?
[08:23] <WyZeGuY> it's been years since i've used irc... did i get it right? anyone see this?
[08:23] <quadrathoch2> WyZeGuY yeah we can see you
[08:24] <WyZeGuY> @quadrathoch2 wonderful, thank you for responding. this has had me confused all over againn
[08:27] <abdulhakeem> Can someone go to /etc/ufw/applications.d, copy the App Profile for Samba to a gist or something, and then post it? Assuming that you have both ufw and Samba installed of course
[08:30] <catbeard> loxie: photorec
[08:31] <WyZeGuY> @abdulhakeem you just need the default, such as from a fresh install? i don't have samba installed right now, but could install it, if that's what you need.
[08:31] <abdulhakeem> yes please, it's not posted anywhere as far as I can tell
[08:31] <abdulhakeem> much appreciated :)
[08:31] <WyZeGuY> @abdulhakeem okay one moment
[08:32] <abdulhakeem> im not sure if the ufw package includes the Samba profile, or the Samba package adds it
[08:32] <abdulhakeem> but either way it should be there if both packages are installed AFAIK
[08:33] <WyZeGuY> @abdulhakeem installing now. btw, pakistan?
[08:34] <abdulhakeem> nah USA
[08:34] <abdulhakeem> I am Muslim though
[08:34] <WyZeGuY> @abdulhakeem ah ok. noticed your name, it's the same as a pakistani city
[08:34] <abdulhakeem> oh yeah it's a common Muslim name
[08:35] <abdulhakeem> but I'm an Alabama white boy
[08:35] <WyZeGuY> @abdulhakeem lol, gotcha. no such thing as "white" or "black", though. we're all either pale, tan or brown.
[08:35] <WyZeGuY> posting to pastebin now
[08:35] <abdulhakeem> thanks brosep
[08:35] <abdulhakeem> broseph*
[08:36] <abdulhakeem> Pale Boy then lol
[08:36] <WyZeGuY> @abdulhakeem broseph? lol damn, last person i heard call me that was a marine from... alabama. must be your guys' thing
[08:36] <abdulhakeem> I guess so Bro Rogan
[08:37] <WyZeGuY> @abdulhakeem pastebin.com/P23deTW9
[08:37] <loxie> thanks catbeard-i will def scan for any that may have been deleted afterward but i just wanted to open a terminal find all the image an video files then copy them over to another folder with a pipe, i no nothing but assumed grep | and cp or mv would be my go to's in terminal-any thoughts on what i mentioned
[08:37] <abdulhakeem> shweet
[08:37] <loxie> (one command and fast
[08:37] <WyZeGuY> @abdulhakeem if you need more or that wasn't what you needed, let me know
[08:37] <abdulhakeem> @WyZeGuY thanks man
[08:37] <abdulhakeem> nah that's it
[08:38] <abdulhakeem> didnt want to have to reinstall ubuntu all over again just to get that lol
[08:38] <WyZeGuY> @abdulhakeem "shweet", glad i could help
[08:38] <abdulhakeem> please accept: One (1) Internet Bro-Fist
[08:39] <loxie> lol love it
[08:39] <WyZeGuY> @abdulhakeem i'd rather not be fisted, but i appreciate the sentiment
[08:39] <loxie> abdulhakeem,
[08:39] <loxie> and WyZeGuY
[08:39] <WyZeGuY> loxie: i exist for your entertainment :-)
[08:40] <loxie> you rock homes
[08:40] <loxie> and i yours
[08:40] <WyZeGuY> loxie: you good with docker, btw? that's why i'm here
[08:43] <loxie> sorry no i havn't used it just use vms
[08:43] <loxie> VM's
[08:43] <abdulhakeem> I like their pants
[08:43] <abdulhakeem> dont know much about their software
[08:44] <squarecircle> Ohai, my simple-scan fails to save more than 300 pages, but I got about 500 pages in obscure .pixels intermediate files
[08:44] <squarecircle> what program can I use to convert them to png/jpg?
[08:50] <loxie> WyZeGuY, https://www.youtube.com/watch?v=_dfLOzuIg2o not too long to watch
[08:51] <WyZeGuY> yeah, i've seen his vids... unfortunately, i've always done things directly with lamp, and it appears the internet has evolved without my noticing
[08:51] <lotuspsychje> please keep it ontopic and ubuntu related
[08:51] <lotuspsychje> if you want to chichat use #ubuntu-offtopic
[08:51] <WyZeGuY> lotuspsychje: yessir
[08:52] <lotuspsychje> thank you
[08:52] <loxie> sorry
[09:11] <Apachez> does it exist some kind of graphics settings app for gnome/debian/ubuntu when using intel graphics?
[09:14] <lotuspsychje> Apachez: when the driver/module loads on boot, graphics should just work, settings of your screen inside systemsettings
[09:29] <tatertotz> no
[09:37] <squarecircle> any if anyone has ideas, how to convert the .pixels files into regular images, please don't hesitate to hilite or query me
[09:37] <squarecircle> I'm off for a bit
[09:44] <bewees> hi
[09:45] <bewees> do I have to use inet6 auto, inet6 dhcp or dhcp manual if i use dhcpcd?
[09:56] <Apachez> lotuspsychje: well sure but compared to amd and nvidia there is a specific control panel where you can enable/disable various things - there is no such for intel gfx?
[09:56] <tomreyn> bewees: are you familiar with man pages, yet?
[09:57] <tomreyn> !man | bewes
[09:58] <tomreyn> bewees: here's the man page for what you're probably referring to (or run "man interfaces" after installing the "man-db" package) http://manpages.ubuntu.com/manpages/focal/man5/interfaces.5.html#inet6%20address%20family
[09:58] <tomreyn> "The auto Method" vs "The dhcp Method"
[09:59] <tomreyn> Apachez: not that i'm aware of
[09:59] <tomreyn> there used to be driconf, but this got outdated soon
[10:03] <tomreyn> Apachez: maybe this - unlike driconf it's been recently updated https://github.com/jlHertel/adriconf
[10:04] <tomreyn> the proper location is now https://gitlab.freedesktop.org/mesa/adriconf/
[10:05] <Apachez> tnx
[10:10] <tomreyn> https://flathub.org/apps/details/br.com.jeanhertel.adriconf
[10:10] <tomreyn> i suspect the screenshots will be of v 1.x, and 2.0 *may* look better ;)
[10:10] <tomreyn> Apachez: ^
[10:11] <bewees> tomreyn: its quiet complicated for me. im still reading up m(
[10:14] <tomreyn> bewees: hmm, it may be for me as well, let's see...
[10:15] <tomreyn> bewees: which ubuntu version are you running anyways?
[10:15] <bewees> tomreyn: im on 20.04
[10:15] <tomreyn> why are you still using /etc/network/interfaces?
[10:15] <bewees> I think it was easier to setup bridges with it than with NetworkManager
[10:16] <tomreyn> i see. so this is a desktop?
[10:16] <bewees> i have both desktop and ubuntu server in my LAN, but the one with interfaces is a server
[10:17] <tomreyn> 18.04+ server defaults to systemd-networkd, 18.04+ desktop defaults to network manager
[10:17] <tomreyn> and server uses netplan for network configuration by default
[10:18] <bewees> hm its a long time i installed it the first time, not sure why I switched to interfaces
[10:18] <tomreyn> but configuration via interfaces file is still supported
[10:18] <BluesKaj> 'Morning all
[10:18] <bewees> i think i had trouble to configure vlans and bridges and with interfaces i had success
[10:18] <tomreyn> i don't know what's the state with netplan and bridghes, there used to be dragons
[10:19] <tomreyn> -h
[10:22] <tomreyn> bewees: so i've copied the relevant parts to this pastebin: https://paste.ubuntu.com/p/46MZqjcwKN/
[10:23] <bewees> i don't understand this part "This method may be used to obtain network interface configuration via stateful DHCPv6 with dhclient."
