[00:33] <ubptgbot> <LostVX> Hi from ubports gsi anbox
[00:46] <ubptgbot> <Hannah122> @LostVX [Hi from ubports gsi anbox], Teleports: *exists*
[00:47] <ubptgbot> <mrcyjanek> @LostVX [Hi from ubports gsi anbox], Tell me more
[00:50] <ubptgbot> <LostVX> @Hannah122 [Teleports: *exists*], Yea but its not sending sms
[00:53] <ubptgbot> <Condoulo> So I can't seem to get mic permissions working correctly in the browser.
[00:58] <ubptgbot> <LostVX> How can i copy files to anbox
[01:58] <ubptgbot> <anibyl> Via adb I guess
[02:18] <ubptgbot> <mateosalta> @Condoulo [So I can't seem to get mic permissions working correctly in the browser.], on pine devices the trust prompts aren't implemented for wayland yet
[02:45] <ubptgbot> <Christopher> now the ubports install on the pinephone here says that t storage device is full and needs to be formatted...
[02:46] <ubptgbot> <Christopher> is there a recommended way to resize partitions on the emmc to fill the remaining unused space?
[03:48] <ubptgbot> <Javacookies> it's highly recommended to use bmaptool for flashing UT. I believe that one already resized the partitions depending on the storage size
[03:55] <ubptgbot> psychedup74 was added by: psychedup74
=== JanC is now known as Guest37942
=== JanC_ is now known as JanC
[06:34] <ubptgbot> <VerenaFrey> @Javacookies [I think the best way to really test it is to leave it out in the open for at lea …], Thanks for insisting 😀. This morning, I sat in the back yard for 20 minutes and it finally found the position. Apparently, while driving yesterday, we were moving too fast. The trick seems to be to leave it unmoving for a longer time out
[06:34] <ubptgbot> side...
[06:42] <ubptgbot> <Javacookies> yeah, after the initial fix, it usually works fine. Sadly we don't have agps yet so it takes time to get locations
[07:45] <ubptgbot> <Javacookies> hmmm, apparently my issue with teleports is specific to my account. I get the same issue on my pinephone and xperia x. No chat loads
[09:46] <ubptgbot> MigPer was added by: MigPer
[09:54] <ubptgbot> <joeth> @Hannah122 [Teleports: *exists*], why are all your messages in bold?
[10:00] <ubptgbot> <Mokmeister> @Steve Kueffer [https://www.indiegogo.com/projects/volla-phone-free-your-mind-protect-your-priva …], Decent phone too.
[10:01] <ubptgbot> <Mokmeister> The Binary Times talks with Florian Leeber about all things Ubuntu Touch in their latest episode. You can find it here: https://www.thebinarytimes.net/series8.php#s08e06
[10:04] <ubptgbot> <Hannah122> @joeth [why are all your messages in bold?], Old iOS
[10:05] <ubptgbot> <joeth> @Hannah122 [Old iOS], weird that it does that lol
[10:05] <ubptgbot> <Hannah122> @joeth [weird that it does that lol], Idk why
[10:05] <ubptgbot> <ItsMeShouko> Can anyone please tell how to get a port listed here > https://devices.ubuntu-touch.io/
[11:49] <ubptgbot> <dtarrant> @Mokmeister [The Binary Times talks with Florian Leeber about all things Ubuntu Touch in thei …], @flohack I've just been listening to Florian on the Binary Times Audiocast and it's brilliant! Flo takes his time to give an in-depth explanation of the how and the why of UT. … Essential listening!!! …  Well done Florian.
[11:52] <ubptgbot> <dtarrant> https://www.thebinarytimes.net/series8.php#s08e06
[12:13] <ubptgbot> <Flohack> @dtarrant [@flohack I've just been listening to Florian on the Binary Times Audiocast and i …], Thx!
[12:13] <ubptgbot> <ItsMeShouko> @ItsMeShouko [Can anyone please tell how to get a port listed here > https://devices.ubuntu-to …], @Flohack
[12:13] <ubptgbot> <ItsMeShouko> sorry for tag
[12:15] <ubptgbot> Heather Duze was added by: Heather Duze
[12:46] <ubptgbot> <Mokmeister> @dtarrant [@flohack I've just been listening to Florian on the Binary Times Audiocast and i …], Yes indeed, he was a great guest to have on the show. Thanks @Flohack !
