/srv/irclogs.ubuntu.com/2020/11/29/#ubuntu.txt

geosmileDreamPCS, yes, I did00:15
geosmileI think perhaps its expecting a 19.10 instead of a 18.04LTS repo?00:16
geosmileor something similar?00:16
DreamPCSOk, one sec.00:27
geosmileDreamPCS, thanks00:27
DreamPCSOk, my guess is your package manager isn't adding the PPA. Try to remove the repository, update, and then re-add the repository. Pay special attention to the last few lines of the output after you install the repository.00:29
DreamPCSsudo apt-add-repository -r ppa:landscape/19.1000:30
DreamPCSWill remove the repo.00:30
DreamPCS"sudo apt update" will update the package list, make sure this completes with no errors. Once that's done, you'll want to re-add the repo "sudo add-apt-repository ppa:landscape/19.10"00:31
DreamPCSAgain, pay special attention to the last few lines of output after adding the repo.00:32
DreamPCSThe last line should read "Reading package lists... Done"00:36
DreamPCSIf that's the case, then run "sudo apt update" again to update the list of packages. Finally, run "sudo apt install landscape-server-quickstart"00:37
DreamPCSIf you get an error or anything that suggests something didn't run smoothly, let us know.00:38
DreamPCSI gotta restart, brb.00:38
DreamPCSBack if you need me.00:48
geosmileDreamPCS, thanks. Trying00:49
geosmileDreamPCS, https://paste.ubuntu.com/p/txnfqhQTYD/00:51
DreamPCSOne sec00:51
DreamPCSWhat version are you using?00:54
DreamPCS18.04?00:54
geosmile20.04LTS on this machine00:55
geosmile20.04.1 LTS00:55
DreamPCSThis is the machine you're trying to install landscape on?00:55
geosmileyes00:56
DreamPCSOk, one sec.00:56
yaomtcI recently upgraded Ubuntu. For some reason, Terminal is now dark gray text on a black background.00:58
DreamPCSqeosmile: Ok, so based on what I've gathered, it doesn't look like there is a 20.04 release of landscape. I can't find a repo on launchpad that has landscape in it for 20.0401:02
Bashing-omyaomtc: Defaults. With xterm once can change the defaults to whatever one wishes. -terminal -> terminal preferences -> colors.01:03
DreamPCSI did find a website, however, that does have a debian package (.deb file) that could probably be installed on your system. *****BUT***** This is not a site controlled by Canonical and I can't vouch for these people as I have no experience with this site.01:03
DreamPCSAgain, this is NOT a site that is recommended by me or by Ubuntu, Canonical, or whomever. Use this link at YOUR OWN RISK!!! -- https://ubuntu.pkgs.org/20.04/ubuntu-main-amd64/landscape-client_19.12-0ubuntu4_amd64.deb.html01:05
DreamPCSgeosmile: See above.01:07
yaomtcBashing-om: For some reason "system theme" colors are screwed up. Thanks. I disabled that and switched to the "GNOME dark" scheme.01:07
hwpplayer1hi people!01:11
yaomtcGuess I'll report a bug01:11
hwpplayer1I just wanted to ask if there is a project by Ubuntu/Canonical for P2P, IRC and cjdns and yggdrasil or not01:12
yaomtchwpplayer1: I don't know what cjdns or yggdrasil are, but there are plenty of great apps for P2P and IRC in the software repos.01:13
hwpplayer1yaomtc: Thanks for your reply so there is utox for instance, but do Ubuntu developers commit to some project ?01:14
hwpplayer1If not i am gonna start01:14
DreamPCSyaomtc: I didn't even realize that would be something to report a bug for, thanks for that.01:15
yaomtcOh you meant P2P chat. Helps to be more specific when asking questions, there's lots of peer-to-peer technologies.01:16
hwpplayer1Not only chat, all it operations01:16
hwpplayer1Information Technologies01:17
yaomtc...you're being very vague01:17
hwpplayer1In short as i understand Canonical and Ubuntu only makes packages01:17
yaomtchwpplayer1: https://en.wikipedia.org/wiki/Canonical_(company)01:20
hwpplayer1Yes I know them01:20
yaomtcI'm showing you that they don't only make packages.01:21
hwpplayer1What I mean there is Juju developed by Canonical but if there is a project like what i mention or not01:21
yaomtcOh, no.01:21
hwpplayer1? Could you please elaborate ?01:21
yaomtcThere are not peer-to-peer applications developed by Canonical.01:22
yaomtcOr IRC applications.01:22
hwpplayer1Yes that is what i mean01:22
hwpplayer1Okay Then I'll do that01:22
hwpplayer1cylater back to work yaomtc01:23
yaomtchwpplayer1: OK, just keep in mind the other applications that already exist, and decide if what features they're lacking require a new application entirely01:23
yaomtcor if you could just contribute to the ones already there01:24
hwpplayer1I know the way01:24
hwpplayer1Yes sure01:24
geosmileDreamPCS, Is it the case that landscape is not something that Canonical is willing to maintain?01:37
=== themattbeballin is now known as WARBIRD199
=== VileGent is now known as kk4ewt
=== zbenjamin is now known as Guest54477
=== zbenjamin_ is now known as zbenjamin
=== PowerTower_121 is now known as PowerTower_120
mojtabaHello, I am using chromium, and recently I have realized when I click on the page (like anywhere) it opens a random page.02:38
hwpplayer1mojtaba: Yes You can configure it like others'02:43
mojtabahwpplayer1: What do you mean?02:43
mojtabahwpplayer1: I just wonder if I have been infected by a malware of some sort of thing!02:44
hwpplayer1mojtaba: ?02:45
mojtabahwpplayer1: I have opened google.com, and I click on the text bar to enter a text, and all of the sudden a random page opens!02:45
mojtabaIt is not always like that, it is very random.02:45
mojtabaSometimes it happens, sometimes no.02:45
hwpplayer1mojtaba: Search for Google Chrome help support channels imho02:46
mojtabaDo they have an IRC channel?02:46
hwpplayer1Or wait for others to help you02:46
juanonymouswhen testing ubuntu (live boot) can you instert other medias, like usb?05:10
juanonymousweb cameras?05:10
quadrathoch2Yes05:12
quadrathoch2juanonymous05:12