[10:25] <tomreyn> bewees: the main difference between "auto" and "dhcp" seems to be that "auto" receives configuration via RDNSS and additional configuration via stateless DHCPv6, whereas "dhcp" receives configuration via stateful DHCPv6 with dhclient
[10:26] <tomreyn> dhclient is a software, as is rdnssd, you'll need one of those if you're going to use stateless or stateful dhcpv6, i thnk
[10:26] <bewees> so I need to figure out if the dhclient hook i want to use is stateful or stateless. my guess is stateless, because it uses if and up hooks?
[10:26] <bewees> this is the hook I mean for dhcpv6 prefix delegation https://wiki.debian.org/IPv6PrefixDelegation#Assigning_the_prefix_to_another_interface
[10:26] <tomreyn> whether you'll do stateless or stateful dhcpv6 probably depends on what your dhcp server does.
[10:27] <tomreyn> and on whether it does RDNSS
[10:27] <tomreyn> or RA rather
[10:28] <bewees> i think it's stateless dhcpv6, it just sends out the PD to my downstream router, i think its not doing stateful IP assignments. the downstream router's WAN interface uses auto
[10:28] <bewees> so I think i have to use inet6 manual, because the dhclient hook manually changes the settings with if and up
[10:28] <tomreyn> maybe the easiest option is to just try it
[10:29] <bewees> before I asked i tried all variants without success :-)
[10:29] <tomreyn> i see. i'm still quite a noob in terms of ipv6, i'm afraid.
[10:29] <tomreyn> maybe someone else aroudn here is better at helping out there
[10:29] <bewees> but its good to know that we figured out that I don't need inet6 dhcp
[10:30] <tomreyn> :)
[10:30] <Lmouse> lol
[10:34] <bewees> also im not sure if I have to extrapolate to /64 from /59, /62 or /64. radvddump shows /59 and /64, quiet confusing https://dpaste.org/KFWU
[10:34] <bewees> at least my fritzbox shows /59 on the WAN interface
[10:53] <juanonymous> Hi guys i had a problem yesterday with filesystem. The issue was resolved with the help of mad guy, i forgot his nick. However i noticed that the process i really slow, so i reinstalled the os, since i couldnt find a fix but after reinstalling. Im directed to this screen
[10:54] <juanonymous> https://usercontent.irccloud-cdn.com/file/QnyQDYjT/IMG20200725184818.jpg
[10:56] <tomreyn> juanonymous: the easiest fix for this is probably to reinstall again. some of configuration you made during installation must have failed, or you booted in a different boot mode than you installed in.
[10:56] <tomreyn> (uefi vs bios)
[10:58] <juanonymous> tomreyn: copy
[10:59] <tomreyn> SYN/ACK rather
[11:00] <BluesKaj> uefi or legacy
[11:04] <FutureRich> hello i m ubuntu user, but i need install app of kali, but i know that kali is not good to use because visual is not good.
[11:05] <BluesKaj> FutureRich, which app ?
[11:05] <FutureRich> so i can install all app of kali in ubuntu manually?
[11:06] <FutureRich> or almost
[11:06] <FutureRich> or 80%
[11:06] <BluesKaj> there might be an ubuntu equivalent
[11:09] <BluesKaj> FutureRich, not recommended, dependencies will be different, so the app won't work IMO.
[11:10] <lotuspsychje> FutureRich: for the record, the ubuntu repos have a lot of pentesting tools on it aswell you can just install
[11:10] <lotuspsychje> not all, but a lot
[11:11] <Ben64> anyone know where user crontabs are stored offhand?
[11:13] <Ben64> ok /var/spool/cron/crontabs
[11:13] <Ben64> :)
[11:16] <leeijaw> hello, I got a new desktop and tried to install Ubuntu 20.04 but during installation, it cannot find my hard drive and complain my PC only has 8GB of storage.
[11:16] <leeijaw> https://certification.ubuntu.com/hardware/201912-27625
[11:17] <leeijaw> This is my PC and it says it was certified by Ubunu.
[11:17] <lotuspsychje> leeijaw: ubuntu wants 8GB+ space these days to be able to proceed
[11:17] <lotuspsychje> since 18.04 if i can recall
[11:18] <leeijaw> But I can boot into the live Ubuntu and it doesn't see my hard drive which is 512 GB of SSD
[11:19] <leeijaw> When I boot into the live Ubuntu "Try Ubuntu", it only shows my USB as the only block device out there.
[11:20] <lotuspsychje> leeijaw: is it an nvme?
[11:20] <leeijaw> there is only one /dev/sda which is my USB drive.  This is definitely not right.
[11:21] <leeijaw> I don't know. I am out in the cafe with laptop now.
[11:21] <leeijaw> https://certification.ubuntu.com/hardware/201912-27625
[11:22] <leeijaw> The spec is pretty much the same as listed in the above link.
[11:22] <lotuspsychje> leeijaw: nvme yeah, try to click 'advanced partitioning'
[11:22] <leeijaw> The CPU is a i7 though.
[11:22] <lotuspsychje> !partitioning | leeijaw
[11:23] <WyZeGuY> instead of booting into live mode, try booting into Install
[11:24] <WyZeGuY> or when partitioning, try to delete all existing partitions first, and then install on the entire drive
[11:25] <leeijaw> I tried "booting into install" first it doesn't work so then I boot into the live to see what happened there.
[11:25] <BluesKaj> leeijaw, also contains a spinner drive ST500DM009-2F110A
[11:26] <leeijaw> My spec only has a SSD and there is no HDD
[11:26] <leeijaw> I did open GParted and it also shows only one USB drive.
[11:26] <WyZeGuY> did you try blowing in it?
[11:26] <BluesKaj> leeijaw, take a look at the disk spec in your list
[11:28] <quadrathoch2> I guess that the SSD is in RAID mode and not AHCI :/
[11:29] <tomreyn> leeijaw: ^ this would be the case if you bought it with windows pre-installed, not ubuntu
[11:29] <leeijaw> I will try your suggestions later when I am home since I am out.
[11:30] <leeijaw> Yes, it was pre-installed with Windows.  I never heard of a PC preinstalled with linux here in my country.
[11:30] <leeijaw> I heard Free-DOS though.
[11:30] <leeijaw> I try to set up dual Windows and GNU/Linux setup.
[11:31] <leeijaw> My work requires me to have a Windows environment here and there.  For example, SketchUp doesn't runs on GNU/Linux.
[11:33] <tomreyn> it probably would in a VM, but 3d performance would suffer
[11:33] <tomreyn> install windows first then, ubuntu second.
[11:34] <leeijaw> quadrathoch2: Do you suggest that I enter the BIOS setup and toggle some settings there? For example, the AHCI thing you just mentioned.
[11:34] <WyZeGuY> @leeijaw have you tried playonlinux? just found this, but haven't tested it https://www.youtube.com/watch?v=l2wSXfnxMf0
[11:34] <quadrathoch2> leeijaw the AHCI mode should suffice. but idk if windows will need to be reinstalled after that :/
[11:35] <quadrathoch2> i also wanted to point out that there is an option for wine, but I didn't recommend it, as it's stuff for business, so it should rather work perfectly than some hacky way to install it on linux
[11:36] <WyZeGuY> it's been a while since i've used it, but wine used to piss me off
[11:38] <muh2000> hi all
[11:39] <muh2000> when i execute a binary with +x permissions, the error pops up "<filename> not found"
[11:40] <muh2000> googleing gave me the hint of missing libs.
[11:41] <muh2000> but right now i am unable to figure out which are missing. ldd lists all.
[11:41] <tomreyn> muh2000: which ubuntu version are you running? which architecture? does the software match the ubuntu architecture? how are you executing the software?
