[00:05] well, that did not worl either. [00:06] try the latest beta as per bug report, at the bottom [00:06] Then i reverted to 0.4.14-beta [00:07] that seemed to work t first, but I got an erroer just at end of the install. now I have a constant boot-loop [00:07] i'll give the latest beta a try [00:16] I cant even turn it off.... its constantly reebooting [00:25] ok, found a way to power off [00:25] you have to be fast enough [00:29] April Rodriguez was added by: April Rodriguez [00:53] fails [01:11] fan zhaohui was added by: fan zhaohui [01:17] @NyamkaTg [], I think your screen is broken [01:21] @NyamkaTg [], which device is this? it doesn't look like any I know [02:50] <⁢⁢⁢⁢⁢ ⁢⁢⁢⁢⁢ ⁢⁢⁢⁢⁢ ⁢⁢⁢⁢⁢ ⁢⁢⁢⁢⁢> Hello, … I just noticed that ( ubports installer ) doesn't flash the recovery-bacon as it should. good evening ++ [03:38] @Javacookies [Haven't seen it myself but if it does work, you'll be delighted to see it and pr …], Not good.. … Rotation not working (on phone) … Bluetooth mouse not working (on convergence) [03:38] (Photo, 1280x960) https://irc.ubports.com/6yo29JVx.png [03:38] (Photo, 1280x960) https://irc.ubports.com/HoyWg0Eo.png [03:39] Touch pad with phone is not working too, but it's also not working on stable channel. [03:54] wow well I know you said its not good but it actually looks really cool [03:54] once the mouse is going that will be awesome [03:55] I like the bigger icon size used [03:58] (Photo, 1280x960) https://irc.ubports.com/00IoJr02.png Rc channel [04:01] I do this with my note 4, its actually pretty nice [04:03] @Christopher [I like the bigger icon size used], I see the bigger icon when I use my monitor (the one that flicker). I'm not sure it's intended or not.. Seems to big for me [04:05] @dokie80 [I see the bigger icon when I use my monitor (the one that flicker). I'm not sure …], also with convergence, the icons should be at the top if your wired into the screen, one sec while I find the pic [04:07] @dokie80 [], U mean like this? [04:10] Why edge version is lower than rc? [04:10] @dokie80 [U mean like this?], yeah, exactly like that lol [04:10] @Shakendo [yeah, exactly like that lol], That's on stable [04:10] Stable channel [04:11] my note 4 is devel, edge is where the potential to break everything is very real (and not available on my note 4) Id reccomend devel or rc unless you absolutely need your device to work, then use stable lol [04:13] I was commanded to try edge 😜 [04:14] He said that if it break my n5, he will buy me a new one 🤣 [04:22] Devel looks okay. Video streaming is working while before Its not working on stable. [04:32] @dokie80 [He said that if it break my n5, he will buy me a new one 🤣], n5 as in nexus 5? I have one of those as well, but no slimport adapter for it sadly. in total I have 4 devices that run UT atm, Im looking into porting a tablet, and a couple more phones, but my life has been getting busy as of late [04:35] yes nexus 5 [04:45] @TotalSonic [No, there is not, but there is a real need for a developer to tackle the major t …], Can you please share addition details?link may be?Do you mean amazon redshift? [04:45] great device, I wish it had a bigger screen though, but otherwise really good when you know what to look for in terms of common issues [05:13] @Sanath [Can you please share addition details?link may be?Do you mean amazon redshift?], I think he meant night light [05:18] Flux kinda app? [05:19] Kevin was added by: Kevin [05:20] Display a listing of all the files in the current working directory ending with letter ‘t’ using one command, e.g. unix.txt or doodad.text. … does someone know which command to use for this... [05:20] I am so confused [05:23] ls *t … ? [05:35] thank you :) [05:36] Yw [05:51] 😌 [06:19] @fredldotme [That 0x error has been reported before: https://github.com/ubports/ubports-insta …], 0x error can be fixex by specifying type:raw or so in the installer config. Jan is on it, but it will take some time. For now all affected devices need the installer config to be changed [08:07] ok, my device (suzu) is either off or stuck in this 5-10sec boot-loop. It comes up until reaching the bootloarder screen with options: " ubuntu options", "Android options", "Advanced" and then restarts. [08:09] This bootloop starts as soon as I connect in fastboot mode. Therefore flashing firmware is almost impossible. Now, Is it safe to install the ASOP Image via fastboot? [08:09] Does Someone here live in Canada [08:24] Hi guys! Does anybody know how to run apache2/nginx? I’m trying to install with Libertine, but there’s installation errors… [08:41] Kanceza was added by: Kanceza [08:44] Hello … Can you share the Oneplus 5 halium boot img file? [08:55] How stable is ubuntu touch for oneplus 3t [08:56] Also where can i get oneplus