juanonymousgood05:13
juanonymousnice05:13
DerpoDragohello05:38
=== gorillatypist is now known as pikapika
DerpoDragocan someone help me05:40
Bashing-om!ask | DerpoDrago05:41
ubottuDerpoDrago: Please don't ask to ask a question, simply ask the question (all on ONE line and in the channel, so that others can read and follow it easily). If anyone knows the answer they will most likely reply. :-) See also !patience05:41
DerpoDragohi i am trying to manually boot from grub 2.04 and whenever i type the command "linux /boot/vinuz-5.4.0-54-generic root=/dev/sda4", it spits out "error: too deep nesting of symlinks" and doesnt do anything else. how can i fix this?05:47
=== chown is now known as EnchanterTim
=== EnchanterTim is now known as Hash
newdimension_Is there a way to elevate change directory operations? Whenever I need to access folders that are limited to the root user (e.g. /etc/wireguard) I run "sudo su". Just wondering if what I'm doing is correct08:30
=== newdimension_ is now known as newdimension
matsamannewdimension: used to be plain 'su' would suffice, but a lot of distros have adopted a thorough abuse of sudo at this point instead08:36
matsamanUbuntu included08:36
matsamanso if plain 'su' doesn't work to become root, I see no problem with running 'sudo su' and calling it a day08:37
newdimensionGot it, thanks for the feedbak08:37
newdimension*feedback08:37
mojtabaDoes anybody know how to fix easystroke crashing in Ubuntu 20.04?08:44
matsamanmojtaba: run it from a terminal and get an error message08:47
mojtabamatsaman: The error is paste.ubuntu.com/p/5ctth2dt4c08:51
mojtabamatsaman: Sorry the correct page is http://paste.ubuntu.com/p/5ctth2dt4C/08:57
matsamanmojtaba: search engine says: https://ubuntuforums.org/archive/index.php/t-2333750.html08:58
matsamanpossibly not perfectly maintained software08:59
matsamanmojtaba: so basically maybe this: https://github.com/thjaeger/easystroke/pull/1309:02
mojtabamatsaman: So do you know what should I do to fix it?09:04
matsamanmojtaba: either patch it yourself with the information in the links provided and build it and install that fixed version, or seek out someone else's build that's done the same09:07
mojtabamatsaman: Ok, thanks.09:11
matsamanmojtaba: https://github.com/thjaeger/easystroke/tarball/pull/13/head https://github.com/thjaeger/easystroke/wiki/BuildInstructions09:12
matsamanmojtaba: the 'checkinstall' package might also be worth using for this purpose, so your package manager still keeps track09:13
matsamanhttps://wiki.debian.org/CheckInstall09:13
cxlHi all, I have a systemd user unit that runs borgmatic (which uses ssh under the hood to connect to the backup server). The problem is that I am using a host defined in my ~/.ssh/config, and when the user unit runs it can't find the host because I guess it doesn't read my ~/.ssh/config. How do I make the systemd unit "see" that ssh config file?09:14
cxlon 20.0409:14
matsamancxl: ssh -F ?09:18
matsamanor determine the user being used, and set up a ~/.ssh/ for that user as desired, etc.09:18
cxlI tried the -F but it didn't help. Either with ~/.ssh/config or /home/me/.ssh/config. How do I find out what user does the systemd user unit run as? Isn't it my own user?09:20
matsamancxl: probably not, not by default, no09:25
matsamantelling your service/unit to just run 'whoami' to a log file is usually helpful09:25
cxlmatsaman: echo `whoami` would be enough?09:26
matsamancxl: as long as you can see the output, sure09:32
TJ-cxl: "systemctl --user cat <service-name>" will show the unit file which should help ID the user account.09:44
TJ-cxl: the system-wide unit has " ExecStart=systemd-inhibit --who="borgmatic" ..."09:45
morrisDoes anyone know how to fix csgo_linux64 not responding in steam?09:45
lotuspsychjemorris: launch steam from terminal and open a journalctl -f running on the background, then provide us logs/errors09:46
morrisAnd the minimizing of the initial screen to meny?09:46
morrisok09:46
morrisHmmm i'm new to this one started journalctl -f but how do i start steam afterwards09:48
lotuspsychjemorris: a new terminal and launch steam typing steam09:49
morrisalles gut09:49
morrisnov 29 10:50:10 OptiPlex-7010 gnome-shell[1677]: Window manager warning: Buggy client sent a _NET_ACTIVE_WINDOW message with a timestamp of 0 for 0x460000509:50
lotuspsychjemorris: use a pastebin and paste the whole 2 logs of both steam and journal09:51
morrisokay09:51
morrishttps://pastebin.com/G9Te3PY209:57
lotuspsychjehmm a lot of failed errors on steam09:59
=== denningsrogue3 is now known as denningsrogue
lotuspsychjemorris: can you pastebin; sudo lshw -C video && uname -a10:01
morrisI know... Official ubuntu nvidia driver 455 and installed from console10:02
morrishttps://pastebin.com/Tu9xy3gd10:04
lotuspsychjeallrighty, thats looking good morris10:05
lotuspsychjemorris: so where is your game getting stuck exactly?10:09
morrisIn the beginning of the initial game. Getting a sign that says csgo_linux64 is not responding. Option to force quit or just wait10:10
morrismaybe exted the period of thime for the sign to start appear for like say 30 sec10:12
matsamanfailed errors10:12
matsamanthat's success, no? =)10:12
morris:)10:14
lotuspsychjemorris: can you try disable shader pre-caching in the Steam settings?10:14
morriswill se10:14
morrisingame or steam client?10:16
morrisfound it10:16
morrisstill the same problem...10:18
lotuspsychjeok10:18
morrisjust to click wait and it starts... But it's anoying10:19
lotuspsychjemorris: what about launching with -nojoy10:19
morriswill give it a go10:20
morrisdid not work10:21
morrisstill the same problem10:22
lotuspsychjeok im out of ideas then morris10:22
lotuspsychjemorris: your apt isnt giving you errors on; sudo apt update && sudo apt full-upgrade ?10:23
