[00:09] <ubptgbot> <Fuseteam> @just_carlod [I think, someone should create a list of unofficial and work in progress ports], those are listed on the forums
[00:09] <ubptgbot> <Fuseteam> @golliath51 [help me please], you'll find help easier in https://t.me/halium
[00:11] <ubptgbot> <Fuseteam> @just_carlod [I think, someone should create a list of unofficial and work in progress ports], [Edit] those are listed on the forums at https://forums.ubports.com/category/33/porting
[03:40] <ubptgbot> michaelsiu was added by: michaelsiu
[05:08] <ubptgbot> Steve Travers was added by: Steve Travers
[08:27] <ubptgbot> raff was added by: raff
[10:58] <ubptgbot> FFokMC was added by: FFokMC
[11:02] <ubptgbot> <kavukr> Hi everyone. I trying to connect nexus 5 to monitor with slimport. Monitor just not see signal. In setting of display enabled external display. Can anybody help with this issue?
[11:06] <ubptgbot> <Javacookies> obligatory question, are you sure it's a slimport adapter and not MHL?
[11:06] <ubptgbot> <Javacookies> if yes, there are few things that you should check or try
[11:07] <ubptgbot> <Javacookies> - provide external power in the adapter's microUSB port …  - Try a shorted HDMI cable
[11:07] <ubptgbot> <Javacookies> [Edit] - provide external power in the adapter's microUSB port … - Try a shorter HDMI cable … - Try on another monitor … - Try removing and plugging again
[11:08] <ubptgbot> <Javacookies> it's also possible that the issue is in your Nexus 5's port.
[11:11] <ubptgbot> <kavukr> @Javacookies [obligatory question, are you sure it's a slimport adapter and not MHL?], In description of buyer was list of devices but just brands and LG was there.
[11:11] <ubptgbot> <Javacookies> if you see LG then there's a high chance it is indeed slimport
[11:16] <ubptgbot> <kavukr> @Javacookies [- provide external power in the adapter's microUSB port … - Try a shorter HDMI cab …], With power adapter the same issue. HDMI  is very short but I try another later, just as a monitor. Plugging again don't work. Cable connevting with PC work fine, I  hope with device is all alright. Thanks
[11:28] <ubptgbot> paul_b_ranch was added by: paul_b_ranch
[11:28] <ubptgbot> <paul_b_ranch> where can i download the UT image to install through command line
[11:31] <ubptgbot> <paul_b_ranch> or can any one answer why when i use the installer on a Pixel 3a it reboot to boot loader but cant find fastboot device
[12:14] <ubptgbot> <FFokMC> (Photo, 684x1061) https://irc.ubports.com/Jlk804W0.png
[14:09] <ubptgbot> handsomeinked was added by: handsomeinked
[14:09] <ubptgbot> <Hailey Boucher> Fwd from Hailey: https://t.me/joinchat/S5-J_AR89Q7_L6mx
[14:14] <ubptgbot> m-Elgaz EZEL was added by: m-Elgaz EZEL
[14:14] <ubptgbot> <m-Elgaz EZEL> Hello
[14:15] <ubptgbot> <wayneoutthere> Welcome!
[16:21] <ubptgbot> Андрей was added by: Андрей
[17:11] <ubptgbot> <raff> Hello to all ! Happy New Year !!!
[17:17] <ubptgbot> <just_carlod> lol
[17:56] <ubptgbot> <Javacookies> too late for calendar new year and too early for Chinese new year 😄
[18:40] <ubptgbot> SovereignFreeman was added by: SovereignFreeman
[19:11] <ubptgbot> Ben Pittman was added by: Ben Pittman
[20:03] <ubptgbot> <SovereignFreeman> Does anyone know if it is possible to install ubuntu touch on a galaxy tab2 10.1 ?
