OvenWerks | Eickmeyer[m]: re, https://bugs.launchpad.net/ubuntu/+source/studio-controls/+bug/1898369 | 00:17 |
---|---|---|
ubottu | Launchpad bug 1898369 in studio-controls (Ubuntu) "studio-controls autoconnects the wrong ports" [Medium,Triaged] | 00:17 |
Eickmeyer[m] | OvenWerks: ? | 00:18 |
OvenWerks | I have looked at the code a few times and can not figure that out I can't figure out what would affect ebtry and not others | 00:18 |
Eickmeyer[m] | So then, what is our answer? Cannot duplicate? | 00:18 |
OvenWerks | I don't have three (four?) USB devices to play with | 00:19 |
OvenWerks | (well I do, but they all show as the same device name) | 00:19 |
Eickmeyer[m] | Yeah. Then cannot duplicate, unfortunately. I tried with my own hardware (USB headset and USB interface) and can't duplicate. | 00:20 |
OvenWerks | The affected bridge is not the first or last nor do both midle bridges have the same problem | 00:20 |
OvenWerks | Eickmeyer[m]: I think as part of my next set of development, I will save any changes to the config file even without apply and send the signal only on apply | 00:22 |
Eickmeyer[m] | That would definitely be more foolproof. | 00:23 |
OvenWerks | Eickmeyer[m]: is there any way to add to the files sent in with a bug report? | 00:24 |
Eickmeyer[m] | Sure. Simply a new comment with an attachment. I was about to close the bug, but do you want to ask the reporter for more? | 00:24 |
OvenWerks | I am right now | 00:25 |
Eickmeyer[m] | Ok, cool. Mark the bug as incomplete too. That gives 60 days to respond. | 00:25 |
OvenWerks | ya but I was wondering if the ubuntu-bug had some sort of config somewhere that allowed other files to be sent. | 00:26 |
Eickmeyer[m] | Nope. If we want additional logs attached, we have to ask manually. :/ | 00:28 |
OvenWerks | Eickmeyer[m]: I have managed to get the blank dropdown... | 00:47 |
OvenWerks | It may have something to do with a mono input | 00:47 |
OvenWerks | but it does save it correctly | 00:48 |
Eickmeyer[m] | Interesting. Any way to fix? | 00:52 |
OvenWerks | can you test for me... I can't seem to select the last port | 00:59 |
OvenWerks | actually I was able to and it worked and then I just looked at it and the second to last was missing and so I reset it and then I looked at the last one and it changed to the second last. | 01:00 |
OvenWerks | Anyway. I think there is a problem all right. | 01:00 |
OvenWerks | It does not matter if they are USB or not (I think) | 01:01 |
Eickmeyer[m] | So, the issue occurs with mono, right? | 01:01 |
OvenWerks | I don't know if it is the mono part or not... I will try some more :) | 01:01 |
Eickmeyer[m] | Ok, cool. I'm not in a position to test right now, sadly. | 01:02 |
OvenWerks | mono device affects things for sure | 01:04 |
OvenWerks | if I have stereo, mono, stereo, stereo I can choose any but the third one. | 01:04 |
OvenWerks | The third one becomes the second one. | 01:05 |
Eickmeyer[m] | Ok, I can see a usability issue with that. | 01:06 |
OvenWerks | I don't have any mono out devices but I would imagine the problem is there too | 01:06 |
Eickmeyer[m] | Yeah, I don't either. I have one mono in device. | 01:07 |
OvenWerks | I know where to look anyway. | 01:07 |
OvenWerks | The code is the same in both cases | 01:07 |
OvenWerks | The pulse bridges have always been a way of getting desktop out to jack outs for me... | 01:08 |
Eickmeyer[m] | Yeah, same here. | 01:08 |
OvenWerks | What bothers me is that it did work the first time... | 01:17 |
OvenWerks | Eickmeyer[m]: I have attached a patched version of controls to the bug and asked th euser to try that. | 04:18 |
Eickmeyer[m] | OvenWerks: Sounds good. If the patch works, are we looking at 2.0.9? | 04:18 |
OvenWerks | yes | 04:20 |
OvenWerks | It does seem to correct things here | 04:20 |
OvenWerks | I am just doing the changelog so everything will be ready | 04:21 |
Eickmeyer[m] | Sounds like a plan. I'll watch the bug report, but say the word and we'll get it in. | 04:26 |