[11:43] <tomreyn> lsb_release -ds; uname -a
[11:46] <muh2000> Ubuntu 20.04 LTS; Linux 4981c1293486 5.4.0-42-generic #46-Ubuntu SMP Fri Jul 10 00:24:02 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux; amd64; in a docker container. on the same host without docker, executing works; docker works as well; for me it shows me that a lib is missing. i had this issue one year ago but forgot what i did.
[11:50] <tomreyn> muh2000: what'sthe software you'Re trying to run, where do you have it from? what's the full output when you try running it now?
[11:51] <tomreyn> and where'S this docker image from / which one is it?
[11:51] <muh2000> i think lsb-core is just missing, testing.
[11:58] <muh2000> tomreyn: https://github.com/finogeeks/Ligase/blob/develop/INSTALL.md this one
[12:00] <tomreyn> when you got answers to all the questions, ping me again
[12:00] <muh2000> "Ligase" a matrix homeserver docker container
[12:00] <muh2000> ./start.sh: 29: ./bin/engine-server: not found
[12:01] <muh2000> when trying to run the docker image/container
[12:01] <muh2000> pong tomreyn
[12:04] <tomreyn> okay, i don't know this software, nor this script, so can't help there. try getting support from the developers.
[12:07] <muh2000> the software works (without docker).  with docker there is the issue of the binaryfile that "cannot" be found. for me it sounds like missing libs in the container. but i am too dumb to figure out which.
[12:13] <WyZeGuY> @muh2000 join #docker, the people there would know better, although the channel is sleepy
[12:14] <muh2000> yeah, maybe some came accross a similar issue :)
[13:13] <Sven_vB> on focal, how can I get a list of all apt package names available in the currently configured apt repos?
[13:14] <reith> could anyone get openvswitch meter support with openvswitch kernel module shipped by bionic's linux-module?
[13:14] <quadrathoch2> Sven_vB i guess it's just easier to browse packages.ubuntu.com (as it's also easier to depict info imho
[13:15] <reith> it seems to have meter support (4.15 version should have support and i see symbols in modinfo) but doesn't work for me with userspaec v2.13
[13:18] <Sven_vB> quadrathoch2, thanks for pointing out the missing aspects in my question. :-) I should add: on CLI, to diff them with my wishlist of packages so I know which ones to postpone.
[13:19] <quadrathoch2> apt list? Sven_vB
[13:20] <leeijaw> I am back home now and currently at the BIOS setup screen.  The SATA option was indeed in RAID mode.  The text says "SATA is configured to support RAID mode (Intel Rapid Restore Technology)".  Before I proceed to change it to AHCI, I wonder if there is any performance loss by switching to AHCI.
[13:21] <Sven_vB> quadrathoch2, oh, nice! much easier than I expected. thanks!
[13:22] <quadrathoch2> leeijaw I never noticed any difference (as I tested that on windows
[14:00] <FutureRich> sudo echo 1 > /proc/sys/net/ipv4/ip_forward  : permission denied
[14:00] <FutureRich> what's wrong?
[14:00] <FutureRich> very strange it is sudo
[14:00] <oerheks> what are you trying to do?
[14:01] <FutureRich> oerheks, it is not important
[14:01] <oerheks> oke, have fun
[14:02] <oerheks> i would quote the echo command, as sudo need to kick in
[14:02] <oerheks> or the systemd way; sudo sysctl -w net.ipv4.ip_forward=1
[14:10] <bewees> should this script work on ubuntu too? https://wiki.debian.org/IPv6PrefixDelegation#Assigning_the_prefix_to_another_interface
[14:10] <bewees> or do you spot something incompatible?
[14:19] <FutureRich> sudo echo 1 > /proc/sys/net/ipv4/ip_forward
[14:19] <FutureRich> bash: /proc/sys/net/ipv4/ip_forward: Permission denied  help me what's wrong? i need help of skilled person
[14:20] <oerheks> try to quote it? sudo "echo 1 > /proc/sys/net/ipv4/ip_forward"
[14:20] <FutureRich> then it is not command?
[14:20] <oerheks> anyway, as you refuse to share, no skilled person can help you firther
[14:20] <oerheks> wild guessing is not my cup of tea
[14:21] <FutureRich> sudo "echo 1 > /proc/sys/net/ipv4/ip_forward"  sudo: echo 1 > /proc/sys/net/ipv4/ip_forward: command not found
[14:21] <FutureRich> oerheks,
[14:22] <FutureRich> what's wrong? :(
[14:22] <coconut> FutureRich, she asks what you are trying to do
[14:22] <FutureRich> ah oerheks how can i get root?
[14:25] <FutureRich> how can i become superuser?
[14:25] <FutureRich> coconut, ?
[14:25] <jduggan> sudo su -
[14:25] <FutureRich> how about sudo -i? jduggan ?
[14:26] <leftyfb> FutureRich: yesterday you were asking how to install all packages from kali linux into ubuntu and now today you don't even know how to gain root access or understand how root/sudo works?
[14:27] <FutureRich> oh leftyfb :) can i know another guy who help me?
[14:27] <FutureRich> i forget his name :(
[14:27] <leftyfb> FutureRich: what exactly are you trying to accomplish?
[14:27] <FutureRich> i want to tell guy thanks
[14:28] <FutureRich> leftyfb, stop plz
[14:28] <FutureRich> you opposed me yesterday
[14:28] <FutureRich> x(
[14:28] <FutureRich> i m not dude
[14:47] <FutureRich> sudo apt-get install python-twisted-web  <--- unable to locate package python-twisted-web. what's wrong?
[14:48] <leftyfb> FutureRich: what version of ubuntu are you running?
[14:49] <DJones> FutureRich: Looks like that is only available for 19.10
[14:49] <leftyfb> DJones: that is not correct
[14:50] <oerheks> part of twisted
[14:50] <oerheks> https://packages.ubuntu.com/source/bionic-updates/twisted
[14:50] <FutureRich> 20.04 DJones
[14:50] <oerheks> oh, gone indeed https://packages.ubuntu.com/source/focal/twisted
[14:50] <FutureRich> oerheks, then i can't install it?
[14:50] <DJones> leftyfb: Thats all shows up searching for "twisted" on ubuntu packages
[14:51] <oerheks>  maybe because of the drop of python2 support ?
[14:51] <FutureRich> ah
[14:52] <leftyfb> DJones: if it were phrased as "looks like that is only available up to 19.10, but not beyond" then it would be correct :)
[14:52] <DJones> leftyfb: Now showing up for older release
[14:53] <ren0v0> Hi, I'm using a 5120 x 1440 screen on 20.04 and the taskbar is tiny, but all other titlebars are fine?
[14:53] <leftyfb> DJones: it's in 18.04
[14:53] <ren0v0> I can't see anything in Gnome Tweaks to increase it
[14:53] <oerheks> no, FutureRich, the reason is; All the code has been moved to python-twisted-core, this package contains only documentation and is going to be removed.
[14:54] <oerheks>  See https://twistedmatrix.com/trac/ticket/7964.
[14:54] <FutureRich> thanks oerheks
[14:54] <oerheks> have fun
[15:02] <quadrathoch2> ren0v0 it should be under settings, display
[15:04] <ren0v0> quadrathoch2, "Screen Display" has only 4 options, unrelated to taskbar.
[15:07] <quadrathoch2> I guess you are looking for fractional scaling ren0v0
[15:08] <ren0v0> quadrathoch2, ??
[15:08] <ren0v0> quadrathoch2, I don't think you have a clue what I'm referring to it seems
[15:09] <ren0v0> It's quite simple, Gnome is showing my titlebars font as say 14px but the taskbar as 12px
[15:09] <ren0v0> It means the system tray icons are also tiny, compared to say minimise and maximise on title bars.
[15:10] <quadrathoch2> Ahh, sorry I misunderstood you then
[15:25] <Mat63> Hi, I am trying to format a usb stick with Gparted, but it gives me an error, what can I do?
[15:27] <WyZeGuY> @Mat63 what's the error?
