 Oof
 @kokonutti [Yes], Once set up its actually very easy to use fwiw
 @Fuseteam [Oof], I'm actually looking into a package manager that may work with ut ro rootfs but armhf is not officially supported
 @Fuseteam [Oof], [Edit] I'm actually looking into a package manager that may work with ut ro rootfs but armhf is not officially supported btw
 @Fuseteam [Oof], [Edit] I'm actually looking into a package manager that may work with ut ro rootfs but armhf is not officially supported by it
 @Fuseteam [Once set up its actually very easy to use fwiw], Okay, maybe I should try and do orb
 @Fuseteam [Once set up its actually very easy to use fwiw], [Edit] Okay, maybe I should try and do it
 Thanks to everyone for listening my stupid questions and answering in such nice manner
 @Fuseteam [Once set up its actually very easy to use fwiw], And apps installed in it are mostly non touch supported?
 (which is no problem for me)
 @kokonutti [Armv7], Dumb question, does that support armhf packages
 @kokonutti [Dumb question, does that support armhf packages], This night be out of scope but if it does I'll be happy
 Anyone else notice micro stutters with audio playback on the xperia x? … wired or bluetooth
[06:44] <ubptgbot> MartinWendt was added by: MartinWendt
 Good morning and Hi. Pine phone anyone here? :)
 @MartinWendt [Good morning and Hi. Pine phone anyone here? :)], Why not try https://t.me/utonpine
 thanks for the link, I finally tested it on TELEports 😄
 Florian: ah, thnks. so you suggest that rather?
 @MartinWendt [Florian: ah, thnks. so you suggest that rather?], Here you will also find Pinephone people but why not go for the concentrated essence of it ,9
 @Schmuel [The only thing I mentioned so far is that the sync of CalDav is a bit slow (but …], I think you are very competent in daily work with CalDav, so I want to ask you a question: Do you know a calendar suitable for UT, where it is possible, to copy and insert a date with 2 klicks or kontext-menu? I have the same daily dates oft
[08:30] <ubptgbot> en in one week and I don`t want to edit each date, it is boring. Till this time, I use WeekCal on Iphone, where it is possible to copy and insert and want to use Vollaphone for daily use. Thank you!
 @Floh
 [Edit] @Flohack You're right :) Thanks and have a nice day!
 @nadennmallos [I think you are very competent in daily work with CalDav, so I want to ask you a …], I'm afraid I can't help you with that, as I am new to UT as well. I didn't found such a feature since now. … But this doesn't affect me that much as I manage most of the date with my Ubuntu PC running Thunderbird... maybe someone else here
[08:36] <ubptgbot> can help you with the issue
 @Schmuel [I'm afraid I can't help you with that, as I am new to UT as well. I didn't found …], Thank you, in Volla Usergroup they don`t have a answer too. Marc Aurel says, it is only possible to edit the event.
 In VollaOS, too
 @Javacookies [Anyone else notice micro stutters with audio playback on the xperia x? … wired or …], While listening to local or online stream?
 @nadennmallos [I think you are very competent in daily work with CalDav, so I want to ask you a …], In Calendar app in  UT, you can set repetitions. You just have to define that in the "Details" part of the event.
 @nadennmallos [Thank you, in Volla Usergroup they don`t have a answer too. Marc Aurel says, it …], Copy it on desktop and then synch the calendar
 @nadennmallos [I think you are very competent in daily work with CalDav, so I want to ask you a …], I thought about that feature being useful too for irregular repeated events. First step might be to create a feature request at calendar apps repo.
 @libremax [In Calendar app in  UT, you can set repetitions. You just have to define that in …], Thank you, I know, but the time of the events are changing, so I had to edit them all. I found KOrganizer from KDE-Community, there it is possible to copy and paste the event in another day. But yet it dos`nt fit to Smartphonescreen. Perha
[10:04] <ubptgbot> ps it will be edited in future, when KDE is shipped with Pinephone.
 @waldbursche [Copy it on desktop and then synch the calendar], Yes Joerg, this is possible, but not when I`ḿ not near desktop, only with Smartphone.
 @Danfro [I thought about that feature being useful too for irregular repeated events. Fir …], You are right, I will do this.
[10:10] <ubptgbot> mahmoudtark25 was added by: mahmoudtark25
[10:50] <ubptgbot> dubsky_vojtech_cetin was added by: dubsky_vojtech_cetin
[10:51] <ubptgbot> Dubak was added by: Dubak
 Anybody here able to work on a port for the Realme XT? I can test. Or compile a patched kernel to try the GSI?
