 @fredldotme [I'm working on the Pixel 3a. I remember someone working on a port for the origin …], Thx
[05:31] <ubptgbot> Eliza was added by: Eliza
 (Photo, 960x1280) https://irc.ubports.com/yZm2Ujto.png
 I‘m installing Ubuntu touch in my Nexus 5, but it’s hanging at “installing updates”. What should I do?
 @Eliza [<reply to media>], That screen doesnt look right
 Install twrp and format every partition maybe
 Ok, I will try that
 Ok, I wiped every partition, I‘m going to go back into recovery and try again
 It worked! Thank you!
 @Eliza [It worked! Thank you!], welcome!
 @Javacookies [Oh really? I thought Xperia X is somewhat already on the same level as the usual …], Are we near a solution to the lack of movie with camera app ?
 @livrecinq [Are we near a solution to the lack of movie with camera app ?], No, video recording is still broken for arm64 devices. You could flash 32bit rootfs and its likely to work there
 @Flohack [No, video recording is still broken for arm64 devices. You could flash 32bit roo …], Hm, I got it working on Volla Phone. Does it crash in media-hub?
 @NotKit [Hm, I got it working on Volla Phone. Does it crash in media-hub?], I am not sure will have to analyze. Ratchanan said its only certain 64bit devices, so yes perfectly Ok if it works for you ^^
 @livrecinq [Are we near a solution to the lack of movie with camera app ?], If you use 32bit = armhf = devel channel on Xperia X and install gst-droid camera app variant video works.
 @Danfro [If you use 32bit = armhf = devel channel on Xperia X and install gst-droid camer …], Yeah thats what I meant ^^
[09:39] <ubptgbot> supirlelik96 was added by: supirlelik96
 Hello help please I have a short press on the power button turns off the window and this greatly interferes with how to disable this window or make it pop up when you hold it for a long time
 @supirlelik96 [Hello help please I have a short press on the power button turns off the window …], Sorry I dont understand your problem
 @Flohack [Sorry I dont understand your problem], When I block the screen I get a window to turn off the device and this greatly interferes with how to disable this window?
 @supirlelik96 [When I block the screen I get a window to turn off the device and this greatly i …], Ah you mean, when you try to unlock/lock phone with power button, a dialog shows up asking for you to power off or reboot
 @ItsMeShouko [Ah you mean, when you try to unlock/lock phone with power button, a dialog shows …], yes!
 @supirlelik96 [When I block the screen I get a window to turn off the device and this greatly i …], Are you porting a new device?
 @supirlelik96 [Hello help please I have a short press on the power button turns off the window …], Which device?
[10:30] <ubptgbot> MSHmouh was added by: MSHmouh
[10:38] <ubptgbot> <Benni S> Wow! Hotspot works with UBports on pinephone! That did not work some time ago... Wohoo!
 Hi, I have a ce pinephone and I'm trying to activate the dev mode (https://docs.ubports.com/en/latest/userguide/advanceduse/adb.html). I don't have that option in the About screen and if I search for "Developer" in settings it only shows me the "About" section as it should. When I click on it there is no developer option
[10:43] <ubptgbot> <Benni S> [Edit] Wow! Hotspot works with UBports on pinephone! That did not work some time ago... Wohoo! … [EDIT] It's not stable at all though.
 @Fuseteam [Which device?], Xiaomi redmi 7  onclite
 (Photo, 1280x960) https://irc.ubports.com/j0A3cWX0.png
 (Photo, 960x1280) https://irc.ubports.com/Rc1VMqr3.png
 (Photo, 1280x960) https://irc.ubports.com/a0vHASiM.png Hi guys.  Im wondering if i can install ubuntu touch in my old android 4.1.1 tablet..?? And also if i can use Nexus 7 2013 WiFi .?? Because my device not listed..
 (Photo, 1280x960) https://irc.ubports.com/CH37rVlB.png
 (Photo, 1280x960) https://irc.ubports.com/h0UttrNr.png
 N7 2013 is listed: https://devices.ubuntu-touch.io/ … And in short, what is not listed is not available.
