 Well. just tested today my first phonecall on my Samsung note 4. Can't hear the other side... So i guess i will reinstall UT, as it can only be bad installation , right? Or is there any other guesses?
 [Edit] Well. just tested today my first phonecall on my Samsung note 4. Can't hear the other side... Also the other side cant hear me, but tha phone rings and establishes call. So i guess i will reinstall UT, as it can only be bad installation , right? Or is there any other guesses?
 @Yo5eff [Well. just tested today my first phonecall on my Samsung note 4. Can't hear the …], This may be a specific problem related with the status of the port to that device, the complex network software stack, or the network provider you use. Or a combination of them
 hmm not sure on that
 @TronFortyTwo [This may be a specific problem related with the status of the port to that devic …], I'm thinking to reinstall again. After all, i'm not entirely sure about previous installation, as i ran into some issues before it was completed visually on computer.
 So, just to be sure i do not mess with it, i go to recovery mode, chose "Ubuntu mode" and i'm good to use UBports installer on computer?
 (Photo, 622x1280) https://irc.ubports.com/Ki8v6OxY.png
 (Photo, 1280x720) https://irc.ubports.com/0HWQJpa0.png
 That seems to be the only way i get UBports to recognize phone now...
 um ok should be fine i think
 Should i choose Stable, rc or devel? (imagine , stable)
 And Wipe user data...
 [Edit] And Wipe personal data...
[00:35] <ubptgbot> طِـأّلَـــﮯ أّنِتٌـظُأّريِّـــ ــ ـــﮯ was added by: طِـأّلَـــﮯ أّنِتٌـظُأّريِّـــ ــ ـــﮯ
 Now seems going better because i have already UB files in the computer - dont need to wait for download 😉
 Ok, Just flashed it again and it went really well till the end. What i saw is that now screen turns off after the time that was supposed to (an improvement vs previous situation) , but on phone call it continues the same . No sound from either side, even if call is completed
 Continues not to be detected by computer when is on 😔
 I have to say I'm not best pleased when I see individual developers, on several forums, scoff at notched phones and dismiss them as "fads/gimmicks". The paradigm is still going pretty strong, being used by several OEMs over the past few years, and a good fraction of users will be buying newer devices which do use the style.
 @LoneRanger4 [I've been using Linux exclusively on my personal machines for 14+ years, and the …], Wow … Thank you. … No one mentioned the Precision line to me before only the 76 one.
 I'm sure the community would hope that the developers would not only support but embrace atypical types of hardware, for example if the Nintendo 3DS family could somehow take a UT port, or those phone curiosities which have screens on both sides of their bodies, or even future innovations like holograph-projecting phones. With the e
[01:13] <ubptgbot> xception of paradigms which were near-universally expected to be actual gimmicks with little hope of ever becoming mainstream and therefore would be a bad investment of resources.
 Guys will Ubuntu touch work on a OnePlus 3t phone?
 And so I'd like to thank @NeoTheThird for giving thoughtful commentary on Github about how Ubuntu Touch may be best adapted to notched devices.
 @InvictusBoom [Guys will Ubuntu touch work on a OnePlus 3t phone?], Yeahj
 its in the installer
 [Edit] And so I'd like to thank @NeoTheThird for giving thoughtful commentary on Github about how Ubuntu Touch may be best adapted to notched devices. And the developer who made a patch for the Volla, shared and discussed here yesterday.
 @PhoenixLandPirate [Yeahj], I was only seeing support for the OnePlus 3. But not the 3t. Are you sure?
 (Photo, 800x636) https://irc.ubports.com/6e0yiYZE.png
 @PhoenixLandPirate [<reply to media>], So if the device is listed in the drop down menu that means it is supported?
[01:19] <ubptgbot> user2315 was added by: user2315
 @InvictusBoom [So if the device is listed in the drop down menu that means it is supported?], If you want to have a better idea of its status, you can check it out here https://devices.ubuntu-touch.io/ … Ubuntu touch has to work to a certain degree to get on the installer, but doesn't have to be perfect
 I guess i need another help here... … I'm trying now to install twrp recovery, but last time i did that was with odin on a windows laptop.  … Do i need some software to do it on Linux Ubuntu? "Googled" quite a bit already, but all the instructions i've found, didn't worked out... … So, do i need to put a computer working with windows to do
[02:02] <ubptgbot>  that, or is there a simple way?  … Wanna to install another rom to see if there is any hardware problem with sound. Unfortunately this note4 is not usable as it is now... 😞
 @TartanSpartan [I'm sure the community would hope that the developers would not only support but …], the thing is the notch is an "fad" in the sense that its an compromise made to get a higher screen to body ratio while an under-display camera is not viable. it creates a lot of challenges that won't be a challenges once the technology ma
[02:02] <ubptgbot> tures, and so many people hating the notch it has become a meme. on the other hand i agree that UT will inevitably be ported to notched phones, so some effort will have to be and is done to support it in the OS.