 Regarding that.. you better ask in your device specific community
[11:47] <ubptgbot> adgellida was added by: adgellida
 Hi all haha
 @adgellida [Hi all haha], Welcome
 @kokonutti [And apps installed in it are mostly non touch supported?], Yes
 @kokonutti [Dumb question, does that support armhf packages], That's what armv7 is
 @Fuseteam [That's what armv7 is], armhf is armv6, but armv7 CPUs can run armhf OSs and stuff
 it's slightly different I think
 nevermind I'm wrong
 @Ozu [Regarding that.. you better ask in your device specific community], I have. Here also seemed like a logical place to make an inquiry. Realme devices are cheap, built fairly well and price to spec offer great value in general. They also allow bootloaders to be unlocked. I'm honestly surprised they're not more popular with developers
[12:26] <ubptgbot> .
 yeah..they certainly are better than xiaomi and other chinese vendors
[13:03] <addy> I am working on a very simple and highly configurable image editor, that should also run on mobile linux. Unfortunately I do not own a ubuntu touch phone or something similar. It would be nice, if someone has time to test if my hobby project runs on ubuntu touch and/or could tell me what should be improved.
[13:04] <addy> This is the link to my project: https://gitlab.com/AdamSchrey/image_and_buttons
[13:04] <addy> You can give me feedback under: https://gitlab.com/AdamSchrey/image_and_buttons/-/issues/1
[13:04] <gitbot> image_and_buttons issue 1 in image_and_buttons "image_and_buttons on different linux phones" [Opened]
 @j_mizzle [I have. Here also seemed like a logical place to make an inquiry. Realme devices …], I Agree ,I am using realme 6 pro and would love to run Ubuntu touch
 Install OTA 14 in oneplus 3t and everything works gs-droid for camera without problems, but the new UBports-installer 0.7.2 does not recognize oneplus 3t, I had to do it with the previous version 0.6.0 and it worked 100%
 Now i have sms and call sounds
 @NunoRocha51 [Install OTA 14 in oneplus 3t and everything works gs-droid for camera without pr …], Does video recording work on your Op3t with gst-droid? It doesn't work on mine.
[13:29] <ubptgbot> abiomass was added by: abiomass
 Ubport up and running on xiaomi mi a3. Works smoothly, great job. Thanks
 @Nagendra [I Agree ,I am using realme 6 pro and would love to run Ubuntu touch], 6.5 inch 1080p amoled, 8GB RAM, 128GB expandable storage, snapdragon 712, unlockable bootloader. $300.
[13:59] <ubptgbot> <Heng Ye> (Photo, 380x800) https://irc.ubports.com/vEfTyP6R.png Where's the wallpaper for this?
 @Stefano0101 [Does video recording work on your Op3t with gst-droid? It doesn't work on mine.], No,video recordador doselete work oponlo fotos
 is there a ubuntu touch group for raspberry pi?
 @Stefano0101 [Does video recording work on your Op3t with gst-droid? It doesn't work on mine.], Video recording no only camera to meke fotos
 @NunoRocha51 [Install OTA 14 in oneplus 3t and everything works gs-droid for camera without pr …], There is a new version of Ubports Installer, 0.7.4 ; not sure it corrects thing for you. May be you can give it a try.
 @NunoRocha51 [Install OTA 14 in oneplus 3t and everything works gs-droid for camera without pr …], [Edit] There is a new version of Ubports Installer, 0.7.4 ; not sure it corrects thing for you. May be you can give it a try and if not report the issue.
 Ok
 @joeth [armhf is armv6, but armv7 CPUs can run armhf OSs and stuff], Ohw? Hmmm
 @joeth [nevermind I'm wrong], Ohw hehe
 (Sticker, 512x512) https://irc.ubports.com/qQPyRa0r.webp
 @ItsMeShouko [is there a ubuntu touch group for raspberry pi?], yes: https://t.me/UBports_pi
 Thanks
 @Nagendra [I Agree ,I am using realme 6 pro and would love to run Ubuntu touch], @j_mizzle fwiw the people most likely and able to port ubuntu touch to realme devices are the owners of realme devices; if you guys are interested the instructions can be found at https://docs.ubports.com under the porting section
 @Fuseteam gsi should be working with all devices right.. Even an obscure one?
