[00:17] <OvenWerks> Eickmeyer[m]: re, https://bugs.launchpad.net/ubuntu/+source/studio-controls/+bug/1898369
[00:18] <Eickmeyer[m]> OvenWerks: ?
[00:18] <OvenWerks> I have looked at the code a few times and can not figure that out I can't figure out what would  affect ebtry and not others
[00:18] <Eickmeyer[m]> So then, what is our answer? Cannot duplicate?
[00:19] <OvenWerks> I don't have three (four?) USB devices to play with
[00:19] <OvenWerks> (well I do, but they all show as the same device name)
[00:20] <Eickmeyer[m]> Yeah. Then cannot duplicate, unfortunately. I tried with my own hardware (USB headset and USB interface) and can't duplicate.
[00:20] <OvenWerks> The affected bridge is not the first or last nor do both midle bridges have the same problem
[00:22] <OvenWerks> Eickmeyer[m]: I think as part of my next set of development, I will save any changes to the config file even without apply and send the signal only on apply
[00:23] <Eickmeyer[m]> That would definitely be more foolproof.
[00:24] <OvenWerks> Eickmeyer[m]: is there any way to add to the files sent in with a bug report?
[00:24] <Eickmeyer[m]> Sure. Simply a new comment with an attachment. I was about to close the bug, but do you want to ask the reporter for more?
[00:25] <OvenWerks> I am right now
[00:25] <Eickmeyer[m]> Ok, cool. Mark the bug as incomplete too. That gives 60 days to respond.
[00:26] <OvenWerks> ya but I was wondering if the ubuntu-bug had some sort of config somewhere that allowed other files to be sent.
[00:28] <Eickmeyer[m]> Nope. If we want additional logs attached, we have to ask manually. :/
[00:47] <OvenWerks> Eickmeyer[m]: I have managed to get the blank dropdown...
[00:47] <OvenWerks> It may have something to do with a mono input
[00:48] <OvenWerks> but it does save it correctly
[00:52] <Eickmeyer[m]> Interesting. Any way to fix?
[00:59] <OvenWerks> can you test for me... I can't seem to select the last port
[01:00] <OvenWerks> actually I was able to and it worked and then I just looked at it and the second to last was missing and so I reset it and then I looked at the last one and it changed to the second last.
[01:00] <OvenWerks> Anyway. I think there is a problem all right.
[01:01] <OvenWerks> It does not matter if they are USB or not (I think)
[01:01] <Eickmeyer[m]> So, the issue occurs with mono, right?
[01:01] <OvenWerks> I don't know if it is the mono part or not... I will try some more :)
[01:02] <Eickmeyer[m]> Ok, cool. I'm not in a position to test right now, sadly.
[01:04] <OvenWerks> mono device affects things for sure
[01:04] <OvenWerks> if I have stereo, mono, stereo, stereo I can choose any but the third one.
[01:05] <OvenWerks> The third one becomes the second one.
[01:06] <Eickmeyer[m]> Ok, I can see a usability issue with that.
[01:06] <OvenWerks> I don't have any mono out devices but I would imagine the problem is there too
[01:07] <Eickmeyer[m]> Yeah, I don't either. I have one mono in device.
[01:07] <OvenWerks> I know where to look anyway.
[01:07] <OvenWerks> The code is the same in both cases
[01:08] <OvenWerks> The pulse bridges have always been a way of getting desktop out to jack outs for me... 
[01:08] <Eickmeyer[m]> Yeah, same here.
[01:17] <OvenWerks> What bothers me is that it did work the first time... 
[04:18] <OvenWerks> Eickmeyer[m]: I have attached a patched version of controls to the bug and asked th euser to try that.
[04:18] <Eickmeyer[m]> OvenWerks: Sounds good. If the patch works, are we looking at 2.0.9?
[04:20] <OvenWerks> yes
[04:20] <OvenWerks> It does seem to correct things here
[04:21] <OvenWerks> I am just doing the changelog so everything will be ready
[04:26] <Eickmeyer[m]> Sounds like a plan. I'll watch the bug report, but say the word and we'll get it in.