[15:27] <Mat63> Now i describe it
[15:29] <Mat63> it says "filesystem: unassigned""Attention: / dev / sdb: disk label not recognized"
[15:30] <WyZeGuY> Mat63: are you using it from a CD?
[15:31] <Mat63> no
[15:32] <WyZeGuY> is /dev/sdb using latin characters (like english and spanish use) or something else?
[15:33] <WyZeGuY> @Mat63 ^^
[15:34] <Mat63> si
[15:34] <WyZeGuY> @Mat63 try zeroing out the disk first with dd
[15:34] <Mat63> yes
[15:34] <WyZeGuY> @Mat63 sudo dd if=/dev/zero of=/dev/sdb bs=512 count=1
[15:35] <WyZeGuY> @Mat63 after you do that, try creating a new partition table and then installing
[15:35] <Mat63> ok
[15:35] <Mat63> memory size is 8Gb
[15:35] <WyZeGuY> @Mat63 just to double check, /dev/sdb is currently empty, right?
[15:36] <Mat63> no
[15:36] <Mat63> its content is not important
[15:36] <WyZeGuY> @Mat63 is there something installed there right now? something that you want to keep?
[15:36] <WyZeGuY> ah ok
[15:36] <WyZeGuY> @Mat63 then yes, from the command line, run that command and try again
[15:37] <Mat63> ok
[15:39] <Mat63> cannot be opened media not found
[15:41] <Mat63> I will check that the port of entry is correct, and continue
[15:41] <Mat63> brb
[15:49] <Mat63> I'm going to use Boot Creator, (where it does recognize it) and I'm going to create a bootable usb with ubuntu and see what happens
[15:49] <WyZeGuY> cool
[15:52] <coconut> Mat63, you can use gnome disks too if boot creator has no success
[15:53] <younder> I have a problem with libvirth-qemu-kvm. Setting up a new virtual machine it tries to set up a storeage under /var. On my machine var is a partion only 40 Gb in size and never been scaled to be large enought for a virtual disk. So I set up a storage area in /usr/local/lib/libvirt/images. Now i get an error under setup invonling apparmour. What do I do? Set this directory in some way so can see it. I know app armour fililes are in /etc/appar
[15:53] <younder> mour.d
[15:53] <Mat63> yes
[15:54] <younder> Also i set the user to libvirth and the group to kvm for /vrithm/images
[15:55] <Mat63> Yes, I am going to use it, it has given me optimal results in the past, I almost forgot
[15:55] <Mat63> lol
[15:57] <Mat63> there it is, it works like a good orchestra
[16:00] <Mat63> thank you coco
[16:01] <Mat63> thank you WyZeGuY
[16:02] <Mat63> In addition to practicing informatics, practicing good manners
[16:03] <WyZeGuY> np
[16:03] <younder> Sorry to barge in on your egotrip like that..
[16:04] <leeijaw> I found a way to change to AHCI without reinstalling Windows.  Simply set next boot into safemode under Windows by either GUI or bcdedit.  Reboot into BIOS setup and change the setting and reboot again into windows safe mode.  It will automatically detects the change.
[16:04] <WyZeGuY> younder: who are you talking to?
[16:05] <leeijaw> then reboot again into Windows to see if anything works.
[16:05] <quadrathoch2> leeijaw great :)
[16:05] <oerheks> leeijaw, wrong channel
[16:06] <leeijaw> Definitely not.  I was trying to install Ubuntu 20.04 LTS
[16:07] <leeijaw> Ubuntu installer won't recognize my hard drive when SATA mode is set to RAID.
[16:09] <younder> leeijaw, if it is a RAID it is not a drive. It creates a new device which involves all the devices in the RAID. Also are you using BIOS to set up the RAID or Linux?
[16:11] <leeijaw> I guess it was not a RAID since I only have one SSD.  My new desktop pre-installed with Windows and the default BIOS setup is with SATA mode RAID on (Intel Rapid Restore Technology).
[16:11] <quadrathoch2> younder he is talking about SATA mode, which is a intel thing (afaik) so nothing to do with actual RAID
[16:13] <younder> leeijaw, lol. OK. soory
[16:17] <Mat63> When you install ubuntu, on the disk, it may be that you do not have default options, to use a logical partition that I create myself?
[16:18] <Mat63> and that rather it is installed where "it feels like it"?
[16:19] <leeijaw> I am now in the installation wizard now.  I tick the "install third-party software for graphics and wifi hardware and additional media formats".  It asks me to set up Secure Boot. What is that?
[16:19] <Mat63> I admit that I do not yet have the technical ability to know how to do certain things
[16:20] <oerheks> secure boot/uefi, that is oke
[16:20] <oerheks> !uefi
[16:28] <sorcerer> any idea why when i hit the right arrow it key it moves the screen im using over half screen at a time?
[16:28] <sorcerer> right arrow key*
[16:31] <leeijaw> Is btrfs worth setting up?
[16:31] <leeijaw> or zfs?
[16:31] <mmarconm> leeijaw: depends
[16:33] <FutureRich> can i install driftnet on ubuntu?
[16:33] <mmarconm> if you computer/notebook has more than 8gb of ram, you could give a try on ZFS
[16:33] <quadrathoch2> FutureRich https://packages.ubuntu.com/focal/driftnet ?
[16:33] <oerheks> !zfs
[16:34] <FutureRich> quadrathoch2, what do you mean?
[16:34] <leeijaw> I have 16 GB.  I tried BTRFS before and see practical gains on my own side.
[16:34] <oerheks> quadrathoch2, interesting responce; what do you mean?
[16:34] <oerheks> :-D
[16:34] <leeijaw> No practical grain
[16:34] <mmarconm> xD
[16:34] <leeijaw> gain
[16:34] <quadrathoch2> he was looking for installing driftnet xD
[16:34] <FutureRich> how can i install drift net?
[16:34] <FutureRich> help me plz
[16:35] <FutureRich> i m too tired now
[16:35] <leeijaw> I believe ex4 will be sufficient for most of my use case.
[16:35] <mmarconm> first, what is drifnet : )
[16:35] <mmarconm> sorry for the question
[16:35] <leftyfb> FutureRich: you install it like any other package
[16:35] <coconut> FutureRich, you can check it with apt policy driftnet
[16:35] <FutureRich> oh
[16:35] <oerheks> hint: it is in universe
[16:35] <FutureRich> thansk leftyfb and coconut
[16:35] <mmarconm> leeijaw: use ext4, i think will be the best for u
[16:35] <mmarconm> i used zfs on freebsd a long time ago
[16:38] <leftyfb> FutureRich: i'm going to take a wild guess with all the discussion around kali, ip_forward, driftnet an your refusal to read documentation or explain your goals that your goals are either legitimate pentesting or the more likely, malicious behavior. Please take the time to read the almost infinite amount of documentation online about what it is you are trying to work out before asking here. And also, don't do stupid things. It's not worth it.
[16:39] <Mat63> How to interpret the test bench data?
[16:40] <FutureRich> leftyfb, you are wrong idea. i don't do it like you said
[16:40] <leftyfb> FutureRich: then you should have no problem explaining your goals when asking for help
[16:40] <FutureRich> it is privacy of min
[16:40] <FutureRich> e
[16:41] <FutureRich> you don't need to know it
[16:41] <oerheks> volunteers need some info. without, you are on your own.
[16:41] <FutureRich> privacy is very import to live now
[16:44] <Mat63> Average read rate: 20.2 Mb / sAverage write rate: 3.3 Mb / sAverage access time: 0.87 msec
[16:45] <Mat63> Are these values bad, fair or good?
[16:45] <oerheks> for a sata2 disk, not bad
[16:46] <Mat63> (It is an 8Gb usb memory)
[16:46] <leftyfb> FutureRich: if privacy is important to you, you might be interested in the Description for the driftnet util you are asking about. http://manpages.ubuntu.com/manpages/trusty/man1/driftnet.1.html#description
[16:47] <leftyfb> "Driftnet watches network traffic, and picks out and displays JPEG and GIF images for display.  It is an horrific invasion of privacy and shouldn't be used by anyone anywhere."