[13:09] <ubptgbot> EMax1999 was added by: EMax1999
[13:12] <ubptgbot> <Heather Duze> (Photo, 595x948) https://irc.ubports.com/00pfENia.png I am astounded! … 👍
[13:22] <ubptgbot> 华 江 was added by: 华 江
[14:16] <ubptgbot> king bud was added by: king bud
[14:27] <ubptgbot> <Flohack> @ItsMeShouko [@Flohack], Make a PR against https://gitlab.com/ubports/infrastructure/devices.ubuntu-touch.io
[14:33] <ubptgbot> Mike Vasquez was added by: Mike Vasquez
[14:55] <ubptgbot> Bismark was added by: Bismark
[14:58] <ubptgbot> <Bismark> can anyone tell me if i install ubuntu touth on my phone (android) would i lose his files?
[15:00] <ubptgbot> <mimecar> @Bismark [can anyone tell me if i install ubuntu touth on my phone (android) would i lose …], You should backup your data
[15:00] <ubptgbot> <mimecar> You will have data that you cannot open in Ubuntu Touch.
[15:00] <ubptgbot> <Fuseteam> @mrcyjanek [21:9], Ah hmm i think i know where it can be handled, i'll pm ya in a bit
[15:02] <ubptgbot> <Fuseteam> @YougoChats [i give up😒 even tweaking the .desktop by hand does nothing.], Can i take a look?
[15:03] <ubptgbot> <Bismark> @mimecar [You will have data that you cannot open in Ubuntu Touch.], thanks, i will backup before installing ubuntu touth.
[15:04] <ubptgbot> <mimecar> Is compatible your phone?
[15:04] <ubptgbot> <Bismark> i'm looking about it right now
[15:04] <ubptgbot> <Bismark> my phone is a samsung galaxyOn7
[15:05] <ubptgbot> <mimecar> I don't know if that phone is compatible
[15:06] <ubptgbot> <Bismark> I think it is not compatible :( sad
[15:07] <ubptgbot> <Fuseteam> If its not "compatible" it just means you would need to "port" it
[15:08] <ubptgbot> <Fuseteam> If your interested you can start by reading the requirements at docs.halium.org
[15:09] <ubptgbot> <Bismark> ok, i will read, thanks
[15:13] <ubptgbot> DiegoGuzman was added by: DiegoGuzman
[15:18] <ubptgbot> <mrcyjanek> @Fuseteam [Ah hmm i think i know where it can be handled, i'll pm ya in a bit], Okay!
[15:42] <ubptgbot> <Paul> A prog I have installed (on a fresh install on a nexus 5) requires the libatomic library - trying an apt install says it cant locate the package. Elsewhere I read they touch doesnt support apt's - am I doing the wrong thing?
[15:42] <ubptgbot> <mimecar> You can't use apt
[15:43] <ubptgbot> <mimecar> APT only works inside a container (Libertine)
[15:44] <ubptgbot> <Fuseteam> You'll need to make a click package of the prog and have that ship with libatomic
[16:00] <ubptgbot> <mateosalta> @Javacookies [hmmm, apparently my issue with teleports is specific to my account. I get the sa …], Mine isn't loading on the ut phones either
[16:08] <ubptgbot> <Javacookies> @mateosalta [Mine isn't loading on the ut phones either], in all your UT devices could it be tdlib issue or teleports Checking the log just shows opening chat with no errors
[16:09] <ubptgbot> <mateosalta> like it 'opens' but not displaying
[16:10] <ubptgbot> <Paul> @Fuseteam [You'll need to make a click package of the prog and have that ship with libatomi …], It isnt my software (it is open source, but I have just installed the binary)... is there an alternative way of me installing the library?