 Does ubuntu touch supports higher refresh rate higher than 60
 @Yo5eff [I guess i need another help here... … I'm trying now to install twrp recovery, but …], i would wait for the porter to reply actually, he should be in this group but i suppose he's asleep right now
 which note 4 did you have btw?
 It's the 910F (Samsung Note 4)
 is it this one? https://twrp.me/samsung/samsunggalaxynote4qualcomm.html
 @Fuseteam [is it this one? https://twrp.me/samsung/samsunggalaxynote4qualcomm.html], Yes, is that one. I already have the twrp image here
 i see some linux instructions there, tho not sure i recommend to do it
 [Edit] i see some linux instructions(the dd method) there, tho not sure i recommend to do it
 Porter is Tygerpro. I can wait a bit for sure, but i think i may be not the only user with that doubt , on "how to" go back to any other android roms, specially when using Linux. … No need to risk bricking the device
 well samsung is bit different appearently most case was "just" a "simple" fastboot command
 I'd love to have this phone as second phone with UT , and slowly make the transition to linux phones , but as it is now it is not usable as phone (no sound in calls)
 why i would recommend waiting on the porter is that there's a chance its a known bug and he may know a fix
 and if not he'll probably be able to help you better than me :p
 I guess i may need to get later on other phone that has better compatibility - perhaps a OPO or other like that... … I dont mind to trade some usability (or nevermind bugs) for all the extra privacy, but i'd like to have the basic working 😁
 @Fuseteam [and if not he'll probably be able to help you better than me :p], Sure, i'll wait for @Shakendo input on that situation.
 @Yo5eff [I guess i may need to get later on other phone that has better compatibility - p …], it should work is what i'm saying, but why it doesn't work i do not know :p
 @Yo5eff [I guess i may need to get later on other phone that has better compatibility - p …], [Edit] it should (be able to) work is what i'm saying, but why it doesn't work i do not know :p
 Probably it was some error form my side
 [Edit] Probably it was some error from my side
 @Yo5eff [I guess i need another help here... … I'm trying now to install twrp recovery, but …], Should be able to use heimdall
 oh hey one of the experts :p
 @Lyokanthrope [Should be able to use heimdall], do you happen to now about the call audio error on the trlte?
 @Lyokanthrope [Should be able to use heimdall], [Edit] do you happen to know about the call audio error on the trlte?
 @Lyokanthrope [Should be able to use heimdall], Found that one in odinforum before, but couldn't download it
 @Lyokanthrope [Should be able to use heimdall], [Edit] do you happen to know about the call audio issue mentioned above on the trlte?
 @Fuseteam [do you happen to know about the call audio issue mentioned above on the trlte?], It doesn't work on trlte at all as far as I know
 @Yo5eff [Found that one in odinforum before, but couldn't download it], Is it not in the Ubuntu repos?
 @Lyokanthrope [Should be able to use heimdall], [Edit] do you happen to know about the call audio issue  on the trlte mentioned above?
 hum... let me see
 @Fuseteam [the thing is the notch is an "fad" in the sense that its an compromise made to g …], I guess it's just a question of time then. Thanks for the insight.
 Do i go by the "Software store" or by command line? I'm still a bit "noob" on linux by command line... Usually i google all the needed steps to do stuff
 sudo apt install heimdall-flash 😊
 Is that one?
 @Lyokanthrope [Is it not in the Ubuntu repos?], Learning something new every day 😁
 @Yo5eff [sudo apt install heimdall-flash 😊], Should be I think. I'm at work so..
 Ok. Installed. Now i just need to figure out how to use it 😂
 heimdall flash --RECOVERY /path/to/twrp.img
 Here is "The Man" 🙂 … Thanks a lot, Tygerpro. … By the way, do you have any idea why call sound and micro may be not working on my note?
 Also found this that may be useful for other users: … https://glassechidna.com.au/heimdall/
 Seems to have a GUI, too 😁
 @Shakendo [heimdall flash --RECOVERY /path/to/twrp.img], I boot phone in recovery for it to work, right?
 @TartanSpartan [I guess it's just a question of time then. Thanks for the insight.], pretty much is yeah
 @Yo5eff [I boot phone in recovery for it to work, right?], download mode, so hold vol -, home,  and pwr while turning on
 Ok. It seemed to worked out... Now i have both twrp recovery and UT OS at same time 😂 … (it just changed the recovery mode) … Anything else i may need to know before try other rom?