one if possible now [09:23] ok, the issue is, the device stays several seconds in the bootloader and then reboots. I am not able to stop it. So, if the Ubports-Installer starts flashing - the device reboots and connection is lost. [09:23] this is really frustrating [09:46] @Max [Hi guys! Does anybody know how to run apache2/nginx? I’m trying to install with …], I don't know if you'll be able to allocate the ports to inside the container, because as far as I know the container runs as your user and the default user doesn't have permission to open port 80 or 443 [09:46] Unless you use a higher port like 8080 [09:57] MZGDev was added by: MZGDev [10:27] @dokie80 [Not good.. … Rotation not working (on phone) … Bluetooth mouse not working (on conv …], yeah edge has many things that might not work 😅 Edge channel is like a lab rat 😄 [10:28] you did not notice anything on the phone screen while connected to the monitor? Multi-display and workspace suppprt landed on the edge 😉 [10:32] @Javacookies [you did not notice anything on the phone screen while connected to the monitor? …], nope, on phone is like usual, touchpad that didnt work 😁 [10:33] fyi, i just switch channel... not re-installing [10:41] Guys m the Open store is not opening on my phone [10:41] Meizu Pro 5 [10:41] for some time now and my 2FA is not working [10:41] any idea how to fix this [10:42] @dokie80 [nope, on phone is like usual, touchpad that didnt work 😁], The touchpad was fixed some OTAs ago but it seems that it got broken again [10:56] @dokie80 [], You can see the phone here. [11:10] monajemia was added by: monajemia [11:11] well, i managed to install trwp 3.3.1 via fastboot. BUT the installer fails again because of exact same reason as before - the device does not stay in Fast-boot mode during file-transfer. It reboots suddenly during file transfer. [11:11] after that, twrp is gone and boot-loop is back [11:12] NOW, i have reverted to TWRP again and leave it like ta [11:12] that, at least i can switch it on/off reliably [11:12] @CW [well, i managed to install trwp 3.3.1 via fastboot. BUT the installer fails agai …], you use adb sideload? [11:14] i have seen this button in TWRP, but what for should I use it? [11:14] please give me a hint [11:14] adb sideload is when you stream the installation zip from pc onto phone and it installs on the go [11:15] So if not, you copy the installer some where and install from zip, right? [11:15] @CW [well, i managed to install trwp 3.3.1 via fastboot. BUT the installer fails agai …], I was confused by "file-transfer" [11:16] Also what's your phone? [11:17] Xperia? [11:17] aha. I see there is a misounderstanding. Refering to my previous posts, i have posted quite an elaborate log about what I did and at what point it fails. [11:17] Yes its suzu, and I was using the ubports-installer running on Xubuntu 18.04 [11:19] The Image was downloaded by the installer and at the point where the System Image ist transferred to the phone (by the ubports-installer via fastboot) the phone leaves fastboot-mode (LED turns RED, instead keeping blue color) and finally reboots. [11:19] Is your phone unlocked? [11:19] the ubports-installer reports connection-loss (obviously 😉) [11:19] YES [11:20] Have you gone through https://devices.ubuntu-touch.io/device/suzu/? [11:20] [Edit] Have you gone through https://devices.ubuntu-touch.io/device/suzu/ ? [11:20] I gat a warning screen at boot [11:20] exactly [11:20] each and every step [11:20] and succeded [11:21] problems came afterwards, when trying to install vie ubports-installer 0.4.20-beta and running into a known bug: https://github.com/ubports/ubports-installer/issues/1377 [11:22] @CW [problems came afterwards, when trying to install vie ubports-installer 0.4.20-be …], And then you tried installing manually using TWRP? [11:23] no, then I was stuck in a bootloop [11:23] and went to bed. [11:24] this morning I tried to solve it but wasnt able. So TWRP is just a different try to get control over the phone back. [11:24] Target ist to get Ubports running. TWRP is just an intermediate step [11:25] Yeah, how do you boot into twrp? [11:25] via fastboot flash boot *.img [11:26] well its the curernt bootloader, so its the only thong that loads [11:26] TWRP tells me there are actually 4551MB in system partition [11:26] what android version did your phone have when you bought it? [11:26] maybe I should wipe it [11:27] It had 6.0 and i updated it to 8.0 [11:27] took a hole day and 7 to 8 inceremental updates [11:27] @CW [TWRP tells me there are actually 4551MB in system partition], boot loops are often because of boot.img being corrupted, in your case it may be system [11:28] what method did you use for flashing stock firmware? [11:29] i let it do the updates by itself, so