[16:47] <oerheks> perfect for kali-noobs
[16:48] <FutureRich> leftyfb, you are too worried but i don't do anything :(
[16:48] <FutureRich> leftyfb, don't worry i m not strange
[17:00] <FutureRich>   CryptographyDeprecationWarning <--- it mean that i can use app or not?
[17:00] <FutureRich> usr/local/lib/python2.7/dist-packages/cryptography/__init__.py:39: CryptographyDeprecationWarning: Python 2 is no longer supported by the Python core team. Support for it is now deprecated in cryptography, and will be removed in a future release.
[17:00] <FutureRich>   CryptographyDeprecationWarning,
[17:00] <FutureRich> it mean that i can use app or not?
[17:02] <oerheks> error is clear?
[17:02] <FutureRich> what it mean? i can use app ?
[17:02] <FutureRich> oerheks, ?
[17:03] <oerheks> error says no
[17:03] <FutureRich> no?
[17:03] <FutureRich> i can't use app?
[17:04] <oerheks> interesting, keep on asking
[17:04] <oerheks> oh, we do not support kali here.
[17:17] <FutureRich> can i know what it means? Failed to create secure directory (/root/.config/pulse): Permission denied
[17:18] <leftyfb> it means you're doing something wrong
[17:18] <oerheks> we love to wild guess ..
[17:18] <mr_lou> I can call do-release-upgrade from a terminal to starte an upgrade. How do I do the same from X, to avoid doing it in a terminal?
[17:18] <leftyfb> FutureRich: FutureRich: and since you refuse to tell us what you are doing, we cannot help you
[17:19] <oerheks> mr_lou, how about the regulare update tool?
[17:19] <oerheks> !ltsupgrade
[17:19] <mr_lou> oerheks, Yea, sounds logical. But I'm not seing any "Upgrade available" anywhere when starting that. Weird.
[17:19] <leftyfb> mr_lou: the GUI upgrade tool will no allow you to upgrade to 20.04 till 20.04.1 is released
[17:20] <oerheks> afaik, after august 6 20.04.1 release, the upgrade path will be released
[17:20] <mr_lou> This is old 14.04 going to 16.04 and then to 18.04  (old Intel Compute Stick)
[17:20] <leftyfb> mr_lou: then I would highly recommend using the CLI
[17:20] <FutureRich> leftyfb, lol you did help me from yesterday lo
[17:20] <oerheks> oke, then you need the EOL upgrade method
[17:20] <oerheks> !eolupgrade
[17:21] <FutureRich> don't stop me only plz leftyfb
[17:21] <oerheks> with the old-versions part..
[17:21] <FutureRich> i don't need your help leftyfb
[17:21] <leftyfb> FutureRich: then stop asking
[17:21] <oerheks> FutureRich, then don't ask kali questions in here
[17:21] <FutureRich> i asked someone except you
[17:21] <oerheks> !kali | FutureRich
[17:22] <mr_lou> mkay thanks leftyfb
[17:22] <FutureRich> i never said about kali
[17:22] <FutureRich> :(
[17:22] <FutureRich> bye
[17:53] <cfoch> hello
[17:56] <oerheks> :-)
[17:59] <cfoch> Usually official open-source projects publish their source code in git repositories (github, gitlab, their own servers) but many of them are distribution-agnostic, so don't provide .deb packages, but just instructions on how to build the program from source code. Who creates official .deb packages for these kind of projects? How can I repeat the process that Ubuntu maintainers do to create these .deb packages?
[18:00] <TJ-> cfoch: we usually recommend getting the packages into Debian first, with a maintainer, then they'll automically be synced into Ubuntu
[18:01] <TJ-> cfoch: Debian has a Mentor programme to help new maintainers/packages get included and to find maintainers for packges that don't have one. Another route is to contribute the debianisation to the upstream project to make its acceptance into Debian easier
[18:04] <cfoch> In specific, I want to build https://launchpad.net/ubuntu/bionic/+source/ffmpeg to figure out why a program I have behaves different in Ubuntu Bionic... how can I start?
[18:06] <TJ-> cfoch: but ffmpeg is already debianised!
[18:07] <cfoch> I know it. But as I said I want to repeat the process that Debian package maintainers did to create the deb package.
[18:08] <TJ-> cfoch: oh, well in such a complex package that'd take some doing !
[18:08] <cfoch> Not because I want to contribute to Debian/Ubuntu repositories, but because I want to debug something.
[18:08] <cfoch> I want to put modify the code, package it, install it and see what happens.
[18:10] <catbeard> found a solution to the audio output switch issue
[18:10] <catbeard> https://github.com/adaxi/audio-output-switcher
[18:10] <catbeard> thought i would share
[18:11] <TJ-> cfoch: you can do that from the current package. Ensure the deb-src: stanzas are in APT's sources.list, 'apt update' then 'apt-get source ffmepg' then edit code. Best to make it a git repo locally to make handling it easier, then make Quilt-style debian/patches/ with the changes and bump the version with a ~$YOUR_VER in debian/changelog, or use "dch -i"
[18:12] <oerheks> and !build
[18:12] <TJ-> cfoch: see for Quilt https://wiki.debian.org/UsingQuilt
[18:14] <TJ-> catbeard: see also 3.2 of https://www.debian.org/doc/manuals/maint-guide/modify.en.html
[18:14] <TJ-> oops, sorry catbeard
[18:14] <TJ-> cfoch: see also 3.2 of https://www.debian.org/doc/manuals/maint-guide/modify.en.html
[18:18] <cfoch> TJ-: how do I do this part "Ensure the deb-src: stanzas are in APT's sources.list"
[18:19] <Mat63> (y)
[18:19] <cfoch> mmm...ahhh...
[18:19] <cfoch> ok, I see
[18:19] <TJ-> cfoch: identical line to existing deb: but starts "deb-src:" instead
[18:20] <Mat63> how are the steps to install google, from the terminal?
[18:20] <TJ-> Mat63: Google isn't installable
[18:21] <gnoob> install google?
[18:21] <cfoch> sudo apt install google
[18:21] <gnoob> do you mean chrome or something?
[18:21] <cfoch> I guess he/she refers to chrome
[18:21] <cfoch> he/she/x *
[18:23] <Mat63> ok
[18:23] <Mat63> =#
[18:23] <oerheks> get the chrome deb on the google page, it installs the repo and key
[18:23] <cfoch> Just download https://www.google.com/chrome/?brand=CHBD&gclid=EAIaIQobChMI1IX--ILp6gIVQ4CRCh1tRw0BEAAYASAAEgLSfPD_BwE&gclsrc=aw.ds
[18:23] <cfoch> dpkg -i package.deb
[18:23] <cfoch> or
[18:23] <cfoch> apt install ./package.deb
[18:23] <Mat63> yes
[18:24] <cfoch> the "./" is important
[18:24] <oerheks> double click works too
[18:24] <cfoch> mentioned terminal
[18:25] <Mat63> (y) (y)
[18:25] <Mat63> 2 click lol
[18:25] <TJ-> or just "apt install chromium-browser" and avoid the Google tracking
[18:25] <TJ-> !info chromimu-browser
[18:26] <TJ-> !info chromium-browser
[18:26] <oerheks> snap install chromium
[18:26] <TJ-> grrr @ snaps
[18:26] <oerheks> due to the horror code, not many packagers ..
[18:28] <Mat63> This is how the cookie breaks
[18:29] <coconut> bleh, since when "apt install chromium-browser" forwards to snap from inside apt?
[18:29] <quadrathoch2> coconut since chromium is only snap (20.04)
[18:30] <Mat63> Download the package, and double click, It seems that there is an administrator / program that installed everything correctly
[18:31] <Mat63> This Ubuntu 20.04 looks great
[18:31] <coconut> quadrathoch2, bad bad bad if you ask me..., it even auto-installs it without confirmation if i really want to do that.