 @Fuseteam [the thing is the notch is an "fad" in the sense that its an compromise made to g …], i wouldn't call it a "meme" and that term has become way overused, and generally points at unfavorable things. but notches create more difficulty for third party developers. and thus is why they comment on this frustration, particularly in commu
[03:50] <ubptgbot> nities where development is more transparent.
 Just installed an android rom, and calls work, so it wasn't hardware problem... 🤔 … Will wait for further news regarding to Note 4, and if a good opportunity appears, will get a phone more "UT friendly" 😊
 So do we have to accept that, "no data" and other hardware limitations in redmi note 7 will be present no matter what? or are they being worked on? I'm really waiting for a stable and frequently updated UBports version.
 @Yo5eff [Well. just tested today my first phonecall on my Samsung note 4. Can't hear the …], Hi, the audio phone call is a know issue of the port. I have the same.
 https://forums.ubports.com/topic/477/porting-to-samsung-galaxy-note-4-sm-n910p/106?lang=en-GB&page=6
 @Tchan74 [Hi, the audio phone call is a know issue of the port. I have the same.], My bad. Should have read that first. But anyway, this short experience made me want more an Ubuntu Touch phone 😁
[05:07] <ubptgbot> DPR was added by: DPR
[06:22] <ubptgbot> <أحد الإخوة> Help
[06:24] <ubptgbot> <أحد الإخوة> (Photo, 957x1280) https://irc.ubports.com/aYAJucSC.png 2 hours is that
[06:24] <ubptgbot> <أحد الإخوة> Aftr installed
[06:24] <ubptgbot> <أحد الإخوة> Nexus 6p
[06:25] <ubptgbot> <أحد الإخوة> Why he is dont go to ubuntu tuch
[06:41] <ubptgbot> Themetaleye was added by: Themetaleye
 @أحد الإخوة [Why he is dont go to ubuntu tuch], please do not cross post, most of the people who can help you will be all of the groups
 Hello, since there is an android layer. Is there anyway to know if the network scanning is persistent even in Ubuntu Touchz or do the kernel patch prevent it somehow?
 @أحد الإخوة [Why he is dont go to ubuntu tuch], Respect it, maybe it doesn t like it... 🤷‍♂
 @Themetaleye [Hello, since there is an android layer. Is there anyway to know if the network s …], what are you referring to with network scanning?
 IDK man but can t it be that the lock on the screen is telling you that maybe there is something wrong like unrooted or bootloader IDK
 @Shakendo [what are you referring to with network scanning?], No no, Network Scanning is disabled for sure since no android apps
 I mean yes sorry
 @أحد الإخوة [<reply to media>], if that lock is closed, then you need to unlock your bootloader before anything else will work
 @Shakendo [what are you referring to with network scanning?], Ehm, since there is the android telling shit to proprietary drives the device usually ping your location constantly pimging to all the wifi devices near you
 In amdroid is persistent, IDK how much Lineageos can be sure that is not happening and I want to know if Ubuntu can do something more about it from the kernel. Idk if it does make any sense😅
[06:47] <ubptgbot> <أحد الإخوة> @Shakendo [if that lock is closed, then you need to unlock your bootloader before anything …], if you see the look he is mean opended  … Not see the look = unlock
 @Themetaleye [Ehm, since there is the android telling shit to proprietary drives the device us …], the android layer is basically an abstraction layer so that UT can use the device hardware, think of it as a translator similar to how wine allows linux to run windows apps (in function, its quite different in form) the apps for android do
[06:50] <ubptgbot> not exist as there is no java for android
 @أحد الإخوة [if you see the look he is mean opended  … Not see the look = unlock], have you tried rebooting the device?
[06:50] <ubptgbot> <أحد الإخوة> @Shakendo [have you tried rebooting the device?], Yah
[06:51] <ubptgbot> <أحد الإخوة> Dont work
 ok, same screen?
 what is the environment your trying to install from? (i.e. Ubuntu 8.04)
[07:07] <ubptgbot> ccten1 was added by: ccten1
[07:10] <ubptgbot> <أحد الإخوة> @Shakendo [what is the environment your trying to install from? (i.e. Ubuntu 8.04)], Last day ubuntu 20.04  … Today mac os big sur
 @أحد الإخوة [Why he is dont go to ubuntu tuch], You need to use android 7.1.2 and you need to format data using TWRP. These are the two common reasons for this
[08:07] <ubptgbot> BANUSHAN was added by: BANUSHAN
 Gmh
 How does one install python3 pip on the pinephone ???  … Sudo  apt-get install python3-pip  … Doesn't work
[08:34] <ubptgbot> W45owAzocak was added by: W45owAzocak
 @WelcomePlayerOne [How does one install python3 pip on the pinephone ???  … Sudo  apt-get install p …], explain the error, that should be the right command.