android updated itself [11:30] so after you got stuck on boot, you didn't try flashing stock? [11:30] no [11:31] I was reluctant to download the 2.7GB which take quite some time in this remote place of Germany [11:31] ^ [11:32] well that is the way that almost always works, I don't know which partition is corrupted, the easiest fix is to revert back to stock and start from there [11:32] Ok, i can do that. [11:33] and try the flashtool provided for xperia [11:33] flash the firmware using that [11:33] ok, I'll give it a try [11:33] fastboot is impossible? [11:35] the flashtool actually uses fastboot I think [11:36] it's just that your boot and system partition may be corrupted in several ways [11:36] ok I'll figure it out [11:37] haven't installe the xperia flashtool yet. Maybe I have to update my JRE [12:23] Mf Mm was added by: Mf Mm [12:55] @Hungry_BB [any idea how to fix this], Your clock is wrong. Fix the time/date to be correct [13:00] Thank you , sir ! That was the problem [13:23] T-Bag was added by: T-Bag [13:25]

please what is the passphrase for ubuntu touch? [13:26] @T-Bag [please what is the passphrase for ubuntu touch?], phablet [13:26]

thanks [14:12] I have an emergency situation [14:12] would it possible to install and run node.js on ubtuch? [14:12] [Edit] would it possible to install and run node.js on ubtouch? [14:13] libertine? [14:13] I'd need persistense [14:14] [Edit] I'd need persistence [14:37] set rootfs to read write? [14:38] Anyone else having issues to start apps after updating to OTA-13? I am on a Xperia X, and can't start any app anymore (both on devel and stable). Messages in `.cache/upstart/*.log say "Unable to exec 'teleports' in '/opt/click.ubuntu.com/.click/users/phablet/teleports.ubports': No such file or directory" [14:39] [Edit] Anyone else having issues to start apps after updating to OTA-13? I am on a Xperia X, and can't start any app anymore (both on devel and stable). Messages in `.cache/upstart/*.log say for example "Unable to exec 'teleports' in '/opt/click.ubuntu.com/.click/users/phablet/teleports.ubports': No such file or directory" Are all apps re [14:39] moved? Should I reinstall them via Settings->Update? [14:48] @Mattias [Anyone else having issues to start apps after updating to OTA-13? I am on a Xper …], it's now arm64 so most apps won't work … go to Update settings > reinstall all apps [14:49] not all apps may be reinstalled so you have to check each app and reinstall manually from the store [15:03] @Shakendo [I do this with my note 4, its actually pretty nice], You mean UT on the Samsung galaxy Note 4? That's what i am just typing on and had no idea it could run UT. Could i ask you to point me in the right direction on what/where to read to get started? [15:04] well are you using a snapdragon or exynos variant? I have only got the snapdragon variant so far since I dont own a exynos one [15:07] @Javacookies [it's now arm64 so most apps won't work … go to Update settings > reinstall all app …], Thanks! 👍 That worked for most apps :) I guess I somehow missed that all apps needed to be reinstalled. Too bad the config of Dekko is not restored, but he, most things work again. 😁 [15:08] @X YZ [You mean UT on the Samsung galaxy Note 4? That's what i am just typing on and ha …], I have some older builds that are twrp flashable, but they lack OTA, and I just recently found out that the installer currently will only be able to install to my variant, so Ive been trying to fix that (with limited success) [15:10] @Shakendo [well are you using a snapdragon or exynos variant? I have only got the snapdrago …], It's the SM N910F - have to find out more later when i am back home. 📱🤔 [15:11] @X YZ [It's the SM N910F - have to find out more later when i am back home. 📱🤔], I have UT running on 910F (trltexx) [15:11] Don't even have twrp on it yet and did not know it was available. [15:11] my note 4 is a 910V, but all the snapdragon ones use the same base [15:11] @Shakendo [I have UT running on 910F (trltexx)], Sounds promising. 👍 [15:12] @X YZ [Don't even have twrp on it yet and did not know it was available.], the ubports recovery will eventually replace twrp, at least for UT, I gotta fix a variance I didnt know existed until recently [15:15] I see i will have some reading to do. 😉 … Offline for a few hours now, though. … But thanks already for giving me hope for my nice little Note 4. 😀👍 [15:19] @Mattias [Thanks! 