[04:43] <ubuntu-studio> hi all
[05:29] <bigfluff> So, Kubuntu == Ubuntu under the hood?  Really not a whole lot of difference in terms of system perspective?
[06:38] <Unit193> Basically, yeah.
 How to fix this error?
 (Video, 5s)https://irc-attachments.kde.org/c1FD2d9Y/file_38892.mp4
 Snd_hda_intel 0000:08:00.1: no codecs found!
 https://askubuntu.com/questions/1204571/chromium-without-snap … Found this blog but … Should I add debian repo on ubuntu? … I read somewhere, doing that isn't a good idea … Idk
 Hello I have this issue, if I restart or shut down or the laptop go to stand by the screen just get frozen
 I just can move te mouse
 (Photo, 720x1280) https://irc-attachments.kde.org/NfC0C7B9/file_38896.jpg
 I have ubuntu cinnamon and kde Installed just happens when I choose kde desktop
 @diiegg, Install kubuntu rather than using kde environment on Ubuntu
 @SharGen19, If I install the full remix then I can uninstall cinnamon ?
 I remember I use to have ubuntu and I converted to ubuntu cinnamon remix with some commands the guys of cinnamon help me I wonder if the same case with Kubuntu ?
 @diiegg, Don't use another DE in default DE
 It will messed up
 @diiegg, Kubuntu lts is already rock stable to use
 I understand just have some configuration on my lap that don't want to configure again 😆
 @diiegg, Make an additional efi partition if you are using dual boot
 Ok thanks
[13:20] <fahad-M> i have installed like 3 DEs on my hard disk drive, ubuntu, dde ubuntu, kde etc
[13:20] <fahad-M> never had any problems as of now
[13:21] <fahad-M> in fact, if you wanna enjoy linux, it won't be fun without small issues so i prefer to install DEs over a base
[13:22] <fahad-M> but if you don't wanna run into any issues at all, which you will sooner or later anyway in linux lol, go clean install, if you don't mind banging your head into wall, come let's install another DE on your base haha
 I understand
 @fahad-M, Lol there is no base in ubuntu … Ubuntu comes with de
 I have a issue when I load kde environment and I shutdown the computer it get frozen any idea how can I fix that ?
 I install the kde standard
 @diiegg, What's your laptop specs?
 I have a asus Tachi core i5
 Instel HD graphics 4000
 64 bits
 @diiegg, Then there should be no issues … Intel is very compatible with Linux
 @Archxlover, It just happens when shutdown
 @diiegg, And which kernel u using?
 Give me a second
 Please
 @diiegg, Ol
 5.4.0-53 generic
 @diiegg, Lol
 @diiegg, Install xanmod kernel and then check again
 Ok
 @diiegg, Visit xanmod website and copy paste the process
 It's easy
 I used before
 @diiegg, Make sure use stable one
 @diiegg, 5.9.x have lots of issues
[14:29] <tomreyn> diegg: i didn't follow the chat and don't know which problem you're trying to solve, but note that this other kernel Archxlover recommended isn't supported here (it may or may not work for you, though).
[14:30] <BluesKaj> Hi all
[14:31] <tomreyn> hi BluesKaj.
[14:32] <tomreyn> diiegg: see above (i mistyped your nickname initially) and have a look at your system logs as well. acpi errors and hints on broken bios could well explain problems with shutting down properly, too.
[14:32] <BluesKaj> hey tomreyn
 @tomreyn, The problem is the following, if I restart it shutdown my lap, using kde environment the screen just get frozen
 Just can move the 🐁
 (Video, 7s)https://irc-attachments.kde.org/09uprFSH/file_38900.mp4
[14:35] <tomreyn> diiegg: is this s new installation, did it work previously?
[14:35] <tomreyn> *a new
 Not new i have cinamon and I installed kde environment standard, if I want to reboot it shutdown I need use the terminal, using cinamon no problem
[14:37] <tomreyn> diiegg: things you can try to shut down properly in this situation, thus preserving logs: press Ctrl-Alt-F3, which should give you a text console, press Ctrl-Alt-Del once (you can also log in to the text console and attempt to examine the situation further - using the shell)
[14:39] <tomreyn> so you're saying you initially install some version of Ubuntu Mate, then decided to install a kde environment, and since then, the desktop does not start up fine anymore?
[14:40] <tomreyn> or does kde actually work but the screen only freezes when you select the option to shut down from kde?