[18:32] <TJ-> coconut: several packages do that in their postinst script. LXD is another
[18:32] <quadrathoch2> coconut yeah that's what I don't like about it. on the other hand what linuxmint does is also not correct (it blocks snap install chromium, and even snapd itself)
[18:33] <coconut> TJ-, i think it should at least ask me before doing snap things.(otherwise i would have just started snap by myself)
[18:33] <TJ-> coconut: I agree 100% - I disable snap via DNS now
[18:34] <TJ-> coconut: redirects to our own server that returns empty results
[18:34] <coconut> TJ-, what domain is that? for snap?
[18:35] <TJ-> coconut: snapcraft.io
[18:35] <coconut> thnx
[18:36] <oerheks> snaps are great
[18:36] <zutat> oh snap :(
[18:36] <cfoch> TJ-: why when I do "apt source ffmpeg" I get "ffmpeg-3.4.2" but according "apt changelog" last version is "7:3.4.8-0ubuntu0.2"
[18:36] <cfoch> according ffmpeg -version, my installed version is 3.4.8-0ubuntu0.2 too
[18:36] <cfoch> I have official packages
[18:36] <IntelCore> in=place Upgrade to 20.04.. have line at boot saying.. failed decode
[18:36] <oerheks> !info ffmpeg focal
[18:37] <compdoc> arent snaps slow to open?
[18:37] <oerheks> compdoc, maybe the 1st time due to the update check
[18:37] <TJ-> cfoch: did you enable source for focal-updates and focal-security ?
[18:37] <quadrathoch2> they are working on that compdoc
[18:38] <IntelCore> hi..
[18:38] <Mat63> On the Ubuntu website, there is a user manual to know how to use, someone who does not know?
[18:38] <IntelCore> intramfs can't read;
[18:38] <oerheks> IntelCore, what are you trying to do?
[18:38] <IntelCore> failed decode
[18:39] <IntelCore> 20.04 boots but says it in a line, after grub
[18:40] <IntelCore> #2 thing is.. compiz don't werk
[18:41] <oerheks> compiz and gnome3??
[18:41] <IntelCore> yep
[18:42] <IntelCore> went to re-apt install it did not get new..
[18:43] <oerheks> please explain what you try to do, what guide do you follow?
[18:44] <Mat63> How can I start to repair damaged discs?
[18:45] <oerheks> Mat63, live iso and the filesystemtroubleshoot wiki
[18:45] <oerheks> https://help.ubuntu.com/community/FilesystemTroubleshooting
[18:46] <Mat63> Thanks, you are fast cowboy
[18:46] <IntelCore> https://askubuntu.com/questions/1250289/is-it-possible-to-use-compiz-with-gnome-flashback-on-ubuntu-20-04
[18:46] <IntelCore> unrelated to intramfs .. unable to decode (at boot)
[18:48] <oerheks> so, you switched to "GNOME Flashback (Compiz)" session during login.
[18:48] <oerheks> ?
[18:49] <IntelCore> https://askubuntu.com/questions/1245458/getting-the-message-0-283078-initramfs-unpacking-failed-decoding-failed-wh
[18:49] <cfoch> TJ-: good, as expected now
[18:49] <IntelCore> yes was already -always in flashback/compiz
[18:50] <IntelCore> upgrade took place in that too
[18:52] <usr1987> Hello world!  I had a question regarding snap.  I have removed it and after trying to install something from repos find nothing.  Is 20.04 only installing apps from snaps?
[18:53] <IntelCore> Relevant bug report: Bug #1835660  hp15Silver laptop 15-ac143wm
[18:53] <oerheks> usr1987, if you disabled snaps, lots of software will not be found, hahah
[18:53] <IntelCore> tyvm
[18:54] <oerheks> !snap
[18:54] <IntelCore> but i dunno wha with compiz
[18:54] <oerheks> IntelCore, me neither
[18:54] <oerheks> i miss wobbly windows though
[18:55] <usr1987> ubottu:  I know... I just find them slow even on my i5, 16gb with nvme drive
[18:55] <IntelCore> hmm, I only see 1 desktop bottom right side..not 4, and can't cude
[18:55] <IntelCore> snap use chrome?
[18:56] <IntelCore> some posted it does
[18:56] <oerheks> no, chromium-browser
[18:56] <IntelCore> yea
[18:57] <IntelCore> cas of that, they complain
[18:58] <IntelCore> anywhoo..i chk ccsm settings
[19:08] <TJ-> IntelCore: I updated the initramfs bug report with details of why the message appears
[19:08] <oerheks> lz compression issue
[19:09] <oerheks> compress=gzip in /etc/initramfs-tools/initramfs.conf fixed it. https://askubuntu.com/questions/1245458/getting-the-message-0-283078-initramfs-unpacking-failed-decoding-failed-wh
[19:09] <oerheks> but that would be an awkward fix..
[19:10] <TJ-> not necessarily; there seems to be a problem related to Ubuntu initramfs images having multiple parts, some uncompressed. Specifically, the early microcode part is not compressed so the kernel assumes the entire file is not compressed
[19:10] <TJ-> that early microcode part is prefixed to the compressed rootfs
[19:11] <quadrathoch2> oerheks or rebuilding a new initramfs fixes it
[19:11] <IntelCore> 14.04 when I started.. 16.04 reduced and partial upgraded to 18.04..before this 20.04
[19:11] <IntelCore> this 20.04 removed a load of things..
[19:18] <IntelCore> bottom bar pushes icons to the right now.
[19:19] <oerheks> Is there a question in that?
[19:19] <IntelCore> software&updates-cache refresh..long time?
[19:20] <oerheks> spawning random observations, i am out.
[19:20] <IntelCore> oerheks,  no.. just noticing.
[19:20] <IntelCore> ty tho
[19:23] <lionrouge> hi !
[19:23] <lionrouge> I'm trying to install Epson drivers for my printer
[19:23] <cfoch> TJ-: I have the source code now from doing "apt source ffmpeg" ... how do I create a deb package from it?
[19:23] <lionrouge> but the distribute them as *.deb.tar.gz
[19:23] <lionrouge> and when I unpackit I get a directory
[19:23] <lionrouge> tried to make a .deb package from it with dpkg-deb but it doesn't work
[19:23] <lionrouge> how can I unpack it to 1 file?
[19:28] <MrSteve> ffmpeg..
[19:29] <MrSteve> https://ffmpeg.org/
[19:29] <oerheks> !build
[19:35] <MrSteve> software updater hung
[19:39] <furkan> Repeating this question that I asked maybe a couple of days ago: I have a strange issue on my laptop (Ubuntu 20.04), which popped up some time over the last few weeks (never experienced it before that): I open a text file in gedit or some other program, and type some stuff and just leave the laptop idle. After some random amount of time, it will backspace all by itself until the whole file is erased, and
[19:39] <furkan> starts to beep continuously like gedit does when you hit backspace on an empty file, until I mash some keys to make it stop. After that, my backspace key sometimes stops registering, until I hit shift+backspace which seems to "fix" it for a while. Does anybody have some tips on how I could troubleshoot this? Somebody here suggested that I create another user account to see if the same thing happens with that,
[19:39] <furkan> and it does. But when I boot into Windows I don't have this issue (nor did I with Ubuntu 18.04 to 19.10 for the past 2 years).
[19:41] <TJ-> cfoch: "sudo apt-get build-dep $PACKAGE" then in the base directory "fakeroot debian/rules binary"
[19:41] <gnoob> furkan: any chance you just need some compressed air to blow it out?
[19:42] <MrSteve> some time passes..
