[00:30] <steve7233> Please hel[. I just tried to install virtualbox from https://www.virtualbox.org/wiki/Linux_Downloads , and the QApt package installer says "error can not satisfy depedences". How do I fix this?
[00:30] <steve7233> [18:29] [Error] Please: Unknown command.
 what version of kubuntu are you running?
 virtualbox/focal-updates 6.1.10 is in the 20.04 repos, thus I recommend installing that instead.
[00:38] <steve7233> Stupid program. konversation thought I wase entering a command but I was asking for help on getting virtualbox to install. QApt says, "can not satisfy depedancys". installing packge from, https://www.virtualbox.org/wiki/Linux_Downloads then, https://download.virtualbox.org/virtualbox/6.1.12/virtualbox-6.1_6.1.12-139181~Ubuntu~bionic_amd64.deb
[00:41] <steve7233> Kubuntu 20.04
 Did you find instruction to install bionic packages on focal?  Are you sure you downloaded the 20.04 version of VB?
[00:47] <steve7233> I just tried again and the file saver is asking me if I want to overwite the fille so yes I downloaded the correct one.
[00:48] <steve7233> website says Ubuntu 19i.10/20.04
[00:49] <steve7233> sticky keyboard.
[00:50] <oerheks> why not use the good packages from softwarecenter??
[00:51] <oerheks> "they" have no focal candidates https://download.virtualbox.org/virtualbox/6.1.12/
[00:52] <steve7233> an old post says that one is an OSE version and is not supported.
[00:52] <oerheks> yeah.. but no focal candidates
[00:52] <oerheks> you have to wait.
[00:56] <steve7233> I need it for Learnkey as the Linux version of Firefox appears not to work with their web site, so I am trying to run Win 10 Pro VM.
[00:56] <oerheks> ohh, use KVM
[00:57] <oerheks> https://getlabsdone.com/10-easy-steps-to-install-windows-10-on-linux-kvm/
[00:58] <steve7233> Thanks I will give it a try.
[00:58] <steve7233> Probaly have to rebuild my VM. That would suck.
[01:01] <steve7233> See you folks later.
[01:16] <steve7233> The instructions at https://getlabsdone.com/10-easy-steps-to-install-windows-10-on-linux-kvm/#Creation-of-Windows-10-KVM-VM do not work.
[01:22] <steve7233> OK. They have the wrong command. They say 'virt manager", but it should be "virt-manager".
[01:24] <steve7233> The virtual machine manager says 'QEMU/KVM - Not Connected'.
[01:53] <steve7233> where  can I get help setting up KVM?
 https://www.youtube.com/watch?v=7xUCfWGEa20
 Or this one might be better: https://www.youtube.com/watch?v=ozYKkaVK0_A
[02:11] <steve7233> IRc dosn't seem very helpful at the moment.
[11:48] <BluesKaj> Howdy all
 (Photo, 1076x940) https://irc-attachments.kde.org/iyKnO9BT/file_34753.jpg Hi, does anyone know how to add this option to plasma? It should work with Nvidia in the 'On Demand' mode, when I use the neveau drivers I saw a similar option trough the advanced settings of the launcher but when I switch to the nvidia drivers can't find the option
 Looks cool, I can't help you btw
 @Franzpow, I've been testing distros these days, the ones that have the option are Ubuntu, Pop_Os and Linux Mint, but I really like kubuntu/ Kde Neon, would be great to have that
 If anyone knows please 🙏
[12:54] <oerheks> with nvidia drivers installed, they are already activated?
[12:55] <oerheks>  sudo lshw -c video # would show
[13:18] <oerheks> can you describe the issue?
[13:50] <catalin> Hi!
[13:50] <catalin> Is there a way to see some logs. Entire computer crashes randomly at times. Mouse still moves on screen. Num Lock is frozen. Whole screen (except for mouse) is frozen.
[13:51] <catalin> Ctrl-Alt-Del repeatedly won't make the system restart.