 @tomreyn, Desktop start fine all good, the problem is when I shutdown, reboot the computer it get frozen and no action
 @tomreyn, Yes
[14:40] <tomreyn> how did you install the kde desktop?
 Not action
 (Video, 20s)https://irc-attachments.kde.org/Gz3yWEvt/file_38901.mp4
[14:42] <tomreyn> thanks for the videos, it doesn't answer the latest question, though.
 @tomreyn, sudo apt install kde-standard
 @Archxlover, Is it really necessary?
[14:44] <tomreyn> i'm not sure whether that's the right package to install, or whether you can safely switch from Ubuntu Mate to a KDE desktop. But from what you say it seems to have succeeded for the most part. MAybe install kubuntu-desktop to be sure you have all components.
[14:44] <tomreyn> diiegg ^
 @binarymatter, Yes
[14:45] <tomreyn> diiegg: i suggest you share your logs, too. journalctl -b | nc termbin.com 9999
[14:46] <tomreyn> diiegg: also from the previous boot: journalctl -b -1 | nc termbin.com 9999
 @Archxlover, Actually I really need some knowledge in this.. I have been using it by mounting the windows efi partition..also some people mentioned that using 2 efi partitions can cause issues while we try to format windows. Is it true?
 @binarymatter, Bro depends on bios … My bios don't need another efi for linux … But in arch Linux it requires
 @Archxlover, Ooh likewise
 @binarymatter, Try with two partition … Root  … And swap
 @tomreyn, I just install kde desktop but 0 new installation
 If it not gives dual boot  … Then try with 3 partition … Root … Swap … And fat32-efi
 @Archxlover, @binarymatter
 Yaya
 (Video, 14s)https://irc-attachments.kde.org/Nkg8qVCc/file_38835.mp4
 Lol
 @Archxlover, Tf u always come up with this shit😂😂
 @binarymatter, Best
 Literally everywhere😂😂
 @binarymatter, Yes … Entertainment is necessary
 @Archxlover, 👍👍noizzz
[14:51] <tomreyn> let me know when you'll have logs to inspect. i'd recommend you do a full new installation when switching from Ubuntu Mate to Kubuntu, though.
[14:51] <tomreyn> those are very different flavours
 @tomreyn, Where I can get the logs from kde ?
[14:52] <tomreyn> you mean kde only logs?
[14:53] <tomreyn> i provided commands above to share complete system logs
 Ok
 I share already
[15:00] <tomreyn> you'd need to post the urls here
 Https://term in/zqlq
 https://termin.com/zqlq
[15:02] <tomreyn> https://termbin.com/zqlq is a 404
[15:02] <tomreyn> https://termbin.com/zq1q exists
[15:03] <tomreyn> you're running a kernel that's not supported here.
[15:03] <tomreyn> please produce a log with a supported kernel image
[15:07] <tomreyn> this laptop has 4 GB RAM installed, that's (just) the minimum requirement for kubuntu.
[15:12] <tomreyn> the root cuase of the logout 'freeze' is logged after the line containing this: file:///home/diego/.local/share/plasma/look-and-feel/Sweet/contents/logout/Logout.qml
[15:12] <tomreyn> it's a broken QML file
[15:13] <tomreyn> diiegg: ^
 I see
 It's any way to fix it ?
 Reinstalling the theme ?
[15:22] <tomreyn> diiegg:  if your custom theme is broken, you'll either need to fix it yourself, find a fixed copy, or revert to a standard theme.
 [..] Maybe install kubuntu-desktop to be sure you have all components.
 [..] i'd recommend you do a full new installation when switching from Ubuntu Mate to Kubuntu, though.
 @diiegg, Xanmod installed?
 @Archxlover, Yes
 @diiegg, Bro try endeavour os … it's really a good linux
 Based on arch
 It's my first choice
 @diiegg, Boot delay fixed?
[15:29] <tomreyn> Archxlover: Let's please focus on Kubuntu support here. There's also #kubuntu-offtopic for other topics (i'm not sure there is an irc<->telegram bridge for it, though)
 I fix the problem
 Thanks so much guys
 👍
 @diiegg, Xanmod fixed it?
 @Archxlover, No man, i fixed with the insights the guys give me
 I replaced the damage file
 @diiegg, Oh okay
 Fwd from Brown: Invest $1 today and make much profit of $200 every 30min, without spending money to anyone, or getting scammed  … Contact us  … 👇👇👇👇 … @AAERYfHUko7396