 (Photo, 720x1280) https://irc.ubports.com/mf03fMSh.png
 Is this is a remount with rw  issue?
[08:41] <talmid> hello, I'm looking into installing UBPorts to Galaxy S6 did anyone try this before? I'm trying to figure it out based on the documentation how to do this
 @WelcomePlayerOne [Is this is a remount with rw  issue?], yep, if it's not that you may want to try an `apt update`; UT will normally default to read-only `/`
 Ok ty
 Is it safe to keep on rw mode
 Or revert when done?
 @WelcomePlayerOne [Is it safe to keep on rw mode], should be (from my experience in porting)
 ofc you can revert it back if you don't necessarily need it anymore :)
 Ty much appreciated
 Has anyone got Volla UT working mobile data in the UK?
[09:37] <ubptgbot> <Ali Pace> Wоw, аmаzіng!!! - https://bit.ly/3pH17p4 … Мusk рumр  сrypto!☄️🚀💥
 I left Telegram a while ago for several reasons then joined again (via Matrix bridge) for UBPorts... I dit not miss the SPAM :/ Is there a way I can filter them?
 @dohbee [i wouldn't call it a "meme" and that term has become way overused, and generally …], a "meme" is just a unit of information that gets transmitted like a gene, even in communities like Linus tech tips they say "dead to the notch" in a somewhat joking manner :3 but yeah it create more unnecessary difficulty
 @Oliv4945 [I left Telegram a while ago for several reasons then joined again (via Matrix br …], I don't think so … even Telegram can't stop them so I guess it's hard to do 😅
 @WelcomePlayerOne [Is it safe to keep on rw mode], keep in mind that changes made in rw mode that are not available in readonly mode will be overwritten on a full OTA update
 @arthurabdulin [Has anyone got Volla UT working mobile data in the UK?], Have you checked if APN is configured correctly?
 Nice!  … Checkk  https://bit.ly/3tgkDuG … Mmuskk pump crypto🚀🚀🚀
 bah humbug
 @Fuseteam [bah humbug], Nope, spam, not humbug.
 gears starts turning
 wait..........summons ddg
 interesting
 @dohbee [i wouldn't call it a "meme" and that term has become way overused, and generally …], FWIW as a mostly 'end user' notches are 'unfavorable' to me too, i know that doesn't help you guys as regardless of my single human opinion on the matter, there's loads of phones with them now and so its inevitable that if you continue to port
[12:27] <ubptgbot> to modern devices you're going to end up dealing with them 😔 i still can't wait for stupid notched screens to die though!
 i think rodney mean i shouldn't call the 'hate on notches' a "meme"
 fair
 your thing seemed to hint at people hating on notches are sometimes doing so because we know its a temporary solution to a problem that'll be fixed relatively quickly though... my hatred is a lot more simplistic, i just think its stupid to have lumps missing out my screen regardless of the reason
 yeah it is just a bad compromise but sadly soooo many models were made like that :/
 which indicates people did buy it
 yeah... when it was just iphones i was like 'well i guess those who hate it enough will just move to android' but nope of course everyone bought it so all the androids followed suit!
 also my  U key keeps missing, stoopid thing
 @NotKit [Have you checked if APN is configured correctly?], Yes, I did.  … The sim works on my other iPhone NAD Nexus 5 UT
 @NotKit [Have you checked if APN is configured correctly?], [Edit] Yes, I did.  … The sim works on my other iPhone and Nexus 5 UT
 @TotalSonic [The Volla Phone in the USA saga continues:  went to my local AT&T store where on …], just on a side note as I read through messages, APN settings would only matter for calls once we have VoLTE
 Hi there
 I have lost the wifi after I have installed anbox
 on nexus 5
 I do not know if it's related
 but it's related in time
 @NotKit [just on a side note as I read through messages, APN settings would only matter f …], att still has regular calls for a year
 @Grillon [Hi there], did you flash the boot image or something?