 [Edit] @Fuseteam gsi should be working with all devices right.. Even an obscure one? If your halium is successfully built
 Yes but need the actual device to test it
 So if it does not boot only problem are to be expected from device tree..
 Is the kernel patched?
 [Edit] Is the kernel patched properly?
 Halium-boot
 you might find help with porting easier in http://t.me/halium btw
 @Ozu [So if it does not boot only problem are to be expected from device tree..], no
 because we modify kernel and system is set up in a different way from Android, there are enough things that can go wrong
 When I install the gsi.. Recovery shows no os … .
 [Edit] When I install the gsi.. Recovery shows no os.. And does not even boot
 that's is totally normal, need logs to figure out what is going on, but that is for Halium or UBPorts Porting group
 [Edit] that is totally normal, need logs to figure out what is going on, but that is for Halium or UBPorts Porting group
 OKay
 [Edit] that is totally normal, need logs to figure out what is going on, but that is for Halium or UBPorts Porting group (preferably the later)
 So https://t.me/halium or https://t.me/ubports_porting
 @Ozu [@Fuseteam gsi should be working with all devices right.. Even an obscure one? If …], That was my understanding as well. I'd try building a kernel with the patches for the XT if I had a machine to do so. So all I can do is offer to test if anybody else with the device decides to make the attempt. I'm pretty confident it isn't going
[14:51] <ubptgbot> to work but I've seen some neat things done using Termux so I might see if setting up a build environment using Termux is possible. As I've said, even if it happens to work I feel compiling anything would take a long time.
 @NunoRocha51 [Install OTA 14 in oneplus 3t and everything works gs-droid for camera without pr …], sorry to hear that. could you try again with this one for me https://github.com/ubports/ubports-installer/releases/tag/0.7.4-beta ? if it doesn't work, it'd be great if you could use the integrated bug reporting feature and i'll try and
[15:20] <ubptgbot> help you
 I install with 0.6.0 but with 0.7.2 dosen't work
 @NunoRocha51 [I install with 0.6.0 but with 0.7.2 dosen't work], Please try with the one in link, that's 0.7.4
 Ok
 (Photo, 1280x720) https://irc.ubports.com/2iN2hlai.png Dosen't work
 Device not suported
 I'm surprised it says msm8996 as the device codename
 For redmi note 4 still no official updates meanwhile unofficial port exists but it's not bug free and stable lol
 @fredldotme [I'm surprised it says msm8996 as the device codename], With the old version 0.6.0  work 100%
 Doesn't mean it's right ;)
 @NunoRocha51 [<reply to media>], @neothethird
 Are you using and Android ROM on it currently?
 No
 I don't use android only UT
 @NunoRocha51 [<reply to media>], interesting, is it in bootloader mode or system / recovery?
 Bootloader
 Fastboot
 ok, then that's the issue. what's new in the installer's 7.x series is that it's also able to detect device types from fastboot getvar. it was to be expected that we would have to add new aliases, but this is a little annoying, because msm8996 is not a device id, but the name of the chipset. if we have multiple devices with the same c
[15:40] <ubptgbot> hipset, we'll have trouble and suffering
 [Edit] ok, then that's the issue. what's new in the installer's 7.x series is that it's also able to detect device types from fastboot getvar. it was to be expected that we would have to add new aliases, but this is a little annoying, because msm8996 is not a device id, but the name of the chipset. if we have multiple devices with the
[15:40] <ubptgbot>  same chipset and they all don't set this var properly, we'll have trouble and suffering
 let's try it anyway and see how soon it breaks 🙃
 ok
 https://github.com/ubports/installer-configs/pull/47
[15:47] <gitbot> ubports issue (Pull request) 47 in installer-configs "Add msm8996 alias for oneplus3" [Open]
 alright, thanks for reporting @NunoRocha51. it's always important that we're made aware of the issues, so we can fix them for everyone :)
 @gitbot [ubports issue (Pull request) 47 in installer-configs "Add msm8996 alias for onep …], good bot
 Are there any official builds for Xiaomi device's?
 https://devices.ubuntu-touch.io/
 https://forums.ubports.com/category/46/devices
 Hmm
 Thanks
 Still my device is missing
 Hahahaha 😂
 @abiomass [Ubport up and running on xiaomi mi a3. Works smoothly, great job. Thanks], Who made the port?