OvenWerks | I have in mind to wait <some amount of time> for a response on that bug and then release anyway. I was hoping for a confirm first so if there is still a problem it could all be one release. | 16:04 |
OvenWerks | Eickmeyer[m]: how long should <some amount of time> be? | 16:04 |
Eickmeyer[m] | OvenWerks: The standard is 60 days. | 16:04 |
OvenWerks | Anyway, I will push the fix later today but not tag | 16:05 |
OvenWerks | sounds like a long time. | 16:05 |
Eickmeyer[m] | But, you can do what you want. We are in a bit of a time crunch though with Final Freeze on the horizon. | 16:05 |
OvenWerks | so I will push the commit in the afternoon and you can tag if you need to get in. | 16:06 |
Eickmeyer[m] | Sounds good. | 16:06 |
OvenWerks | There was definately a wrong variable referenced when the device is mono. | 16:07 |
Eickmeyer[m] | So, there was definitely a bug, the question is if this fixes his issue. | 16:07 |
OvenWerks | right | 16:08 |
Eickmeyer[m] | But, yeah, I think 24 hours is more than enough time to verify a bug fix, but if you feel as though it should fix the bug, we can do that. If it doesn't fix the bug, we can always reopen the bug. | 16:08 |
OvenWerks | I have to change this code anyway as I allow more than 2 channel bridges some people have requested | 16:09 |
OvenWerks | (part of 2.1.0 | 16:09 |
Eickmeyer[m] | Oh, cool! | 16:09 |
OvenWerks | I have already changes the GUI and added the extra parameter to the config set/file, I just have to make it do something. | 16:11 |
OvenWerks | I think I will change the extra devices tab to be similar to the pulse bridges tab. | 16:11 |
OvenWerks | there will be a drop down that lists devices with the screen applying only to the currently selected device. | 16:12 |
Eickmeyer[m] | Oh good! As long as it's a UX improvement, I'm all for it. :) | 16:16 |
OvenWerks | I may add another tab for session manager stuff. So I can allow turning auto connect off. | 16:16 |
OvenWerks | not just UX improvemnt but also allow for setting extra parameters per device. | 16:17 |
MauroGaspari[m] | quick question about Carla. Do you guys know if there is any change in latest versions, or planned, so that Carla can be set to start minimized? I have not found anything to do that, so I used a script to launch it, then minimize it. Would be amazing if there could be a tick somewhere in the settings to do that. | 16:18 |
OvenWerks | carla 2.2 is the latest out. I do not know if such a feature is included | 16:20 |
OvenWerks | there are a number of changesin there and at least one change we had to comment out for now because of a jack bug | 16:21 |
OvenWerks | maybe ask falktx on #kxstudio | 16:22 |
OvenWerks | Also, I think some DEs allow setting applications to start minimized | 16:22 |
OvenWerks | there is already a lot of work for Carla.next in the pipeline. | 16:23 |
MauroGaspari[m] | Thanks, yes some do, like plasma, but would be super cool to have that little feat so anyone can enjoy it. But I do not want to bother with feature request as people are busy dealing with important features and fixes :) | 16:23 |
MauroGaspari[m] | I am testing my small script so far seems to be working fine on Ubuntu Budgie + Studio tools | 16:24 |
OvenWerks | ubuntustudio 20.10 is plasma based | 16:25 |
OvenWerks | The layout is similar to now though. | 16:25 |
OvenWerks | glad it works. | 16:26 |
Eickmeyer[m] | Mauro Gaspari: I think the developer of Carla likes his feature requests to be at https://github.com/falktx/carla/issues. | 16:29 |
Eickmeyer[m] | OvenWerks: Looks like you just got the go-ahead. | 16:56 |
OvenWerks | Eickmeyer[m]: cool, will deal with it in about 2 hours :) | 19:46 |
Eickmeyer[m] | 👍️ | 19:47 |
OvenWerks | Eickmeyer[m]: Studio-controls 2.0.9 | 21:26 |
OvenWerks | Eickmeyer[m]: new dev started at 2.0.21 for the eventual 2.1.0 | 21:28 |
Eickmeyer[m] | OvenWerks: Ok, working on 2.0.9. | 21:29 |
Generated by irclog2html.py 2.7 by Marius Gedminas - find it at mg.pov.lt!