[13:52] <catalin> I'm running Kubuntu 20.04
[14:04] <catalin> ??
[14:27] <matthew_> Hello is it possible to have a seperate theme for some applications. I want to use breeze dark however some applications break when using it (black text on black background).
[14:28] <diogenes_> matthew_, what applications?
[14:30] <BluesKaj> catalin, alt+space type konsole, in the konsole type reboot
[14:36] <matthew_> libreoffice is the only one i've noticed so far
[14:37] <catalin> crashed again just now
[14:37] <catalin> i'm back
[14:38] <catalin> crash happens following the entry: Catalin kernel: [131647.456973] nouveau 0000:03:00.0: Xorg[938]: nv50cal_space: -16
[14:38] <catalin> according to Google: nv50cal_space *basically* means the GPU has hung -- it's when we run out of IB space for pushbuf submission.
[14:40] <diogenes_> catalin, ask in /j #nouveau
[14:43] <diogenes_> matthew_, look in synaptip for libreoffice specific themes, other apps might even be gtk or some proprietary compiled with builtin libs like zoom or anydesk.
[14:44] <matthew_> thanks I'll have a look
[14:46] <catalinp86> [Channel] Cannot join channel (+r) - you need to be identified with services
[14:46] <catalinp86> despite registering a nick and all
 @Daniel, Could someone help me with this please? 🙏
 Daniel, did you install the NVidia drivers?
[15:38] <jwednesday> hi all I have an issue with my TouchPad not working after changing the hard drive to an SSD in a Dell n5010 with Kubuntu 20.04.1 installed. I tried several things prior to reinstalling the OS and I am stuck as to what to try next. Thanks
 Does the touchpad work when Live booted?
[15:39] <jwednesday> I didn't test that. brb
[15:54] <jwednesday> The answer is no the touchpad does not work
 The last item in this article says the touchpad can be toggled... by chance is this the problem? https://forums.linuxmint.com/viewtopic.php?t=270489
[15:58] <jwednesday> hold on. I tried the toggle but not under the circustances that you just mentioned. Let me try it again. When I toggled it prior, it kept saying it was off
[16:07] <jwednesday> In regard to the touchpad button, it says, "Touchpad Off"
 2 things to check: Sytem Settings -> Input Devices -> Trouchpad -> Gener: Device enabled.  If device is not available ensure the touchpad enabled in the BIOS.  Maybe BIOS needs updated?
[16:11] <jwednesday> I tried the system settings but have not done the bios update. I am struggling with it. I download the fill but cannot get "first boot" or initial boot to come up.
[16:11] <jwednesday> fill=file
[16:14] <jwednesday> I cannot get the usb to be bootable. There is a Ubuntu program but it does not exist in Kubuntu 20.04
 This might work (I have used UNetbootin several years ago): https://vander.host/knowledgebase/operating-systems/how-do-make-a-usb-bootable-dos-drive-to-update-a-pc-bios-using-linux/
[16:20] <jwednesday> I looked for it in Kubuntu 20.04 but it doesn't seem to exist.
[16:21] <jwednesday> am I wrong?
 Step 2: add the repository to enable unetbootin install.
[17:18] <jwednesday> ok, I ran the bios update and it went from A04 to A15. I found a driver for the Touchpad on the Dell site downloaded it and it would not run. The message says cannot run in DOS mode.
 Dell drives are typically on for window.  Ensure the TP is enable in the BIOS (I have never seen a BIOS toggle a touchpad, just going by the comments in the link above).  Also, did you try the shortcut toggle after the BIOS update?
 Maybe the toggle requires using the function key as part of the shortcut depending on the state of the function key8 default?
[17:23] <jwednesday> ok, let me check
[17:36] <jwednesday> ok, I checked in the bios and there is no TP setting. I checked in setting and under input devices the message says No Touchpad found. Under enable/disable Touchpad things are grayed out.
[17:37] <jwednesday> Is there some way I can run the exe file related to the TP?
[17:38] <diogenes_> jwednesday, tried reinstalling the driver?