[14:16] <ubptgbot> <Steve Kueffer> @Grillon [I have lost the wifi after I have installed anbox], This is known to happen on Nexus 5 when you install the whole Anbox image. You have to start the installation following the 2nd green box here: https://docs.ubports.com/en/latest/userguide/dailyuse/anbox.html  Better would be to reinstall UT using UBports installer (witho
[14:16] <ubptgbot> ut wipe), and than restart Anbox installation starting with:  … adb shell # connect from your host computer to your UT device … sudo mount -o rw,remount / … sudo apt update … sudo apt install anbox-ubuntu-touch android-tools-adb … anbox-tool install … exit
[14:17] <ubptgbot> <Steve Kueffer> @Grillon [I have lost the wifi after I have installed anbox], [Edit] This is known to occur on Nexus 5 when you install the whole Anbox image. You have to start the installation following the 2nd green box here: https://docs.ubports.com/en/latest/userguide/dailyuse/anbox.html  Better would be to reinstall UT using UBports installer
[14:17] <ubptgbot> (without wipe), and than restart Anbox installation starting with:  … adb shell # connect from your host computer to your UT device … sudo mount -o rw,remount / … sudo apt update … sudo apt install anbox-ubuntu-touch android-tools-adb … anbox-tool install … exit
 actuallly on devel (and probably on rc) anbox is shipped on the device
 Uhhhh oneplus n10 port?
 uhhhhh have you checked out devices page @dommercb ?
 [Edit] uhhhhh have you checked out devices page @dommercb?
 @NotKit [just on a side note as I read through messages, APN settings would only matter f …], ok ,thanks
 @dommercb [Uhhhh oneplus n10 port?], I was working on that, but not ready for normal use yet
 It required Halium 10 which is a huge WIP
 @dommercb [Uhhhh oneplus n10 port?], [Edit] I'm working on that, but not ready for normal use yet
 [Edit] It requires Halium 10 which is a huge WIP
 I will dump time into it if you want
 @Fuseteam [uhhhhh have you checked out devices page @dommercb?], Yeah it's full of ancient relics and foss head bleh
 Unfortunately I'm not educated enough to port myself, but knowing I can help with a port is exciting.  If you ever need a hand ping me I'll help out if I can.
 @dommercb [Yeah it's full of ancient relics and foss head bleh], that's the official list mind you, what is not on the list is not supported yet
 also the fx tec pro is one there which is no older than 2019 iirc
[15:20] <ubptgbot> <By brian All rights reserved> @Soscat House [I recently grabbed a Pixel3a and have been testing on Bell Canada ... No program …], i flashed the pixel 3a with the ubports installer i dont get any mobile data how did you get yours workng
[15:48] <ubptgbot> Addicted2Android was added by: Addicted2Android
 Jesus
 @Fuseteam [did you flash the boot image or something?], Yes I did as defined in documentation
 @Steve Kueffer [This is known to occur on Nexus 5 when you install the whole Anbox image. You ha …], Yes it's probably the reasons thank you to both of you @Fuseteam Steve
[16:12] <ubptgbot> <Soscat House> @By brian All rights reserved [i flashed the pixel 3a with the ubports installer i dont get any mobile data how …], Works if I choose 3G ... and set the APN properly.  Bell Canada UMTS Frequency Bands: … B2 (1900 MHz) … B5 (850 MHz)
 Anyone here running UT on OnePlus 3t?
 @Fuseteam Steve wifi works after ubport reinstall without wipe and no data loss. is this message important: W: No sandbox user '_apt' on the system, can not drop privileges
 it's when I install anbox-tool
 and when I do adb devices on my device I see : emulator-5558   offline
 How can I put emulator-xxxx online?
 @Shakendo [the android layer is basically an abstraction layer so that UT can use the devic …], So even if I install UT on an android it will still be sending my location to the mothership?
[16:37] <ubptgbot> premshahapalak35 was added by: premshahapalak35
 For k20 pro
 @InvictusBoom [So even if I install UT on an android it will still be sending my location to th …], there are no google play services running on UT
 well if your that concerned about it, then get rid of anything with a processor in your house, UT respects your privacy, but it doesnt make you "disappear"
 actively scanning wifi all the time != actively uploading wifi MACs to google
 but no, i don't think wifi is actively being scanned wiwth UT
[17:12] <ubptgbot> ngstylle was added by: ngstylle
[17:32] <Shadowbird2468> hey, I just bought Oneplus 5 and I'm installing Ubuntu Touch to it, using this guide https://pad.ubports.com/p/HaliumHowToTestInstall I have made it far, but now I dont know how to (issue the last thing I copy pasted into terminal) https://pastebin.com/BQnKfHJB (also where do I add the parameter -i since I will be using ssh later on
 @Shadowbird2468 [hey, I just bought Oneplus 5 and I'm installing Ubuntu Touch to it, using this g …], I will answer you later
 @Shadowbird2468 [hey, I just bought Oneplus 5 and I'm installing Ubuntu Touch to it, using this g …], Oh well took a look, looks ok you just added more blanks than neede between parameters. Try to trim them
 @Shakendo [well if your that concerned about it, then get rid of anything with a processor …], Thank you
 @dohbee [there are no google play services running on UT], Great
 @dohbee [but no, i don't think wifi is actively being scanned wiwth UT], Good
[17:36] <Shadowbird2468> ok, thanks! where do I add the -i parameter exactly?