[20:06] <ubptgbot> Enjie999 was added by: Enjie999
[20:09] <ubptgbot> <TotalSonic> @SovereignFreeman [Does anyone know if it is possible to install ubuntu touch on a galaxy tab2 10.1 …], at only 1gig of RAM and 8 years old this would perform poorly with UT even if you can get it to boot it.  If you wanted to try porting it anyway info is at http://docs.halium.org/en/latest/porting/first-steps.html … and … http://docs
[20:09] <ubptgbot> .ubports.com/en/latest/porting/Intro.html
[20:10] <ubptgbot> <TotalSonic> @SovereignFreeman [Does anyone know if it is possible to install ubuntu touch on a galaxy tab2 10.1 …], also - looks like it was stuck at Android 4, which would make it pretty impossible to port
[20:10] <ubptgbot> LiniLinux was added by: LiniLinux
[20:14] <ubptgbot> <LiniLinux> Have anyone the Galaxy S8 porting with UT?  UT running with halium only in S8 bootlogo. In /data/.../log/messages is no usably informations.
[20:23] <ubptgbot> <SovereignFreeman> @TotalSonic [also - looks like it was stuck at Android 4, which would make it pretty impossib …], Thanks for the speedy reply.  … I managed to install a google free android os called cyanogenmod, but that has forked into something else that does not support my device.
[20:26] <ubptgbot> <NotKit> @LiniLinux [Have anyone the Galaxy S8 porting with UT?  UT running with halium only in S8 bo …], join @Halium and @ubports_porting. I know Erfan could boot Galaxy S9, but no idea about S8
[20:30] <ubptgbot> <Stereofont> @just_carlod [Q&A is 7PM UTC?], A good idea for everyone to sign up to the News channel. Timings are always announced there. Announcement are few so you won't be swamped by messages
[20:30] <ubptgbot> <Stereofont> @ubports_news
[20:35] <ubptgbot> <LiniLinux> @NotKit [join @Halium and @ubports_porting. I know Erfan could boot Galaxy S9, but no ide …], Thx👍🏻
[21:09] <ubptgbot> <Nico van Strien> How long does it take to install Ubuntu touch?
[21:09] <ubptgbot> <PiecerEdd> with the installer? like, 10 minutes if your inernet connection's fast 😆
[21:10] <ubptgbot> <Steve Kueffer> @Nico van Strien [How long does it take to install Ubuntu touch?], About 15 min. But firsts steps must have been done before
[21:10] <ubptgbot> <Nico van Strien> Ah oké, it's taking long
[21:11] <ubptgbot> <Nico van Strien> Thanx for the reply
[21:23] <ubptgbot> <Nico van Strien> Think I broke it, I took the usb cable out while it was flashing
[21:29] <ubptgbot> <Nico van Strien> I wiped it now it's starting up android again😅
[21:31] <ubptgbot> <paul_b_ranch> or can any one answer why when i use the installer on a Pixel 3a it reboot to boot loader but cant find fastboot device
[21:31] <ubptgbot> <paul_b_ranch> [Edit] can any one answer why when i use the installer on a Pixel 3a it reboot to boot loader but cant find fastboot device
[21:32] <ubptgbot> Giulio Corbe was added by: Giulio Corbe
[21:33] <ubptgbot> <dohbee> @paul_b_ranch [can any one answer why when i use the installer on a Pixel 3a it reboot to boot …], can you run `fastboot devices` in the terminal when in this state and see the device?
[21:33] <ubptgbot> <dohbee> was OEM unlock enabled in Android developer settings page?
[21:33] <ubptgbot> <paul_b_ranch> No
[21:33] <ubptgbot> <paul_b_ranch> Yes
[21:34] <ubptgbot> <dohbee> are you sure you're at bootloader and not recovery?
[21:34] <ubptgbot> <paul_b_ranch> I also assume it doesn't need to to be rooted just unlocked
[21:35] <ubptgbot> <dohbee> yes, rooting is irrelevant
[21:35] <ubptgbot> <paul_b_ranch> I get to the fastboot menue the it either stops or conteniues to boot
[21:35] <ubptgbot> <dohbee> menu?
[21:35] <ubptgbot> <dohbee> for power off, reboot, boot to recovery, or continue booting?