[16:11] <ubptgbot> <mateosalta> It can be included within the click
[16:17] <ubptgbot> <mateosalta> @Javacookies [in all your UT devices could it be tdlib issue or teleports Checking the log jus …], https://gitlab.com/ubports/apps/teleports/-/issues/211 looks like the same log for me here
[16:17] <ubptgbot> <YougoChats> @Fuseteam [Can i take a look?], Pm'd you
[17:52] <ubptgbot> dohniks was added by: dohniks
[18:13] <ubptgbot> <Paul> @mateosalta [It can be included within the click], If this was addressed to me, I am not really a un*x person, and wouldn't know where to start with a click package... I'll bounce it off the author and they'll either sort it, or I'll use a different application. Cheers!
[18:17] <ubptgbot> <Paul> I am looking at old mobiles running ubuntu touch for a crypto wallet/privacy application. Has anyone got any pointers to articles on Fido/NFC usage on this platform? I like the Fido device idea, but it doesn't really seem to have caught on.
[18:19] <ubptgbot> <dohbee> @Paul [I am looking at old mobiles running ubuntu touch for a crypto wallet/privacy app …], There is no NFC support yet in UT
[18:32] <ubptgbot> <mateosalta> @Paul [If this was addressed to me, I am not really a un*x person, and wouldn't know wh …], You just put it in a folder with the arch name inside the package, then you can use it like normal, the clickable 'precompiled' build option
[19:18] <ubptgbot> Slimmilan was added by: Slimmilan
[19:32] <ubptgbot> SangBoedjang was added by: SangBoedjang
[20:07] <ubptgbot> QuadFeed was added by: QuadFeed
[20:23] <ubptgbot> <Paul> @mateosalta [You just put it in a folder with the arch name inside the package, then you can …], I appreciate your efforts - but as I have just installed this on a new device for the first time, for me there is no 'use it like normal', I know what a folder is, but not what you mean by 'arch name' or 'inside the package' or the 'clickable' bu
[20:23] <ubptgbot> ild option. I can guess that I need to type something in to some file, put  the file  in a folder, make it some kind of 'package' of it then run something that lets me install it which has a button for 'install precompiled'... Do you have a link to something that covers all of this - even a 101?
[20:24] <ubptgbot> <Paul> @dohbee [There is no NFC support yet in UT], Cheers,. that has probably saved several days searching! :)  - the fido dongles usually do USB and some do WiFi - do you know if UT supports any Fido?
[20:25] <ubptgbot> <mateosalta> oh, ok. I think I assumed too much when you said you installed the binary
[20:25] <ubptgbot> <mateosalta> https://clickable-ut.dev/en/latest/
[20:26] <ubptgbot> <mateosalta> so, with clickable you can make the packages that ut uses
[20:26] <ubptgbot> <dohbee> @Paul [Cheers,. that has probably saved several days searching! :)  - the fido dongles …], i guess for devices that have OTG support, it should theoretically work, but maybe there is something missing in the browser to use it
[20:28] <ubptgbot> <Paul> @mateosalta [oh, ok. I think I assumed too much when you said you installed the binary], Cheers - I'll check it out.  I 'installed by binary' by down loading it, decompressing it and copying it in to the bin directory :)
[20:29] <ubptgbot> <mateosalta> ah, is this a terminal tool?
[21:12] <ubptgbot> <Fuseteam> @Paul [It isnt my software (it is open source, but I have just installed the binary)... …], If its is open source it should be fairly feasisle to create a click file
[21:16] <ubptgbot> <Fuseteam> You can look at the clickable docs, gitlab has all the tools you need to "just" build the click package
[21:16] <ubptgbot> <Fuseteam> What tool is it btw?
[21:50] <ubptgbot> JCAS0 was added by: JCAS0
[23:46] <ubptgbot> <Paul> @mateosalta [ah, is this a terminal tool?], It is a personal webserver platform - https://sitejs.org/
[23:52] <ubptgbot> <Paul> @Fuseteam [If its is open source it should be fairly feasisle to create a click file], A personal webserver https://sitejs.org/ it looks pretty sleek, with lots of privacy/security ethos (just like UT). I am looking at it to deliver local react based apps (privacy/security related).
[23:52] <ubptgbot> <mateosalta> sounds cool
[23:55] <ubptgbot> <Paul> @mateosalta [sounds cool], I think so too... so am trying to do some stuff with it in the hope that it really is! :)