 @MSHmouh [<reply to media>], Probably not on Condor ,but on nexus 7 2013 you can easily install ubuntu touch
 @supirlelik96 [Probably not on Condor ,but on nexus 7 2013 you can easily install ubuntu touch], i want to try on my condor ..its ok if its burn 😂
 @agentjrt [Hi, I have a ce pinephone and I'm trying to activate the dev mode (https://docs. …], adb doesnt exist on pinephone
 so how do I install click packages that are built via clickable then?
 ssh is a good way
 chickable has ssh option
 or i send them through telegram in the browser
 wifi doesn't work since 2 days on my device
 it works under arch, but I wanted to do a few tests on the masterbranch of the asteroidos app
 @agentjrt [so how do I install click packages that are built via clickable then?], There is an ssh mode already
 Yes sorry already answered
 @Flohack [There is an ssh mode already], jep, but wifi doesn't work for me
 How do I remove a package via cli? pkcon finds the package with "get-packages" but it doen't find it with "remove" prameter
 @agentjrt [jep, but wifi doesn't work for me], Hmm thats strange are there any other ppl reporting this?
 I cant believe we break wifi even in devel
 Hi @jrt nice to read you here ;-)
 (Photo, 1280x161) https://irc.ubports.com/AAmveRD4.png
 @supirlelik96 [Xiaomi redmi 7  onclite], yes that is a new ported device, if your the porter i would suggest you join @ubports_porting
 @hummlbach [Hi @jrt nice to read you here ;-)], u here. Nice to read u2 :D
 @agentjrt [<reply to media>], maybe try including version number?
 Maybe you'd like to join the ubports app dev group. Its a better place to discuss things around clickable etc
 @MSHmouh [i want to try on my condor ..its ok if its burn 😂], then you may try porting it take a look at docs.halium.org for the requirements
 @Flohack [maybe try including version number?], nope
 what do you mean nope 👀
 @Fuseteam [what do you mean nope 👀], Does not work obviously
 ah lol i see
 @Fuseteam [what do you mean nope 👀], Package not found: telescope.asteroidos-0.0.5
 :D
 @agentjrt [Package not found: telescope.asteroidos-0.0.5], Type the full name as listed
 inc arm64
 already tried that
 well then
 unlucko ^^
 but pkcon is in theory the right package manager to use correct?
 maybe try asteroidsyncserviced?
 yes think so
 @Fuseteam [maybe try asteroidsyncserviced?], No that are the installed executables from that package
 @Fuseteam [maybe try asteroidsyncserviced?], tried that too :D
 It makes no sense to try this
 haha i see
 @agentjrt [but pkcon is in theory the right package manager to use correct?], Theres another on, but pkcon should do as ell
 @agentjrt [but pkcon is in theory the right package manager to use correct?], [Edit] Theres another on, but pkcon should do as well
 I tried also via GUI, but openstore won't show installed packages without wifi
 maybe install the la— ohw no internet hmmmm
 what about usb tethering?
 does that work on the pinephone?
 usb only works for charging. I'm not sure if that's related to the HW issue tho
 welp then i'm out of ideas
 @Fuseteam [does that work on the pinephone?], No
 yes i gathered that rodney
 pkcon remove requires typing in the info in a specific format I don't recall
 You can use `sudo click remove` or whatever it is though
 @dohbee [You can use sudo click remove or whatever it is though], click: error: unknown command: remove
 unregister maybe then ask the help for it
 sudo click <tab><tab> :^3
 GLib.Error: click_user_error-quark: telescope does not exist in any database for user phablet (7)
 ohh
 but it is there and I can launch it
 oh my
 maybe I should just reflash a current image
 click list
 @agentjrt [GLib.Error: click_user_error-quark: telescope does not exist in any database for …], did you install it with sudo or something? …  lol
 You need the package name
 Unable to find application for 'telescope.asteroidos_asteroidsyncserviced_0.0.5': Invalid app ID: telescope.asteroidos_asteroidsyncserviced_0.0.5
 nope
 Which is not telescope
 I installed it via the open store
 Only the first part is package name
 perhaps `click list|grep telescope` like rodney said
 I copied the name from click list
 telescope.asteroidos
 @agentjrt [Unable to find application for 'telescope.asteroidos_asteroidsyncserviced_0.0.5' …], And thats the output for that
 @Fuseteam [yes that is a new ported device, if your the porter i would suggest you join @ub …], ok
 argl... ok lets see how clickable does it...