[17:40] <jwednesday> the error I got was that I could not run in DOS mode. Is there something I should change? Also, I looked under keyboard and it says I am using the generic one and not Dell ... hmmm
 touchpad windows drivers do not apply to linux.
[17:42] <jwednesday> oh
[17:43] <jwednesday> I get it now ... I have not worked in the Windows world for a long time.
[17:45] <jwednesday> Do you think it has anything to do with XORG setting or permissions?
 cat /proc/bus/input/devices > ip.txt & kate ip.txt
 ctrl-f for touch
[17:48] <jwednesday> 1 sec
 I am reading off of the page: https://wiki.ubuntu.com/DebuggingTouchpadDetection
 but that webpage somewhat assume the touchpad is enabled and working.  From your description, I think your touch is disable via HW/BIOS.
[17:54] <jwednesday> the only weird one I see is HID 413c:8161 ... not sure what that is
[17:57] <jwednesday> the external mouse is working
[18:03] <jwednesday> I followed the remove of the synaptics
[18:10] <jwednesday> I uninstalled and reinstalled xserver-xorg-input-synaptics. When I went to reinstall it I saw at the top it said suggested packages ... gpointing-device-settings and touchfreeze. There are no apt-get packages and said referred bto by another package.
 @DarinMiller, Yes, I did that, everything went ok, I didn't have any error, after rebooting, I opened Nvidia xserver settings and changed the mode to 'On Demand' everything works fine, suspend works ok too, but I have to reconfigure my monitors every reboot
 Daniel, ensure to System Settings -> Display and Monitor -> Display configuration to arrange the monitor layout as that seems to have the "last say" for the configuration layout after reboot.
[18:17] <jwednesday> where would I find the nvidia settings?
 Under System Settings -> Settings  (or alt-spacebar and type nvdia-settings <enter>)
[18:20] <jwednesday> I don't have any nvidia settings
 @DarinMiller, I go there every reboot, and the settings are ok but the monitors are not according to that settings, I mean that the settings show me the primary monitor being the 2nd one but in real life is the first one, another interesting thing I forgot to mention is that every while the laptop monitor goes black and I have to change something in the display settings to make it work again.
[18:24] <jwednesday> interesting. Should I have nvidia installed? I have no issues when I reboot
 Not unless you have an Nvidia card.  My reply was directed at Daniel.  (Frustrating limitation of non-threaded chats....)
 Another interesting thing that I read in the forums and is true in my case, is that if I disconnect the 2nd monitor, reboot and connect the monitor again, it works fine and remembers the settings
 I have this problem with KDE Neon too, Ubuntu and Mint work fine, but I would like to switch to Kubuntu or Neon the following days
 I have a monitor that does not always wake from sleep before the video init completes (issue on both windows and linux).  I use this script (assign to kb shortcut meta+shift+f) to fix the sleeping monitor. https://paste.ubuntu.com/p/v6gwKJQPfc/
 But all my laptops work fine (except in Wayland mode under Neon Dev unstable - but I somewhat expect strange issues with NDU)
 @DarinMiller, Ok Darin, thanks! I'll check this in my testing partition, thanks!
[19:18] <jwednesday> I'm guessing I have to file a bug report
 Check out this reference:  https://wiki.archlinux.org/index.php/Dell_Inspiron_N5010#Touchpad
 looks like you need to install the following to use it: https://wiki.archlinux.org/index.php/Dell_Inspiron_N5010#Touchpad
[20:46] <omerbustun> hello
[21:28] <hrv> anyone ? soft for rooting mobile
[21:54] <ville_> kubuntu rules!
[21:54] <ville_> kubuntu rules!
 preachin' to the choir... :)
[21:54] <ville_> Hi, bot
 ircbot is an IRC bridge to telegram....
[22:49] <thomas> hey
[22:50] <Guest57664> hi'
[23:11] <ville_> Hi!
 I have installed amdgpu drivers, and the repo points to a local folder. Any way I can update without having to reinstall the whole thing?