 @Stereofont [Who made the port?], Mintphin
 https://devices.ubuntu-touch.io/device/laurel-sprout/
[18:17] <ubptgbot> me33YT was added by: me33YT
[18:22] <ubptgbot> Atharva23 was added by: Atharva23
 how to flash Ubuntu touch in redmi 4A
 [Edit] how to flash Ubuntu touch in redmi 4A please reply i am in recovery
 [Edit] how to flash Ubuntu touch in redmi 4A !!please reply i am in recovery!!
 Is 4A supported? I thought only 4X
 https://devices.ubuntu-touch.io/device/rolex/ see this
 It is not supported by the installer. Please read that post and ask in the forum
 so how can i install this
 You have the steps on the forum
 @mimecar [You have the steps on the forum], in xda
 UBports forum
 @mimecar [You have the steps on the forum], [Edit] in xda ??
 Under new devices
 can you please send me a link of forum i am unable to find it
 Maybe start here … https://forums.ubports.com/topic/3682/xiaomi-redmi-4x-santoni
 this is for redmi 4X not for redmi 4A
 https://forum.xda-developers.com/redmi-4a/development/ubuntu-touch-rolex-redmi4a-t4058619
 Use that
 @Anon211 [Are there any official builds for Xiaomi device's?], You are lucky some year ago we had zero ;)
 @Atharva23 [this is for redmi 4X not for redmi 4A], The porter has not created a thread. Maybe someone in there knows something. I have no idea how to contact TEA
[21:07] <ubptgbot> pom3ranc was added by: pom3ranc
 any chance of ubuntu touch coming to more devices?
 cause ubsports gsi is quite a hassle
 @me33YT [any chance of ubuntu touch coming to more devices?], What you mean more, we already have a lot, look back 1 year ^^
 "porting is a hassle, why don't you all do more of it"
 @Flohack [What you mean more, we already have a lot, look back 1 year ^^], I mean, do you officially support treble devices?
 @dohbee ["porting is a hassle, why don't you all do more of it"], I'm your average user tho,
 @me33YT [I mean, do you officially support treble devices?], Every device needs to be ported individually. So, the porter needs to own it.
 there's work happening to get recovery working for the GSI based devices
 There will never be a unique way to flash it like an Android ROM
 once that's done a lot more devices will show up in the installer
 @dohbee [once that's done a lot more devices will show up in the installer], sweet!
 And not even LineageOS has all devices. You need to find a device thats compatible, not we have to make UT compatible with all devices
 well assuming that is all that's needed still
 @Flohack [And not even LineageOS has all devices. You need to find a device thats compatib …], I just found its concept cool, and being a ubuntu user, having that experience on phone is new
 but recovery and system-image working are really the big pieces needed for getting things installable via installer
 @me33YT [I just found its concept cool, and being a ubuntu user, having that experience o …], it is not the same as using ubuntu on a PC. phones are still not PCs :)
 @dohbee [it is not the same as using ubuntu on a PC. phones are still not PCs :)], they surpass them thougu
 @dohbee [it is not the same as using ubuntu on a PC. phones are still not PCs :)], [Edit] they surpass them thougj
 @dohbee [it is not the same as using ubuntu on a PC. phones are still not PCs :)], [Edit] they surpass them though
 I run linux on my core 2 duo and my current phone has more cores and clocks higher than it
 🤣
[21:30] <ubptgbot> AaradhyaChatterjee was added by: AaradhyaChatterjee
 ok. i'm just saying, don't expect the same user experience you have with linux on your PC
 @dohbee [ok. i'm just saying, don't expect the same user experience you have with linux o …], it will be a good one nevertheless, a good change from android
 @me33YT [it will be a good one nevertheless, a good change from android], +1
 @me33YT [it will be a good one nevertheless, a good change from android], Two things to keep in mind with ut: … - Rootfs is readonly, so apt doesn't work out of the box. … - Rootfs is 2GB due to the cache limitations of phones … There ways to work around these limitations but they don't involve apt
 @nadennmallos [You are right, I will do this.], Done. https://gitlab.com/ubports/apps/calendar-app/-/issues/199
[22:21] <gitbot> Apps issue 199 in calendar-app "feature request: add option to copy a event into a new event" [Opened]
 @Fuseteam [Two things to keep in mind with ut: … - Rootfs is readonly, so apt doesn't work ou …], ouch!
 well, a workaround is there, and I dont mind spending 10 minutes or so fixing it, I have a question though … my phone space is 64gb, how will this space be used?