 UT isn't using wifi/bt MACs for location either
 @Grillon [Yes I did as defined in documentation], guess the docs need to be updated, you don't need to flash the kernel on the nexus 5
 @Grillon [@Fuseteam Steve wifi works after ubport reinstall without wipe and no data loss. …], no that message is not important
[17:39] <Shadowbird2468> -p ut -s -i  ? like that, just adding it with the others?
 @InvictusBoom [So even if I install UT on an android it will still be sending my location to th …], no it doesn't communicate with google at all
 @Fuseteam [no it doesn't communicate with google at all], Good. Thank you for your reply.
[17:44] <Shadowbird2468> ./halium-install-standalone.sh -p ut -s -i ubuntu-touch-android9-arm64.tar.gz system.img
[17:44] <Shadowbird2468> something still not working
[17:49] <Shadowbird2468> I'm not very advanced linux user, but should halium-install-standalone.sh and system.img be in the same folder that I am in? also I dont know if I have ubuntu-touch-android9-arm64.tar.gz anywhere
[17:51] <Shadowbird2468> shadowbird@shadowbird-GA-970A-UD3:~/Downloads/oneplus5$ ls
[17:51] <Shadowbird2468> cheeseburger                  platform-tools
[17:51] <Shadowbird2468> halium-install-standalone.sh  twrp-3.5.0_9-0-cheeseburger_dumpling.img
[17:53] <Shadowbird2468> I have followed step by step the guide, but I think at this point something is a bit off. I feel like I'm missing ubuntu-touch-android9-arm64.tar.gz and I should put all these files in the same folder, right?
 uh Shadowbird, are you trying to help with porting?
 i think they are trying to install on oneplus 5
 eh? with halium install?
 @dohbee [UT isn't using wifi/bt MACs for location either], sorry, what do you mean? in which cases does android use MAC address for location?
[18:04] <Shadowbird2468> im not sure if Im doing all the right stuff here. I started here https://forums.ubports.com/topic/5594/porting-call-for-testers wanting to install Ubuntu Touch on my Oneplus5. I founf the link from a post there that I have followed.. but maybe I was not suppose to..
 @ee [sorry, what do you mean? in which cases does android use MAC address for locatio …], i think there was mozilla project for that
 oh i see its a port in progress
 [Edit] oh i see ithe oneplus 5 is a port in progress
[18:06] <Shadowbird2468> yea
 is adb install the only way to install apk? because my anbox machine appear offline?
 uh the real question is why it is offline
 it shouldn't be offline :p
 @Fuseteam [uh the real question is why it is offline], Yes why, I would love to discover it 😅
 anbox works because preinstall programs as calculator works
 try rebooting your phone
 I did
 hmm weird
 maybe disable and re-enable anbox?
 Yes let's try (how?)
 uhh
 maybe `anbox-tool disable`
 and `anbox-tool enable`
 haha it works 😃 thank you
 how can I go back without home, menu and go back button?
[18:16] <ubptgbot> <Steve Kueffer> @Grillon [haha it works 😃 thank you], Than you can find all Android app here: https://apkcombo.com/
[18:17] <ubptgbot> <Steve Kueffer> @Grillon [haha it works 😃 thank you], [Edit] Than you can find all Android apps here: https://apkcombo.com/
 @Steve Kueffer [Than you can find all Android apps here: https://apkcombo.com/], thank you? can I also update android version? from 7 to 10?
[18:17] <ubptgbot> <Steve Kueffer> @Grillon [thank you? can I also update android version? from 7 to 10?], Not afaik
 @ee [sorry, what do you mean? in which cases does android use MAC address for locatio …], google has a location service for faster location locks and higher accuracy, based on tracking of wifi and bluetooth device locations
[18:18] <ubptgbot> <Steve Kueffer> Anbox is still very experimental and need further work to run really well.
[18:18] <ubptgbot> <Steve Kueffer> [Edit] Anbox is still very experimental and needs further work to run really well.
[18:30] <Shadowbird2468> I went back a bit to redo somethings taht could have gone wrong and I stoped wondering about the step: "Wipe cache and system.partition and format data partition to remove encryption" should I choose to wipe Cache, System, Data.. but how about Dalvik / ART Cache?
[18:36] <Shadowbird2468> would it be unwise to wipe it just in case?
[18:44] <Shadowbird2468> so after the wipe is done, do I reboot the system?
[18:45] <Shadowbird2468> the screen will just show logon [1+] and "powered by android"
[18:45] <Shadowbird2468> then the command should work?