Jayx276Hello. How does Ubuntu automatically partition disk. My disk was partitioned by one efi partition(512mb) and rest ext4. I managed to overwrite the first 50mb and lost both partitions - test disk & gparted cannot recover partitions. The disk is 120034123776 bytes and 234441648 sectors10:24
morrisno it's perfect10:25
morrisI guess i will have to live whit it for now on... Thanks for trying to help me out...10:27
lotuspsychjemorris: ok, see also the #gamingonlinux channel maybe they know whats this about10:27
morrisi will give it a go10:27
TJ-Jayx276: how did you manage that? did you choose "something else" in the installer? You can still recover the partitions but you'd need to rebuild the EFI-SP10:29
TJ-Jayx276: only needs 3 key-presses in gdisk to recover the partition table10:55
Jayx276Ok10:59
Jayx276I will try11:00
TJ-Jayx276: I presume you're using a Live ISO boot to try to recover?11:00
TJ-Jayx276: in which case open a terminal shell, then use "sudo gdisk /dev/sdX" where 'X' is the damaged device11:00
TJ-Jayx276: there you'll get warnings about the broken partition "Found invalid MBR and corrupt GPT. What do you want to do? " - choose option "1 - Use current GPT " then press 'r' to go to the "Recovery/transformation" sub-menu then press 'b' to "use backup GPT header (rebuilding main)" then 'p' to print the table to check it, then 'w' to write it to disk11:02
TJ-Jayx276: You may need to also run "sudo partprobe /dev/sdX" to tell the kernel to re-read the partition table11:04
TJ-Jayx276: then check the ext4 file-system is OK with "sudo fsck /dev/sdX"11:05
TJ-Jayx276: then recreate the EFI-SP: "sudo mkfs.vfat -n EFI-SP -F 16 /dev/sdX1" (assuming it *IS* partition 1 on sdX)11:07
TJ-Jayx276: you'll still need to recreate the directory structure and re-install GRUB to the EFI-SP of course11:07
fattestHi. I'm on ubuntu 20.04 desktop. My /etc/resolv.conf keeps changing to nameserver 127.0.0.53 which I don't want. I want it to be 8.8.8.8 and 8.8.4.4 but after doing "sudo service systemd-resolved restart", it changes back to 127 nameserver. Please help https://paste.ubuntu.com/p/dQNGrP662r/12:27
fattestNot sure what to do12:27
BluesKajHi folks12:29
DeyaaI want to configure vsftp to allow anonymous upload12:39
TJ-fattest: that is as it should be! /etc/resolv.conf points to the local stub resolver12:41
fattestTJ- how do I use Google's nameserver 8.8.8.8 and 8.8.4.4 ?12:41
TJ-fattest: set the manual DNS IP addresses in the network config for the interface12:41
TJ-fattest: that means the NetworkManager Edit Connection from  nm-applet (the network icon in the notification area)12:42
fattestTJ- I have done this https://i.imgur.com/re6OoiO.png12:42
TJ-fattest: that's correct; so the stub resolver will use those12:43
TJ-fattest: "resolvectl status" to check which DNS servers are used on each link12:44
fattestTJ- https://paste.ubuntu.com/p/82G2c8CdkV/12:44
fattesthow does this look?12:44
fattestbut I had this on for a while12:45
fattestwhen i restart systemd-resolved, it goes back to 127.0.0.5312:45
TJ-fattest: that's correct as it is12:45
TJ-fattest: DO NOT MESS with /etc/resolv.conf12:45
TJ-fattest: 127.0.0.53 is the address of the local systemd-resolved stub resolver, and THAT uses the upstream DNS servers you've set12:45
fattestoh i see12:46
fattestthank you for this12:46
TJ-fattest: :)12:46
XardI'm having some issues with snd-intel-hda ACL1220 microphone input with Ubuntu 20.04: after boot it's fine for a while but after some time the quality drops abysmal and even gnome sound input panel volume levels update only couple of frames per second13:59
BarFooHi, I have a weird issue14:12
BarFooI have an ethernet cable that works with computer A and not computer B14:13
BarFooboth are running 18.0414:13
BarFooUp until today it worked with computer B14:13
BarFoobut I moved computer B to a new room, NetworkManager no longer has any option to connect to ethernet (can give screenshot or something)14:14
BarFooAnyway, i can unplug the ethernet from my desktop machine, plug it into my laptop, and it works perfectly14:14
BarFooAnyone have any ideas?14:16
BarFootrying live usb right now, see if it's maybe a hardware problem or NetworkManager messing with me14:18
BarFooLiveCD works14:24
BarFoook so it's NetworkManager playing games with me14:24
=== Mollerz1 is now known as Mollerz
thumbfingerI am trying to install xubuntu on a PC with integrated storage and an SSD I installed myself.  The installer, after picking "Install alongside Windows Boot Manager" only offers to install to internal storage by resizing my Windows partition.  I can see my SSD drive in gparted and in the "Something else" option.  Am I missing something?  I want to keep my Windows boot and Xubuntu boot separate.15:05
thumbfingerThe machine I am talking about is a CHUWI Larkbox15:05
Xardokay, I after shutting down --user pulseaudio.service and pulseaudio.socket I can reload snd_hda_intel kernel module and start pulseaudio after that and the microphone works again for some time15:36
thumbfingerApparently initializing the secondary drive in Windows was what I needed to do for it to show up in the installer...15:38
FreeBDSMomg, damn ubuntu installer doesn't let me to change input language to english on the stage where I need to enter my name, my pc name and my user name. Shift+alt simply doesn't switch the language, although said hotkey worked juuuust fine on the stage where I selected language input. And now installer won't let me go back to the language change to choose english.15:44
FreeBDSMin other words, choosing non-english language on earlier stage forces user to name their pc, built-in user and said user's name in the same language. Such bugs are just ridiculous. Right in the fucking installer!15:45
legomaniacfrhello15:46