[19:42] <furkan> gnoob: in Ubuntu it usually just takes a few minutes to happen, but I left Windows running overnight and nothing happened... so I don't think it's a physical issue
[19:44] <TJ-> furkan: could be an ACPI issue with newer kernels - a regression or possibly tighter implementation fo the ACPI interpreter. Possible workaround: https://iam.tj/prototype/enhancements/Windows-acpi_osi.html
[19:46] <furkan> TJ-: thanks a lot i will try this
[19:46] <MrSteve> software updater won't close
[19:46] <MrSteve> spinning pointer
[19:49] <MrSteve> compiz install is vers. 0.9.14.1
[19:53] <MrSteve> how to see what the distribution upgrade removed?
[19:54] <TJ-> MrSteve: /var/log/apt/ and I think there will also be a /var/log/dist-upgrade/ or upgrade/ or some such
[19:55] <MrSteve> oh tyvm TJ
[20:03] <MrSteve> python3-compizconfig:amd64 (1:0.9.14.1+20.04.20200211-0ubuntu1, automatic)
[20:04] <MrSteve> that.. killed my compiz functionality.
[20:04] <MrSteve> py 2.7 onboard
[20:05] <MrSteve> you think if get python 3?
[20:07] <oerheks> focal comes with python3 solely .. https://wiki.ubuntu.com/FocalFossa/ReleaseNotes
[20:07] <oerheks> as python2.7 is EOL, dead jim
[20:07] <MrSteve> whoa
[20:07] <MrSteve> applications showing 2.7
[20:08] <MrSteve> 2.7 18rc1
[20:10] <MrSteve>  compiz:amd64 (1:0.9.13.1+18.04.20180302-0ubuntu1, 1:0.9.14.1+20.04.20200211-0ubuntu1)
[20:10] <MrSteve> lets look for py 3
[20:11] <oerheks> let us know when you find it :-P
[20:12] <MrSteve> hmm..
[20:15] <Sven_vB> it seems there's no longer a package xubuntu-restricted-extras in focal, has it been renamed/merged or something?
[20:17] <MrSteve> software updater spinning still
[20:20] <jeremy31> Sven_vB: Might be part of ubuntu-restricted-extras now
[20:20] <jeremy31> Make xubuntu-restricted-extras a transitional package depending on
[20:20] <jeremy31>     ubuntu-restricted-extras
[20:20] <Sven_vB> thanks!
[20:26] <MrSteve> Python 3.8.2  found (edit menus)
[20:26] <MrSteve> compiz not py 3?
[20:28] <MrSteve> looks like everything is installed, but ctrl+alt+mouse, and other keys do not affect desktop
[20:44] <MrSteve> bbiab re
[20:54] <Intelo> I cannot write to ntfs partitions as before since I upgraded from 18 to 20.x ubuntu version. What should I do?
[20:56] <tomreyn> whats the error message, which action fails exactly?
[20:56] <Intelo> tomreyn: readonly filesystem
[20:56] <Intelo> for mkdir
[20:56] <tomreyn> run chkdsk /F on it in windows
[20:56] <oerheks> sounds like dirty bit set; faulty filesystem or files, run a fsck
[20:57] <Intelo> oerheks: was working before dist upgrade
[20:57] <Intelo> actually all partitions
[20:57] <Intelo> I have 3 I think
[20:57] <oerheks> sure, and now it is not.
[20:57] <Intelo> ok, runing fsck
[20:58] <MrSteve> if any ask.. install distribution upgrade, compiz needs ALL settings rechecked.
[20:59] <Intelo> oerheks: how to check ntfs with fsck again?
[20:59] <oerheks> best do that from windows
[21:00] <oerheks> https://help.ubuntu.com/community/FilesystemTroubleshooting
[21:01] <MrSteve> about decode bug, do I just ignore and wait ?
[21:02] <tomreyn> MrSteve: if you 're hoping to get help with anything here, be sure to provide !details
[21:03] <oerheks> MrSteve, wait for what? compiz is a gnome2 relic
[21:03] <tomreyn> there are probably not a lot of people using compiz on anything later than and including 18.04
[21:06] <Intelo> oerheks: corrected, thanks
[21:07] <Intelo> oerheks: I wonder why would an upgrade make partition dirty
[21:07] <MrSteve> Well..it works.
[21:08] <MrSteve> TJ said he/she updated the bug report for this..
[21:09] <MrSteve> bug 1835660 in linux (Ubuntu) "initramfs unpacking failed" [High,Confirmed]
[21:09] <MrSteve> so I just wait
[21:16] <Intelo> Isn't my / on /dev/sda<some> ? whats /dev/mapper?? https://paste.ubuntu.com/p/C5N4CbRMmt/
[21:19] <quadrathoch2> Intelo you have installed ubuntu on a lvm partition. https://wiki.ubuntu.com/Lvm
[21:19] <Intelo> quadrathoch2: oh yes.
[21:19] <Intelo> so how do I fsck it?
[21:21] <quadrathoch2> just normal which would be fsck /dev/mapper/kubuntu--vg-root
[21:22] <MrSteve> trying to repair?
[21:25] <MrSteve> https://askubuntu.com/questions/1124500/trying-to-repair-lvm-disk-with-fsck
[21:26] <MrSteve> ty oerheks , ty compdoc , ty BashingOm ty helpers !
[22:22] <system619> When using Linux-Mint virtual-box Do I need to have the ISO of the OS That I want to Emulate?
[22:24] <gnoob> system619: you want to run another OS inside linux mint?  I am not an expert but I think you will need the .ISO.
[22:27] <tomreyn> system619: this channel supports ubuntu only
[22:33] <system619> gnoob thx br0
[22:34] <system619> The only reason why I came in here is cuz linux-mint is ubuntu
[22:34] <jeremy31> system619: try #linuxmint-help on spotchat IRC or forums.linuxmint.com
[22:34] <system619> jeremy31: thank you
[22:34] <oerheks> people still using mint?
[22:34] <system619> lol
[22:34] <jeremy31> system619: if you have Mint installed, see the welcome window, support, irc chat
[22:35] <system619> there is no welcome screen anymore, but thank again.
[22:35]  * gnoob going to joint #mint
[22:37] <gnoob> so you can't leave us hanging what's wrong with linux mint?
[22:38] <jeremy31> gnoob: ask in #ubuntu-offtopic
[22:38] <oerheks> they have their own issues.
[22:39] <gnoob> jeremy31: will do. Will stay more on topic from now on.
[22:52] <ondrejoda> Hello everyone! I have been trying to make Xdmx work with my two laptops, but I keep getting errors which go like this: "xinit: XFree86_VT property unexpectedly has 0 items instead of 1". Can anybody help me fix this issue?
[22:53] <tatertotz> ondrejoda: looks like you didn't configure correctly, at least 1 is expected where you have ZERO
[22:54] <tatertotz> ondrejoda: you probably should find some documentation to follow
[22:54] <tatertotz> ondrejoda: or reference
[22:55] <ondrejoda> tatertotz: i mean, i scouted through google and couldnt find anything
[22:55] <ondrejoda> tatertotz: no man page as well
[22:56] <ondrejoda> tatertotz: the command i am using is startx -- /usr/bin/Xdmx +xinerama -display licalhost:11.0 - display :0.0 -norender .ignorebadfontpaths
[22:56] <tomreyn> licalhost:11.0
[22:56] <ondrejoda> just noticed it
[22:56] <ondrejoda> *localhost
[22:56] <tomreyn> - display
[22:57] <ondrejoda> also, everything is going through an ssh tunnel
[22:58] <Kon> If I'm upgrading from Bionic to Focal, is it necessary to ppa-purge everything? What about locally compiled software?
[22:58] <Kon> I've heard conflicting opinions on this
[22:58] <ondrejoda> I remember going from mint 18.1 to 19.1, i didnt do anything like that and everything worked just fine
[22:59] <tomreyn> Kon: i say, yes, i know others who do, too, and i have not seen anyone saying you don't need to.