[18:46] <Shadowbird2468> ./halium-install-standalone.sh -p ut -s -i ubuntu-touch-android9-arm64.tar.gz system.img
[18:53] <Shadowbird2468> can you explain what is suppose to happen here? the .sh should run and install stuff and the parameters are explained here already.. and ubuntu-touch-android9-arm64.tar.gz was something called root file system that I downloaded early on.. what is happening to it/with it now? and system.img is in different folder, is that a problem?
[18:54] <Shadowbird2468> also the .sh file was set to executable so that should be taken care of
 @Grillon [how can I go back without home, menu and go back button?], open issue hehehehe
 @Grillon [haha it works 😃 thank you], yay /o/
[20:19] <ubptgbot> bicchieredipetrolio was added by: bicchieredipetrolio
 @Fuseteam [open issue hehehehe], use swipe from left to right edge to bring up left bar pinned app favorites, or swipe farther right for App Drawer. Back button in Morph browser is in upper left corner.
 @Fuseteam [open issue hehehehe], [Edit] use swipe from left edge to right  to bring up left bar pinned app favorites, or swipe farther right for App Drawer. Swipe Right edge to left to see all open apps. lBack button in Morph browser is in upper left corner.
[21:08] <fretegi> good afternoon
 @TotalSonic [use swipe from left edge to right  to bring up left bar pinned app favorites, or …], uh we were talking about back in anbox apps xD
 at least i think we were 🤔
[21:12] <fretegi> hey there folks.  hoping to get this working on a note 8, am i pushing on a string here?
 oh hey fretegi
 the rule of thumb is if its not on devices.ubuntu-touch.io it has to be ported
 ports that have been started are listed at https://forums.ubports.com/category/33/porting
 while the guide to porting can be found at docs.ubports.com/porting
 @Fuseteam [uh we were talking about back in anbox apps xD], whoops! sorry - Telegram is supposed back for following ongoing threada
 @Fuseteam [uh we were talking about back in anbox apps xD], [Edit] whoops! sorry - Telegram is sometimes bad for following ongoing threada
 @Fuseteam [uh we were talking about back in anbox apps xD], [Edit] whoops! sorry - Telegram is sometimes bad for following ongoing threads
[21:33] <ubptgbot> GJoe_CE was added by: GJoe_CE
[21:38] <ubptgbot> <By brian All rights reserved> @arthurabdulin [Has anyone got Volla UT working mobile data in the UK?], Is mobile … Data not working on villa
[21:38] <ubptgbot> <By brian All rights reserved> Volla
 For USA - Mobile data with Volla working great for me on AT&T (receiving LTE) but not able to make phone calls with that carrier.  On T-mobile receiving only 2G mobile data but able to make and receive clear calss
 @TotalSonic [whoops! sorry - Telegram is sometimes bad for following ongoing threads], it is indeed xD
 Just shipped off a OnePlus 7 Pro to the UK for Caleb to port. If anywhere in here wants to help but doesn't port or code, donate a phone.
 @By brian All rights reserved [Is mobile … Data not working on villa], Hi Brian! In the UK on EE network mobile data does not work on Volla running UT. I have checked APN and tested SIM on an iPhone. I had to go back from UT to VollaOS and mobile data on the same sim works! @Flohack
 @By brian All rights reserved [Is mobile … Data not working on villa], [Edit] Hi Brian! In the UK on EE network mobile data does not work on Volla running UT. I have checked APN and tested SIM on an iPhone. I had to go back from UT to VollaOS and mobile data on the same sim works! @Flohack @nanu_c
 @By brian All rights reserved [Is mobile … Data not working on villa], [Edit] Hi Brian! In the UK on EE network mobile data does not work on Volla running UT. I have checked APN and tested SIM on an iPhone. I had to go back from UT to VollaOS and mobile data on the same sim works! @Flohack @nanu_c @dohbee
 @By brian All rights reserved [Is mobile … Data not working on villa], [Edit] Hi Brian! In the UK on EE network mobile data does not work on Volla running UT. I have checked APN and tested SIM on an iPhone. I had to go back from UT to VollaOS and mobile data on the same sim works! @Flohack @nanu_c @dohbee @UniversalSuperBox
 @By brian All rights reserved [Is mobile … Data not working on villa], [Edit] Hi Brian! In the UK on EE network mobile data does not work on Volla running UT. I have checked APN and tested SIM on an iPhone. I had to go back (reinstalled) from UT to VollaOS and mobile data on the same sim works! @Flohack @nanu_c @dohbee @UniversalSup
[21:51] <ubptgbot> erBox
 Hey Arthur according to https://github.com/HelloVolla/ubuntu-touch-beta-tests/wiki/High-level-epic-overview-for-Ubuntu-Touch-port it should work.