thumbfingerI've seen worse.  Maybe try other common shortcuts, too?  I actually installing now, but I'm in too deep to test that.  Ctrl+Space is common, as is Win+Space, worth a try.15:47
FreeBDSMoh, and the cherry on top: it just won't let you specify username! because it expects first char to be a latin char15:47
FreeBDSMwhat the fuck15:47
legomaniacfrwhat is the best distro15:47
FreeBDSMlegomaniacfr: not Xubuntu15:48
* thumbfinger nervously continues installing xubuntu15:48
legomaniacfrim not using xubuntu im ubuntu mate15:48
legomaniacfrwhat is the best software for sound15:50
legomaniacfrfor linux15:50
thumbfingerI think Ubuntu uses PulseAudio15:50
legomaniacfrwell i know that15:51
legomaniacfralso how you can make a blog with wordpress on firefox15:52
FreeBDSMwhat15:52
thumbfingerIt's hard to guess what stage you need help with based on that question.15:52
legomaniacfrwell how to install wordpress15:52
FreeBDSMhire a guy15:53
thumbfingerlol15:53
legomaniacfrok that was maybe the worst question that i just say (sorry for bad english im french)15:54
thumbfingerTo get you started learning, I'd look into installing a LAMP stack.  Once you're comfortable with that, figure out if you want to pay for web hosting.  If you just want to have a blog and now learn about web hosting, etc. then yeah, hire a guy.15:54
legomaniacfrok15:54
FreeBDSMthe question just has nothing to do with #ubuntu irc channel, so it's offtopic here15:55
FreeBDSMjust write /join #wordpress and ask there15:55
legomaniacfrok15:55
FreeBDSMthey might have all the necessary articles already written and waiting for you to read them15:55
legomaniacfrbut also a question it have to do with ubuntu how i can put the old gnome font of ubuntu between the 4.10 and 8.1015:56
XardOkay I managed to get some progress with modifying modprobe parameters "snd_hda_intel bdl_pos_adj=64,64" (HDMI and ACL1220)15:57
legomaniacfrok15:58
FreeBDSMhow come ubuntu degraded so much? 18.04 is so much better than 20.0416:08
Maik!discuss | FreeBDSM16:09
ubottuFreeBDSM: Want to talk about Ubuntu, but don't have a support question? /join #ubuntu-discuss for non-support Ubuntu discussion, or try #ubuntu-offtopic for general chat. Thanks!16:09
RadSurferIS THERE anyone here who understands how "Encoding" options work in a Terminal? I need some information please.16:11
Maik!ask | RadSurfer16:12
ubottuRadSurfer: Please don't ask to ask a question, simply ask the question (all on ONE line and in the channel, so that others can read and follow it easily). If anyone knows the answer they will most likely reply. :-) See also !patience16:12
Maik!patience16:12
ubottuDon't feel ignored and repeat your question quickly; if nobody knows your answer, nobody will answer you. While you wait, try searching https://help.ubuntu.com or https://ubuntuforums.org or https://askubuntu.com/16:12
RadSurferCan I add and/or modify existing "Encoding" options available to a Terminal?16:12
RadSurferAre these files that can be examined, edited or what?16:13
RadSurferfor that matter, why aren't classic normal Encoding options available in Ubuntu terminals?16:14
FreeBDSMMaik: I have a support question: how to fucking change the system language from english to a different one in the goddamn 20.04 LTS ubuntu (xfce)?16:25
FreeBDSMit just lists my language as grayed out16:25
FreeBDSMand I can't pick it to apply system wide16:25
FreeBDSMthis situation is just top ridiculous16:26
MaikFreeBDSM: please mind your language16:26
FreeBDSMMaik: please understand my anger16:28
thumbfingerNobody is even going to be able to tell you what the issue is or if there is a solution unless you say what your language is.  If you're looking for the interface in k'iche, there's probably no solution for you.  If you're looking for it in German, there probably is.16:28
N3bulaKHow to I pastebin the following command? sudo dmidecode --type 1716:29
RadSurferredirect to file, than paste into a pastebin?16:30
MaikFreeBDSM: you can be angry and frustrated but there are rules and guidlines for using this suppoert channel. You know that very well.16:30
N3bulaKRadSurfer: ?16:30
thumbfingerfubar >> fubar.txt16:30
gigi2Hello everybody, I wonder if anyone could help me with a problem I ve been trying to solve the last 7 hours with my version of ubuntu. Can anyone dedicate some time please?16:30
* Maik is afk16:30
RadSurferex. sudo dmidecode --type 17 >>fubar.txt16:30
RadSurfer>> means to append if necessary16:30
N3bulaKbut can I upload the information to share with others?16:31
RadSurferif U like.16:31
RadSurferExample: pastebin.com16:31
thumbfingeropen with a text editor, then copy and paste from that16:31
RadSurferopen file in text editor, copy to clipboard, paste in website.16:31
RadSurferhaha!16:32
N3bulaKsudo dmidecode --type 17 pastebin or something?16:32
RadSurferas a single command? not I'm aware of16:32
N3bulaKRadSurfer: ok16:32
N3bulaKI remember seeing something16:32
N3bulaKone command to use the output and paste it to pastebun16:32
N3bulaKpastebin*16:32
thumbfingerMalik: You should turn off the away notification...16:32
Maikthumbfinger: that wasn't a away notification, just me saying it16:33
DJones!pastebinit | N3bulaK16:34
ubottuN3bulaK: pastebinit is the command-line equivalent of !pastebin - Command output, or other text can be redirected to pastebinit, which then reports an URL containing the output - To use pastebinit, install the « pastebinit » package from a package manager - Simple usage: command | pastebinit16:34
N3bulaKubottu: thanks, that is it16:35
N3bulaKDJones: Thanks16:35
DJonesN3bulaK: You're welcome16:35
DJonesHope it helps diagnose your issue16:36
thumbfingerJust an FYI, "command >> file" will redirect SDOUT to a file.  "command | command" will redirect STDOUT to another command.  "sudo dmidecode --type 17 pastebin" would attempt to pass pastebin as an argument to dmidecode.16:38