👍 That worked for most apps :) I guess I somehow missed that all apps n …], Yeah I think it should have been pointed out in the OTA 13 posts. Anyway, app data shouldn't be affected and should work as is [15:19] @Shakendo [I have some older builds that are twrp flashable, but they lack OTA, and I just …], Is their no option for multiple codenames? [15:21] a unified build? there is, but Im having trouble getting it to work, and it requires system.img to be mounted r/w which isnt really plausible with UT, it can be run in recovery, but after asking and researching theres no way to have it automatically run after the install [15:22] I have 3 builds that I based from the unified build info [15:22] @X YZ [I see i will have some reading to do. 😉 … Offline for a few hours now, though. … Bu …], welcome, just let me know if you wanna try one of the twrp builds [15:43] Tell me, is there an application for reading books in fb2 format? [16:07] Sturm Reader is the one I hear people use. [16:10] @pv_bl [Sturm Reader is the one I hear people use.], Not read fb2 :( [16:12] Don't know, then. Maybe we just don't have one. [16:37] @Sanath [Can you please share addition details?link may be?Do you mean amazon redshift?], probably the open source `redshift` package - http://jonls.dk/redshift/ - or the Gnome project's `Night Light`would be good pre-existing code base to build on for an OS wide PR, or perhaps port to clickable, for use in UT [16:38] @Sanath [Can you please share addition details?link may be?Do you mean amazon redshift?], [Edit] probably the open source `redshift` package - http://jonls.dk/redshift/ - or the Gnome project's `Night Light` would be good pre-existing code base to build on for an OS wide PR, or perhaps port to clickable, for use in UT [16:42] @TotalSonic [probably the open source redshift package - http://jonls.dk/redshift/ - or the G …], afaik, redshift doesn't support mir or wayland, nor android. there are different ways to filter out blue light across different devices, and we want to use the most efficient method for each device possible, ideally [16:48] @dohbee [afaik, redshift doesn't support mir or wayland, nor android. there are different …], makes sense, thanks for the info [17:17] @Verevka86 [Not read fb2 :(], You could try using an (online) tool to convert it to PDF or some other format. [18:08] @Verevka86 [Not read fb2 :(], maybe `fbreader` in a Libertine container could work. I will test later today. [18:10] @TotalSonic [maybe fbreader in a Libertine container could work. I will test later today.], I would be very grateful, I am not yet familiar with libertine, while I ran it through anbox, but I figured out the device memory 😔 [18:12] @Verevka86 [I would be very grateful, I am not yet familiar with libertine, while I ran it t …], lots of online and offline tools (such as Calibre) can convert fb2 to epub as well - https://duckduckgo.com/?q=convert+fb2+to+epub&t=brave&ia=web [18:24] (Photo, 1080x1920) https://irc.ubports.com/4d4Kr8M7.png [18:24] @TotalSonic [lots of online and offline tools (such as Calibre) can convert fb2 to epub as we …], Anbox work :) [18:28] coelicidium was added by: coelicidium [18:40]

does ubuntu touch support android apps? [18:42] kinda sorta [18:42] Not really [18:43] Its more like, things exist to make running android apps easier and Marius has worked on it, but if things go wrong you're on your own [20:12] cant say ive ever tested anbox on ubports... there was a n anbox build for sailfish OS (for devices that didnt have an official alien dalvik support) and it worked well though [21:17] @PiecerEdd [cant say ive ever tested anbox on ubports... there was a n anbox build for sailf …], yeah, I have yet to try Anbox myself as well, even after being on UT for my daily driver for 2 years now - but luckily for my needs I can get by well on just what is available for UBports natively and via webapp, as well as a few things via [21:17] Libertine. I do hope that anbox can be made to function much more stably and with decent power management - as there are a couple of Android apps (such as Lyft and Simpletask) that it would be nice to have access to again. [21:40] @Shakendo [welcome, just let me know if you wanna try one of the twrp builds], Thanks, i would love to. Right now, though, the Note 4 is my dd under Android with a few apps that i am not sure i can replace under ut at once. Also it is vendor branded and boot-locked, i think. Never given that much thought, since i have never seen any OS for i [21:40] t other than Android. So I will first have to migrate my "must have"-apps to another Android-phone (los or de-googled), before i can try anything on the Note 4. … Would like to contact you again once i have finished these preparations. 😀 [22:26] Kian Decker was added by: Kian Decker [22:33] (Photo, 768x1280) https://irc.ubports.com/HRusH006.png [23:02] @X YZ [Thanks, i would love to. Right now, though, the Note 4 is my dd under Android wi …], no worries, it should be showing up in the installer soon [23:23] (Photo, 958x960) https://irc.ubports.com/MWvlfyS8.png [23:53] @UniversalSuperBox SPAM