[22:59] <quadrathoch2> ondrejoda as long as your ppas are supporting the newer version, that should be fine. but it's not always teh case
[23:00] <tomreyn> ondrejoda: which ubuntu version are you running where you are trying to use Xdmx?
[23:00] <ondrejoda> ubuntu 19.10 and lubuntu 18.10
[23:01] <tatertotz> ondrejoda: have you EVER successfully done xdmx before? yes / no
[23:01] <ondrejoda> never
[23:02] <ondrejoda> this is my first time
[23:02] <TJ-> "note that GLX support and default display bit depth are common issues that will prevent Xdmx from running correctly."
[23:02] <ondrejoda> i tried it with and without the -noglxproxy argument, both not working
[23:03] <ondrejoda> note: both of my computers dont have graphics cards
[23:03] <tatertotz> ondrejoda: hmm seems like a complex task that only very advanced users should attempt, many things need to be configured and verified excluding the additional layer of complexity of your tunnel
[23:03] <ondrejoda> damn
[23:04] <tatertotz> ondrejoda: good luck on that though
[23:04] <ondrejoda> i mean, i would love to do it without ssh, but the thing is i dont know how
[23:04] <tomreyn> ondrejoda: also please note that both of the releases yoiu quoted are !eol
[23:05] <TJ-> ondrejoda: if the PCs don't have graphics cards how are they able to drive a display!?
[23:05] <ondrejoda> APU
[23:06] <ondrejoda> AMD E2-7110 1.8ghz and Intel Celeron clocking at a whopping 1.6ghz!
[23:06] <tatertotz> ondrejoda: IMO ...you've bit off too much there...trial and error until success
[23:07] <ondrejoda> oh
[23:07] <TJ-> so there /is/ a GPU, just it's integrated Radeon R2 into the CPU package!
[23:08] <ondrejoda> jup
[23:08] <ondrejoda> pain to play with
[23:09] <TJ-> ondrejoda: also bear in mind that xdmx has very few casual users; mostly its used in combination with tools like Chromium for specialist/large display walls
[23:10] <ondrejoda> oh
[23:11] <analogical> I need a tool can do bulk rename of filenames
[23:11] <tatertotz> ondrejoda: there are six steps minimal for a xdmx configuration, only for advanced users especially if the terminology of the six steps reads like a foreign language to you
[23:12] <tatertotz> ondrejoda: To establish an Xdmx desktop involves the following steps automated so that the construction appears transparent:
[23:12] <quadrathoch2> analogical doesn't the tool help where you have multiple files selected and then click rename?
[23:12] <tatertotz> ondrejoda: 1. on each system configure and initiate a minimal X session; a minimal twm session is enough
[23:12] <quadrathoch2> don't know if ithas a name (but it's in nautilus - files)
[23:12] <ondrejoda> yes
[23:12] <tatertotz> ondrejoda: 2. authorise the master system to access X resources on each remote system (use xhost +)
[23:12] <ondrejoda> ok i will have to look that up
[23:12] <tatertotz> ondrejoda: 3. install xorg-server-xdmx[broken link: package not found] on the master system
[23:13] <tatertotz> ondrejoda: 4. initiate a minimal X session on the master system
[23:13] <tatertotz> ondrejoda: 5. configure the desired Xdmx session
[23:13] <ondrejoda> hold up
[23:13] <analogical> quadrathoch2, I don't understand how that tool works
[23:13] <tatertotz> ondrejoda: 6. initiate the Xdmx session with an appropriate window manager as a working desktop
[23:13] <ondrejoda> apt cant find the package on pint 3
[23:14] <ondrejoda> *point
[23:14] <TJ-> !info xdmxconfig | ondrejoda  have you tried using
[23:14] <tatertotz> ondrejoda: and if all that sounds like a foreign language.....you're in over your head....and you should probably find something else to do
[23:14] <ondrejoda> ubottu: i am using eoan
[23:14] <TJ-> !info xdmx-tools | ondrejoda  and use 'xdmxconfog'
[23:15] <ondrejoda> ok apt found that, thanks!
[23:15] <analogical> I need a tool can do bulk rename of filenames
[23:15] <TJ-> my typing is going to pot! "xdmxconfig" - see "man xddmxconfig"
[23:15] <quadrathoch2> analogical https://www.how2shout.com/how-to/how-to-batch-rename-multiple-files-on-ubuntu-using-file-manager-or-krename.html maybe this helps
[23:15] <TJ-> grrr again!
[23:16] <ondrejoda> TJ: the command is working and dont worry about the tying
[23:16] <tatertotz> ondrejoda: At present either Xdmx itself or the current state of window managers do not work well together for complex arrangements of multihead set-ups; the server tends to crash as soon as window drawing is required after the integrated desktop has been established.
[23:17] <TJ-> analogical: you asked this question over an hour ago in ##linux and were given all the same suggestions then; in that time you've prevaricated and found excuses to not try them.
[23:17] <ondrejoda> tatertotz: that is exactly what happens, all screens go black, and then the error.
[23:18] <tatertotz> ondrejoda: that is expected
[23:18] <tatertotz> ondrejoda: very ambitious effort though
[23:18] <TJ-> ondrejoda: any logs in /var/log/ for it on any of the hosts?
[23:18] <analogical> quadrathoch2, thanks!
[23:18] <ondrejoda> TJ-, will check
[23:19] <tatertotz> ondrejoda: it's well known
[23:19] <ondrejoda> oh, a little detail, my ubuntu installation for the AMD APU is using budgie
[23:19] <ondrejoda> not gnome
[23:19] <tatertotz> ondrejoda: no matter what you're using it doesn't exempt you from the following
[23:20] <tatertotz> ondrejoda: At present either Xdmx itself or the current state of window managers do not work well together for complex arrangements of multihead set-ups; the server tends to crash as soon as window drawing is required after the integrated desktop has been established.
[23:22] <ondrejoda> yeah, but tatertotz, i am doing only 2 screens, nothing complex
[23:24] <TJ-> ondrejoda: get it working on a single screen to begin with
[23:25] <TJ-> I recall writing an xdmx config and I'm sure I published it somewhere
[23:26] <ondrejoda> TJ-, ok, ill attempt to do that :D
[23:30] <ondrejoda> TJ-, sorry i left, my computer crashed
[23:31] <ondrejoda> because of xdmx
[23:31] <ondrejoda> :(
[23:32] <tomreyn> !eoan | ondrejoda
[23:32] <ondrejoda> what
[23:32] <ondrejoda> oof
[23:32] <ondrejoda> ok
[23:32] <ondrejoda> i didnt know that
 ondrejoda: also please note that both of the releases you quoted are !eol
[23:33] <ondrejoda> welp, thats what you get when your internet speed is 256 kb/s
[23:34] <tomreyn> you miss lines on irc?
[23:35] <ondrejoda> TJ-, ok, new error for xdmx: GDBus.Error:org.freedesktop.PolicyKit1.Error.Failed: An authentication agent already exists for the given subject
[23:35] <leftyfb> ondrejoda: I count at least 6 internet cafe's in your area
[23:36] <ondrejoda> nope
[23:36] <ondrejoda> define area
[23:36] <leftyfb> Gaborone
[23:36] <ondrejoda> what?
[23:36] <ondrejoda> how?
[23:37] <leftyfb> https://www.google.com/maps/search/internet+cafe/@-24.6543518,25.8962449,13.23z
[23:37] <ondrejoda> but how did you know i was there?
[23:37] <leftyfb> ondrejoda (~ondrejoda@41.223.73.187) has joined #ubuntu
[23:38] <ondrejoda> oh
[23:38] <ondrejoda> ok
[23:38] <leftyfb> ondrejoda: either way, I would recommend maybe hitting up one of those cafe's to download 20.04
[23:38] <ondrejoda> ok
[23:40] <ondrejoda> wait, how do i upgrade again?
[23:40] <leftyfb> !upgrade | ondrejoda