N3bulaKthumbfinger: Thanks16:39
xMeiahello, how do I get my windows in taskbar to open to the right of my icons instead of pushing them further to the right on the taskbar16:39
gigi2I m a beginner.My version is 18.04.5 LTS bionic, i installed it to an old acer. I did the mistake to choose the 32bit version, and now it is impossible to use programs such as skype and zoom. How do I upgrade to a different lubuntu version such as 20.04.1 for example?16:39
gigi264bit obviously16:40
thumbfingerEasiest way will be to re-install from scratch.16:41
N3bulaKIs there a way to find out if my RAM will be compatible with AMD motherboard/CPU?16:42
gigi2anyone??16:51
hwpplayer1gigi2: Yep16:51
coconutgigi2, you can do a do-release-upgrade, but i don't think that will upgrade it from 32 to 64 bit by itself too. I would either google for that, or reinstall from scratch with 20.04.1.16:53
ambidextroseso i have the 14.04 minimal ISO and a 15.10 system with infected dbus processes... there's a way to boot minimal, chroot into the 15.10, and install the older systemd that comes packaged with minimal.iso from scratch, right? or can i port the system to sysvinit?17:01
Eickmeyer[m]!eol | ambidextrose17:01
ubottuambidextrose: End-Of-Life is when security updates and support for an Ubuntu release stop. Make sure to update Ubuntu before it goes EOL so you get updates promptly for newly-discovered security vulnerabilities. See https://help.ubuntu.com/community/EOL and https://wiki.ubuntu.com/Releases for more info. Looking to upgrade from an EOL release? See https://help.ubuntu.com/community/EOLUpgrades17:01
ambidextroseyeah i'm just trying to keep doing my research17:14
ambidextrosewell at least i know why i'm quitting ubuntu17:17
FreeBDSMis port 22 forbidden for incoming connections by default on 20.04?17:53
thdootdootmanshmushmuntu17:59
thdootdootmany download so slo17:59
rfmFreeBDSM, not forbidden but the default desktop install doesn't include sshd.  "apt install opensshd-server" is what I do.18:00
FreeBDSMrfm: oh, thanks.18:01
rfmFreeBDSM, it's openssh-server, without the d,, sorry.   "apt install ssh" is shorter and installs the client too..18:05
FreeBDSMhow to tell ssh client to prioritize password over keys?18:08
FreeBDSM`ssh -o PreferredAuthenticationspassword myhost`18:09
FreeBDSMthanks18:09
krytarikAnd here I thought everybody just disabled that for security reasons even..18:21
RadSurferAnyone understand how Code-pages and Encoding works in Terminal? Need some assistance.18:24
tomreynRadSurfer: probably. but you won't get to know until you ask your actual question so that anyone can respond to it. ;-)18:27
RadSurfer[11:12:58] <RadSurfer> Can I add and/or modify existing "Encoding" options available to a Terminal? Are these files that can be examined, edited or what?18:27
krytarikYou are slightly cryptic there really..18:29
RadSurferI wish to know why CP437 is not offered in Ubuntu Terminal; can it be specifically added?18:29
RadSurferclosest thing offered is "IBM850"18:29
krytarikWell, it should be the same as in any other app though.18:31
RadSurferEvidently it is not.18:31
RadSurferdoesn't answer my other question: Can additional code pages be added manually?18:31
kk4ewthttps://stackoverflow.com/questions/40953596/linux-console-how-to-change-the-codepage-to-dos-cp43718:32
RadSurferThat's a start I suppose, thanks.18:33
RadSurferDon't understand why most popular codepage is not just offered! CP437 (IBM850 is a close "substitute")18:34
ioriahttps://nethackwiki.com/wiki/IBMgraphics#gnome-terminal   RadSurfer18:34
tomreyncan you discuss the use case? i'm really interested.18:34
RadSurfer8..6..2..?18:35
RadSurferholy cow!18:36
RadSurferThank you, that last link was useful.18:36
RadSurfernot like I was going to go through every possible entry in "encoding", lol.18:37
RadSurferWould to learn how it all actually works, so I understand technical side of it.18:37
RadSurfer^like18:37
RadSurfer862 is not perfect, but 128-255 characters are there.18:38
RadSurferCP437 is only one that properly maps ALL the characters as would be expected.18:39
RadSurferThen there's also consideration which FONT is used; also plays a diabolical role in things!18:41
coconutAny way to create year- and timestamps in history file?18:47
tomreyncoconut: HISTTIMEFORMAT='%Y-%m-%d %H:%M:%S ' history | less18:51
tomreyni'm assuming you're referring to the shell history.18:51
coconutyup i do indeed18:51
tomreynoh wait this doesn'T actually work18:52
coconutbut can i configure it by default?18:52
tomreyni think time stamps of those commands aren't recorded, you'd need to use script18:52
tomreynyou'd need to set / export this variable in your login scripts. from then on, your history file should contain timestamps18:55
coconuti see, thanks tomreyn18:56
morrisdoes anyone know why gnome is a bit sensetive to csgo showing csgo_linux64 not responding all the time at startup?18:57
tomreynsee 'man 1 bash' -> HISTTIMEFORMAT and 'man 3 strftime' for details18:57
coconut:)18:58
coconutAny way to go to the HISTTIMEFORMAT section in man bash at once?19:09
=== beaver is now known as Guest65465
FinboySlickGreetings people.  I'm having an issue with iptables-persistent apparently not loading my rules on boot.  I see them saved in /etc/iptables/rules.v4 and if I "service iptables restart", they get reloaded just fine.  However, if I reboot, the rules aren't there.19:18
morrisiptables-persisstent save19:23
morrisone s19:24
morrisFinboySlick iptables-persistent save19:25
FinboySlickmorris: It has to be re-saved using the service?19:25
FinboySlickmorris: I'm assuming you mean "service iptables-persistent save", right?19:26
morrisFinboySlick sudo apt update && sudo apt install iptables*19:26
FinboySlickThose are already installed.19:27