 maybe that can help us: https://gitlab.com/clickable/clickable/-/blob/master/clickable/commands/install.py#L26
 <irony>pretty obvious... why didn't we try that from the start???</irony>
 `pkcon remove "xkcdviewer.arc676;0.3.2;all;local:click"`
 that worked for example
 for telescope it should probably be `pkcon remove "telescope.asteroidos;0.0.5;all;local:click"` then
 And for further discussions please let us switch over to https://t.me/UbuntuAppDevEN
 hello everyone. i am going to change the Ment Version to 2020 new one, did you guys test it? is it better than old one?
 @RZRady [hello everyone. i am going to change the Ment Version to 2020 new one, did you g …], this group is about https://ubuntu-touch.io and https://ubports.com not general linux distros
 Thank you sir. 👍
[13:54] <ubptgbot> ganomin was added by: ganomin
[13:58] <ubptgbot> gabodavo was added by: gabodavo
 Hello!
 So, I'm trying to install Ubuntu Touch, and it's failing boot. I noticed that there is a usb telnet connection, but I can't access it for some reason(it just hangs with "Trying 192.168.2.15").
 install to what device?
 Oops, forgot to mention. A G7 Power.
 This is with a newly build Halium kernel from a source tree I found.
 [Edit] Oops, forgot to mention. A Moto G7 Power.
 https://github.com/erfanoabdi/android_kernel_motorola_sdm632/tree/halium-9.0
 ok you should go to https://t.me/halium then as this is not yet a supported device by ubports-installer
 Ok
 Thank you!
 (Sticker, 512x512) https://irc.ubports.com/fvwwZNlw.webp
[15:39] <ubptgbot> Heather Vargas was added by: Heather Vargas
[15:47] <ubptgbot> Karl Kelso was added by: Karl Kelso
 Thanks for all of your answers !
 @Flohack [Yeah thats what I meant ^^], Thank you !
 https://youtu.be/KhV57_EH3AA
[18:41] <ubptgbot> darrelgriet was added by: darrelgriet
 dang it was just about to look at that video 😂
 @Flohack [No, video recording is still broken for arm64 devices. You could flash 32bit roo …], Florian, can it be done on the OP3? If so, how?
 @Marcos [Florian, can it be done on the OP3? If so, how?], I dont know yet. I think nobody really knows whats the issue
 Ok. Thanks!
[19:08] <ubptgbot> Mikey Goodson was added by: Mikey Goodson
 hurrr.....just a fast question here
 did anyone tried ubuntu touch for lavender? there is this community port going, but, i actually don't know if it's going well or if the devs are helping or even know about it
 @agentjrt [Hi, I have a ce pinephone and I'm trying to activate the dev mode (https://docs. …], thats a linux phone not an Android —- that will not work
 @Marathon2422 [thats a linux phone not an Android —- that will not work], you can have the adb daemon on non-android devices and the documentation said that you can connect via adb or ssh and wifi didn't work and usb ethernet adapters don't seem to work either
 @agentjrt [you can have the adb daemon on non-android devices and the documentation said th …], yeah otg doesn't work yet, so you can only use ssh at the moment, after getting wifi working
 maybe I should mention that the issue was fixed after a continued conversation in the dev group. Not that sombody here replies, thinking that the issue is unsolved
 yeah
 Can pidgin run on ubports without libertine?
 So that something like this can work? https://github.com/EionRobb/purple-discord
 you can try to package it into a click i guess