[16:04] <OvenWerks> I have in mind to wait <some amount of time> for a response on that bug and then release anyway. I was hoping for a confirm first so if there is still a problem it could all be one release.
[16:04] <OvenWerks> Eickmeyer[m]: how long should <some amount of time> be?
[16:04] <Eickmeyer[m]> OvenWerks: The standard is 60 days.
[16:05] <OvenWerks> Anyway, I will push the fix later today but not tag
[16:05] <OvenWerks> sounds like a long time.
[16:05] <Eickmeyer[m]> But, you can do what you want. We are in a bit of a time crunch though with Final Freeze on the horizon.
[16:06] <OvenWerks> so I will push the commit in the afternoon and you can tag if you need to get in.
[16:06] <Eickmeyer[m]> Sounds good.
[16:07] <OvenWerks> There was definately a wrong variable referenced when the device is mono.
[16:07] <Eickmeyer[m]> So, there was definitely a bug, the question is if this fixes his issue.
[16:08] <OvenWerks> right
[16:08] <Eickmeyer[m]> But, yeah, I think 24 hours is more than enough time to verify a bug fix, but if you feel as though it should fix the bug, we can do that. If it doesn't fix the bug, we can always reopen the bug.
[16:09] <OvenWerks> I have to change this code anyway as I allow more than 2 channel bridges some people have requested
[16:09] <OvenWerks> (part of 2.1.0
[16:09] <Eickmeyer[m]> Oh, cool!
[16:11] <OvenWerks> I have already changes the GUI and added the extra parameter to the config set/file, I just have to make it do something.
[16:11] <OvenWerks> I think I will change the extra devices tab to be similar to the pulse bridges tab.
[16:12] <OvenWerks> there will be a drop down that lists devices with the screen applying only to the currently selected device.
[16:16] <Eickmeyer[m]> Oh good! As long as it's a UX improvement, I'm all for it. :)
[16:16] <OvenWerks> I may add another tab for session manager stuff. So I can allow turning auto connect off.
[16:17] <OvenWerks> not just UX improvemnt but also allow for setting extra parameters per device.
[16:18] <MauroGaspari[m]> quick question about Carla. Do you guys know if there is any change in latest versions, or planned, so that Carla can be set to start minimized? I have not found anything to do that, so I used a script to launch it, then minimize it. Would be amazing if there could be a tick somewhere in the settings to do that.
[16:20] <OvenWerks> carla 2.2 is the latest out. I do not know if such a feature is included
[16:21] <OvenWerks> there are a number of changesin there and at least one change we had to comment out for now because of a jack bug
[16:22] <OvenWerks> maybe ask falktx on #kxstudio
[16:22] <OvenWerks> Also, I think some DEs allow setting applications to start minimized
[16:23] <OvenWerks> there is already a lot of work for Carla.next in the pipeline.
[16:23] <MauroGaspari[m]> Thanks, yes some do, like plasma, but would be super cool to have that little feat so anyone can enjoy it. But I do not want to bother with feature request as people are busy dealing with important features and fixes :)
[16:24] <MauroGaspari[m]> I am testing my small script so far seems to be working fine on Ubuntu Budgie + Studio tools
[16:25] <OvenWerks> ubuntustudio 20.10 is plasma based
[16:25] <OvenWerks> The layout is similar to now though.
[16:26] <OvenWerks> glad it works.
[16:29] <Eickmeyer[m]> Mauro Gaspari: I think the developer of Carla likes his feature requests to be at https://github.com/falktx/carla/issues.
[16:56] <Eickmeyer[m]> OvenWerks: Looks like you just got the go-ahead.
[19:46] <OvenWerks> Eickmeyer[m]: cool, will deal with it in about 2 hours :)
[19:47] <Eickmeyer[m]> 👍️
[21:26] <OvenWerks> Eickmeyer[m]: Studio-controls 2.0.9
[21:28] <OvenWerks> Eickmeyer[m]: new dev started at 2.0.21 for the eventual 2.1.0
[21:29] <Eickmeyer[m]> OvenWerks: Ok, working on 2.0.9.