morrisFinboySlick type sudo iptables-save && sudo iptables-persistent save19:28
FinboySlickmorris: "iptables-persistent: command not found"19:29
morrisFinboySlick download nessesary files19:29
morrisdid you download all iptables stuff that i was typing19:30
FinboySlickiptables-persistent is installed but it's a service, it's not a shell command.19:30
krytarikcoconut: I was going to say you can just search for the term as usual in 'less', but it doesn't say much about it anyway - just look here instead for an example: https://askubuntu.com/questions/391082/how-to-see-time-stamps-in-bash-history - and perhaps at the strftime manpage if you need more details.19:31
morrissudo apt-get install iptables-persistent19:31
morrisAfter it's installed, you can save/reload iptables rules anytime:19:32
morrissudo /etc/init.d/iptables-persistent save19:32
morrissudo /etc/init.d/iptables-persistent reload19:32
coconutthanks :)19:32
FinboySlickmorris: "iptables-persistent is already the newest version (1.0.14)."19:32
morrisreload19:32
FinboySlickmorris: " /etc/init.d/iptables-persistent: No such file or directory"  This is ubuntu 20.04.1, btw.  If this weren't systemd, I don't think I'd be here asking for help.19:33
morriswell sorry for trying to help... Figure it out your self then on the internet19:34
morrisiptables*19:34
FinboySlickmorris: I'm grateful for your attempt to help, I just don't quite understand what you mean.  apt-get install doesn't take wildcards.19:35
morrisold one did19:35
morrisdont use it my self at the moment. Did it on Debian19:36
FinboySlickmorris: Yeah.  That's what I'm trying to diagnose.  What I did also worked on debian before.  I think it has something to do with the whole iptables-legacy thing.19:37
morrisI have been using both ap and apt-get that seems to work better sometimes dont know why19:37
morrisapt19:38
morrisbetter result whit apt-get19:38
morrisit's working for me19:39
morrissudo apt-get update && sudo apt-get install iptables*19:40
morris130Mb19:40
FinboySlickThing is that iptables-persistent is already installed.19:40
FinboySlickAre you on 20.04 ?19:40
morriswell do as i say19:40
morrisyes19:40
FinboySlickOK, the wildcard worked but those are all dev packages (along with gcc9 and what not).  The only iptables package that gets added is iptables-netflow-dkms19:43
tomreyni don't thionk it's missing packages either.19:44
morrisHave it your way. Afterwards it's sudo iptables-save && sudo iptables-persistant save19:44
morrisyou obious do19:44
morrisit works forme19:44
tomreynFinboySlick: are you on 20.04? I didn't see you state so directly.19:44
FinboySlicktomreyn: yes19:45
tomreynyou should prefer systemctl for service management, not 'service', definitely not '/etc/init.d/...'19:45
FinboySlicktomreyn: Well, iptables-persistent added the 'iptables.service' service.  If I 'restart' it, my rules get loaded just fine.19:47
tomreyni'm not entirely sure whetehr there is a systemd service file for iptables-persistent, though19:47
tomreynah, good19:47
vlmwith mdadm i created two raid 0 from 4 500G disks then i made a raid 1 from that,i was wondering,if one 500G disk fails,could i just replace the whoel raid 0 array with a 1tb disk and rebuild raid from that?19:47
FinboySlicktomreyn: My problem is that it doesn't seem to work when I reboot.19:47
tomreynFinboySlick: so check your logs about why the service would not start properly19:47
FinboySlicktomreyn: got hints as to how I'd do that, I'm really bad at systemd.19:48
tomreynjournalctl -xe iptables    i would think19:49
tomreynor just   journalctl -b    and then search for iptables (type "/iptables", then enter, then "n" to hop to the next match)19:50
FinboySlicktomreyn: Thanks, found the issue.  One of the rules calls for an ipset that doesn't exist.19:51
tomreynnice, that was easy.19:51
FinboySlicktomreyn: thanks.19:54
tomreynyou're welcome19:57
renn0xtk9sudo apt install boost-defaults20:16
renn0xtk9E: Unable to locate package boost-defaults20:16
renn0xtk9anybody knows wtf?20:16
Habbierenn0xtk9, that package does not exist in Ubuntu; why are you looking for it?20:17
renn0xtk9because I need to install boost20:18
tomreynthis *source* package exists for ubuntu20:18
tomreynhttps://packages.ubuntu.com/search?suite=default&section=all&arch=any&keywords=boost-defaults&searchon=sourcenames20:19
geosmilewhat is a good way to install nvidia drivers+cuda on a machine with 16.04 using apt-get so that update/upgrade don't break things?20:20
tomreynyou're aware of how much longer 16.04 is supported?20:21
geosmiletomreyn, 1 more year?20:22
tomreyn!16.0420:22
ubottuUbuntu 16.04 LTS (Xenial Xerus) is the 24th release of Ubuntu, supported until April 2021. Release notes at https://wiki.ubuntu.com/XenialXerus/ReleaseNotes20:22
tomreyn5 months20:22
geosmileoh! I thought it was for a year. Thanks for the update20:22
tomreyni.e. better plan on an upgrade soon, then come back to this topic.20:23
coconuttomreyn, package exist, but i cannot install it here on focal with default repo20:23
coconut(boost-defaults)20:24
tomreyncoconut: source packages would need "deb-src" lines in your apt source configuration, which you probably don't have. but i think you're actually looking for bniary packages produced from it.20:25
geosmiletomreyn, how do i backup the "/" mount only to "/mnt/databackup/backup"?20:25
krytarikcoconut: It's in the 'universe' repo, so you might need to enable it.20:25
tomreyncoconut: i.e. click on the respective "Binary packages: [show X binary packages]" link and identify the package(s) you need20:25
ioriacoconut, if you need libboost, you maybe want libboost-all-dev20:26
tomreyngeosmile: are you asking how to backup the contents of the root directory, but not its subdirectories, somehow, to a file system mounted at "/mnt/databackup/backup"?20:27