[21:36] <ubptgbot> <paul_b_ranch> The fastboot screen where you can select reboot recovery or start
[21:36] <ubptgbot> <paul_b_ranch> I  know it's unlocked so that not the issue
[21:36] <ubptgbot> <paul_b_ranch> Yes that one
[21:38] <ubptgbot> <dohbee> ok, if `fastboot` tool won't see it, then the problem is either the cable, the USB port, or the phone itself
[21:38] <ubptgbot> <dohbee> are you doing this on linux?
[21:38] <ubptgbot> <paul_b_ranch> Yes ubuntu
[21:39] <ubptgbot> <paul_b_ranch> 20.04
[21:39] <ubptgbot> <dohbee> unplug the phone from your PC, and in a terminal run `tail -f /var/log/syslog` (may need sudo), and then plug your phone in while in fastboot mode. it should say something about a USB device being connected. if it doesn't, it's likely a hardware issue
[21:43] <ubptgbot> <paul_b_ranch> Is it possible the os version is wrong I'm using oldest Android 9 pixel 3a (witch is my phone) img but not the 9 xxxx.002 latest one
[21:44] <ubptgbot> <dohbee> the OS version is irrelevant if the device can't even be seen by the computer
[21:51] <ubptgbot> <Paul JL> @Carlod - Wow...that's WAY over my head! I've been looking at de-googled Nexus 5's on Ebay and they're pretty affordable. Would that be a better option?
[21:51] <ubptgbot> <paul_b_ranch> Certainly and easier one
[22:15] <ubptgbot> Raffles Administrator was added by: Raffles Administrator
[22:19] <ubptgbot> <Raffles Administrator> Greetings, I have a BQ Aquaris E5 Ubuntu edition with OTA-15 installed. (last updated 2/7/17). Is there a newer version and how do I install it? It says Software is up to date, but I can't believe this. Calculator for instance doesn't work.
[22:20] <ubptgbot> <Flohack> @Raffles Administrator [Greetings, I have a BQ Aquaris E5 Ubuntu edition with OTA-15 installed. (last up …], Hello where have you been the last 3 years 😆
[22:22] <ubptgbot> <Raffles Administrator> Good question, I am in a remote place (West Africa), the battery gave up and took me ages to get a new one, in addition to work and other commitments I would like to get it working again.
[22:23] <ubptgbot> <j2g2rp> @Raffles Administrator [Good question, I am in a remote place (West Africa), the battery gave up and too …], first you should install ubports installer on a pc
[22:23] <ubptgbot> <Raffles Administrator> I have Ubuntu on my desktop and laptops
[22:23] <ubptgbot> <j2g2rp> after this use the installer to flash the device to ubports
[22:24] <ubptgbot> <j2g2rp> you will find a lot of differences from 2017
[22:24] <ubptgbot> <Raffles Administrator> Okay thanks, I will try and report back. It might take a few days. Is there a link I can start at?
[22:25] <ubptgbot> <j2g2rp> @Raffles Administrator [Okay thanks, I will try and report back. It might take a few days. Is there a li …], a link for what?
[22:26] <ubptgbot> <Steve Kueffer> @Raffles Administrator [Okay thanks, I will try and report back. It might take a few days. Is there a li …], You will find the UBports Installer in the Ubuntu software center
[22:26] <ubptgbot> <j2g2rp> you can install ubports installer through snap repositories
[22:26] <ubptgbot> <j2g2rp> you can also download deb and appimage from ubports webpage
[22:27] <ubptgbot> <j2g2rp> https://ubuntu-touch.io/get-ubuntu-touch
[22:29] <ubptgbot> <Raffles Administrator> Thanks, I'm fairly Ubuntu-literate, I will give it a try and report back.
[22:36] <ubptgbot> <j2g2rp> 👍
[22:54] <ubptgbot> nico_nmi was added by: nico_nmi
[22:59] <ubptgbot> computerreasonable was added by: computerreasonable
[23:51] <ubptgbot> <computerreasonable> (Photo, 705x705) https://irc.ubports.com/DUxGaPAj.png