geosmiletomreyn, yes20:28
geosmilemy "/" is mounted from /dev/sdd2. I want to copy all its contents to /mnt/... which is mounted on another drive.20:28
geosmileThen I can fresh install 18.0420:29
tomreynnormally, the only files you'd have in / are symbolic links to your kernel and initrd20:30
tomreynso i'm not sure this is going to get you the result you're looking for20:30
geosmilethe problem is if i try "cp -r / /mnt/..." then that is recursive...and the machine has other drives20:30
geosmileI just want /dev/sdd2 to be backed up20:31
tomreynwhat's your goal in copying these files?20:31
coconuttomreyn, no i was just checking on the question of renn0xtk9, and i indeed do not have deb-src enabled20:33
tomreyncoconut: again, i don't think deb-src is what you want / need to "get boost". you probably want compiled libraries, not their source code.20:36
tomreynso you probably want to go with what ioria said.20:37
geosmiletomreyn, just a backup before i wipe out the drive. If I need some config files/home files, I can recover them from the backup20:38
tomreyngeosmile: so then you should probably take a copy of the relevant directories, but not the full installation. you'll want /home /etc and maybe some subdirectories of /var (such as /var/log or /var/lib/mysql), recursively.20:41
tomreyn!backup | geosmile20:41
ubottugeosmile: There are many ways to back your system up. Here's a few: https://help.ubuntu.com/community/BackupYourSystem , https://help.ubuntu.com/community/DuplicityBackupHowto , https://wiki.ubuntu.com/HomeUserBackup , https://help.ubuntu.com/community/MondoMindi - See also !sbackup, !borg, and !cloning20:41
geosmiletomreyn, thanks. I'll just manually copy /var /etc /home20:48
=== watkinsr4849 is now known as watkinsr484
kaiserhello, I am trying to get my Nvidia GPU working under ubuntu 20.04. The GPU is a Quadro P520 in a Thinkpad P43s. I have the nvidia 455.45.01 driver installed, however no matter which prime profile i select, my ubuntu always says its using the intel GPU. When i attempt to offload the gpu to a specific application, the following output shows21:00
kaiserhttps://pastebin.com/QBry5Muz21:01
morrisbios setting maybee?21:02
kaiserit detects that it supports optimus, it detects it supports prime, but nvidia detector shows no output21:02
kaiserwhich bios setting would that be?21:02
tomreyngeosmile: the easiest approach is to use, as root: tar czf /path/to/destination/mybackup.tar.gz /source/path/1 /source/path/2 ...21:02
morrissystem bios21:03
tomreyngeosmile: but be aware that some data structures, such as databases, will not backup in a consistent state if the system / service is currently active / running.21:03
morrismine has an intel to but i picked nvidia card and it works great21:03
kaiserinteresti know which bios you're talking about, are you saying there might be a bios setting to select the gpu?21:04
kaiserill try checking my bios, brb21:04
kaiserchecked bios, only graphics card settings was regarding how much vram the intel gpu gets21:09
JoniiI'm doing distro upgrade and the computer froze21:10
JoniiIs freezing(mouse, keyboard etc) normal or do I have to reboot?21:11
JoniiI've wanted for 15min now21:11
JoniiWaited*21:11
morriskaiser Does not your bios detect the nvidia card?21:16
morrisPEG21:16
kaisermorris: it has not settings relating to it21:17
morrisok21:17
morrisdisable the intel card manually then in bios21:17
kaiserpretty sure there was no option for that21:17
morrisstrange21:17
kaiserlinux def sees the gpu21:18
kaiserc:00.0 3D controller: NVIDIA Corporation GP108GLM [Quadro P520] (rev a1)21:18
kaiserfrom lspci21:18
morristhen it's not a bios setting exept i would like to be an option for disabeling the intel card21:19
morrisdo you have the quadro driver21:20
kaisermorris: the driver i have installed according to dkms status: nvidia, 455.45.01, 5.4.0-53-generic, x86_64: installed21:21
kaiseris there a specific driver besides this for quadro cards?21:22
jeremy31kaiser: does driver manager offer anything else?21:22
morrisshure is21:22
morrissure is21:23
kaiserlike the "additional drivers" app?21:23
jeremy31I haven't heard much good about nvidia 45521:23
jeremy31kaiser, yes21:23
morrishttp://www.nvidia.com/drivers21:23
kaiseryeah theres like 6 drivers it offers me, im using the open source 455 one21:23
morrisquadro to choose21:23
kaiserthe options are, 450 closed source, 418-server closed source, nvidia 455 open source, nvidia-450-server closed source, nvidia 440 server closed source and noveau xserver-xorg driver open source21:26
kaiserthis website is buggy as hell21:26
kaisereverytime i switch product series, it flickers and changes back to the first one21:27
kaiserworks fine in chrome, thats a weird firefox issue21:27
morrisi know i had the same problem21:27
kaiserdownloading the driver21:28
kaiserguess ill run it21:29
morrissave the installler for uninstallation --uninstall21:30
kaiserkk21:31
kaiserwell its building the dkms module now, waitin21:31
kaiserstaying at 5% for a while...21:36
morrishaha21:36
ham1986i did a DU command in root directory, im getting a total of 15GB out of 36GB disk, yet when unpacking a file it tells me ive run out of space. what other tools can i use for disk space?21:36
kaiserim pretty sure this is frozen21:38
morrishmmmm21:39
morrisa dumb question but did you uninstall previos driver first?21:39
kaiserno.... ll21:39
kaiserlol21:39
kaiseri should probably do that21:39
morrisyes21:40
morrisdifferent arch21:40
kaisershould --uninstall with this be good enough to remove the pre-existing driver?21:42
morrisdrivername and --uninstall21:43
morrisubuntu driver sudo apt-get remove nvidia*21:45
morrissudo apt-get autoremove21:45
morrishttps://www.allaboutlinux.eu/?s=nvidia21:45
ham1986ive been trying to install the nvidia driver (i ran the file a few times) now my drive is full. it looks to unpack in the tmp dir but theres only empty folders there. how can i clean up my tmp dir so i can unpack this file properly?21:49
kaiseralright, apparently its installed now21:50
kaiserrebooting21:50
kaisermorris: it works!21:54
morrisalles gut21:54
tomreynham1986: /tmp is usually backed by RAM (a ramdisk), so it cannot be larger than your installed physical ram. /tmp should not normally store a lot of data, though. maybe you're missing a hidden directory (starting with a dot) which was left over from your previous attmept at unpacking / installing the driver from there.21:59
tomreynthe "ncdu" software, or mbaobab, for a graphical option, can help you iodentify what's consuming disk space there22:00
tomreyn* "baobab"22:01
ham1986   5.0 GiB [##########] /usr    4.0 GiB [#######   ]  swap.img    3.3 GiB [######    ] /home    1.1 GiB [##        ] /snap  652.6 MiB [#         ] /var  648.1 MiB [#         ] /lib   81.7 MiB [          ] /boot22:17
ham1986o0o0o022:18
ham1986its in /local22:18
ham1986ncdu is awesomeeee22:18
rpnxQuestion, anyone know of a tablet I can buy with ubuntu preinstalled22:23
rpnxor, alternatively, and tablet which ubuntu is well supported on?22:24
=== watkinsr4849 is now known as watkinsr
cousteauHi!  Is it possible to disable desktop effects (Compiz) on Ubuntu 20.04?  VLC seems to perform very poorly there.  This doesn't happen in Lubuntu on the same PC23:05
cousteau(I don't know if desktop composition can be disabled or replaced with an alternative window manager.  It can in Xubuntu but well, that's Xubuntu, not Ubuntu)23:06
cousteauanyway, MPV seems to work better than VLC23:06
EriC^^cousteau: try to install compizconfig-settings-manager , sudo apt-get install compizconfig-settings-manager23:06
cousteauEriC^^, well, that would allow removing individual effects, right?  Not removing ALL the effects23:08
cousteau(and if I recall correctly, one of the "effects" is the window decoration, and I don't want to remove that)23:09
EriC^^yeah you can remove individual effects23:10
cousteauOK so I didn't want to believe askubuntu.com, which suggested to uninstall VLC and install it via apt, and well... it worked23:10
EriC^^cousteau: ah, must be something to do with the snap vlc vs ordinary package23:11
Blade-Runnerhi, i installed ubuntu after win 10 and i dont get grub at startup i get bootloader. if i dont press f9 it boots directly into win. how can this be changed?23:13
Blade-Runnershouldnt i get grub instead?23:13
EriC^^Blade-Runner: type 'sudo efibootmgr -v | nc termbin.com 9999' and paste the link here23:13
Blade-Runnerok23:13
=== xet7_ is now known as xet7
Blade-Runnerhttps://termbin.com/kimmg23:15
EriC^^Blade-Runner: you should, but some uefi firmware is tricky with non-windows OS, sometimes they give you an option in the bios/uefi to switch the order of the entries, but doing it from the software via efibootmgr it just gets reset when you reboot, sometimes you have to do a workaround if there's nothing to edit in the uefi/bios23:15
Blade-Runnerok23:16
EriC^^windows is set before ubuntu right now, so it must have reset the list after ubuntu installed and set itself first23:16
Blade-Runneryes23:16
EriC^^you can either see if you can edit the list in the bios, or do a workaround if that's not an option23:16
EriC^^is this an hp laptop?23:17
Blade-Runnerwhat do i switch in the bios? yes laptop23:17
EriC^^hp?23:17
Blade-Runneryes23:17
EriC^^ok, likely there's no list in the bios, so you'll have to do a workaround, same for my hp23:17
Blade-Runneri know nothing about what your describing23:18
EriC^^the easiest workaround i've found is to just disable the windows entry, that usually works23:18
Blade-Runnerok disable where?23:18
EriC^^type 'sudo efibootmgr -A -b 0000'23:18
EriC^^in the future if you want to re-enable it you do 'sudo efibootmgr -a -b 0000'  or whatever number the windows entry is23:19
Blade-Runneri put in your terminal command and got a list is that it?23:20
Blade-Runnerall i have to do?23:20
EriC^^yeah, it should not have a "*" next to Boot0000 now23:20
EriC^^meaning it's not active23:20
EriC^^Blade-Runner: try rebooting, see if you get grub without f923:21
Blade-Runnerok23:21
Blade-Runnerthanks :) you made it easy23:21
Blade-Runnerit worked great :)23:27
EriC^^awesome :)23:27
Blade-Runneris it possible to increase the font in grub? its very small hand hard to read23:28
Blade-Runneryes awesome23:28
EriC^^Blade-Runner: type 'sudo nano /etc/default/grub'23:29
Blade-Runnerah, edit23:30
EriC^^you want to remove the  "#"    from #GRUB_GFXMODE=640x480 so it's not commented out anymore, and change the resolution to something you like23:30
EriC^^then save and exit, and sudo update-grub to write the new grub.cfg23:30
Blade-Runnerwonderful thanks a bunch this has been an irritation for weeks :)23:30
EriC^^yeah it can be annoying, no problem23:31
Blade-Runnerthere is no line #GRUB_GFXMODE=640x48023:35
EriC^^Blade-Runner: hmm it might be towards the bottom, try scrolling down to the end of the file23:37
SupaYoshihi, how do i figure out what's wrong with my rclone.service file. error = systemd[1]: /etc/systemd/system/rclone.service:12: Missing '='.23:37
EriC^^Blade-Runner: if it's not there you can always just add it23:37
Blade-Runnerya its not there23:37
Blade-Runnerwhat do i add?23:38
basenodeanyone know why i get this error when trying to use asdf on ubuntu? https://dpaste.org/ZjSJ23:38
EriC^^Blade-Runner: GRUB_GFXMODE=1368x768 for instance23:39
Blade-Runnerok that should do it, again thanks, i'm done for today23:39
SupaYoshihttps://paste.rs/w5L23:40
EriC^^Blade-Runner: alright, remember to run 'sudo update-grub' after saving23:42
Blade-Runnergot it23:42

Generated by irclog2html.py 2.7 by Marius Gedminas - find it at mg.pov.lt!