 And I see you already asked in the villa group, there are the developers :)
 @nanu_c [Hey Arthur according to https://github.com/HelloVolla/ubuntu-touch-beta-tests/wi …], I have spent 24 hours literally without a sleep trying to make it work. The network shows [L] for LTE next to the mobile strength signal. But Morph-Browser keep reporting "connection error"
 @arthurabdulin [Hi Brian! In the UK on EE network mobile data does not work on Volla running UT. …], I would love to speak to anyone in the UK who has Volla with UT with mobile data working.  … Please speak to me :)
 Can you use the terminal and `ping google.com` so it's not a morph problem?
[22:01] <ubptgbot> <By brian All rights reserved> @arthurabdulin [Hi Brian! In the UK on EE network mobile data does not work on Volla running UT. …], Oh dear not good had a similar issue with redmi note 7 no mobile data flashing through installer was looking at getting the volla phone as well will wait for updates until it’s fixed none are a daily driver and yet so
[22:01] <ubptgbot> close
 [Edit] Can you use the terminal and `ping google.com` so it's not a morph only problem?
 @Shadowbird2468 [can you explain what is suppose to happen here? the .sh should run and install s …], Please wait until I publish the final instructions ^^
 @By brian All rights reserved [Oh dear not good had a similar issue with redmi note 7 no mobile data flashing t …], Are you in the UK?
[22:03] <ubptgbot> <By brian All rights reserved> Yes
[22:03] <ubptgbot> <By brian All rights reserved> Redmi works on we if you use halium boot image
[22:03] <ubptgbot> <By brian All rights reserved> Ee
[22:04] <ubptgbot> <By brian All rights reserved> Everything works apart from Bluetooth even finger print scanner works
 @By brian All rights reserved [Yes], I would wait for someone to confirm that mobile data on Volla UT works in UK.
[22:06] <ubptgbot> <By brian All rights reserved> I will shame really as I love … The operating system and the … Freedom no data tracking
[22:07] <ubptgbot> <Steve Kueffer> @arthurabdulin [I have spent 24 hours literally without a sleep trying to make it work. The netw …], I don't come from UK at all (Switzerland). Here are given apn for Internet and mms: … Name: EE internet … APN: everywhere … Proxy: Not Required … Port: Not Required … Username: eesecure … Password: secure … Server: Not Required … MMS
[22:07] <ubptgbot> C: http://mms/ … MMS proxy: 149.254.201.135 … MMS port: 8080 … MCC: 234 … MNC: 30 … Authentication type: Not Required or just use the default value shown. … Note that you can try leaving username and password empty, sometimes (depending carrier requirements) it does create authentification issues.
 @Flohack [Please wait until I publish the final instructions ^^], he's on irc he may not be online right now
 @By brian All rights reserved [I will shame really as I love … The operating system and the … Freedom no data track …], I was super happy with my Volla running UT on WiFi. Battery life takes you through the day easily. The quality of phone phone built is superior. Quality of the screen is outstanding. The UT is flying-fast!
 @Steve Kueffer [I don't come from UK at all (Switzerland). Here are given apn for Internet and m …], Thanks Steve  I have tried these and many others but no avail. Sadly!
 @Fuseteam [he's on irc he may not be online right now], I know but what can I do ^^
 the forum post maybe xD
 he says he followed the forum post
 Yes but this was announcement only and "for people who know" links to images
 Somehow somebody else made a combination with another thread
 might not work ^^
 Or idk.
 People should wait for my official messages ^^
[22:14] <ubptgbot> <By brian All rights reserved> @arthurabdulin [Thanks Steve  I have tried these and many others but no avail. Sadly!], Me too
 @Flohack [People should wait for my official messages ^^], hahahaha yeah but people are impatient, who knows maybe he's a porter in the making xD
[22:16] <ubptgbot> <By brian All rights reserved> @arthurabdulin [I was super happy with my Volla running UT on WiFi. Battery life takes you throu …], Sounds great can’t wait till all these small issues are resolved lots of dedicated people here fixing these issues
 oh cool teleports is capable of showing pinned chats
 (Sticker, 512x512) https://irc.ubports.com/pymW0XRA.webp
 @By brian All rights reserved [Me too], Do you already have Volla UT on hands?
[22:21] <ubptgbot> <Steve Kueffer> It seems the Vollaphone on UT is unable to connect to internet using cellular data on a few carriers (USA, Canada, UK, etc...) and works like a charm on most others... It should work in Europe since all LTE bands are  generally supported. Some other users report that it works by deactivating 4g/LTE. https://forums.ubports.com/topic/
[22:21] <ubptgbot> 5636/lte-ubports-ota-15-and-vollaphone/4?_=1612298173307 … Hope that a patch will be shortly released...
 i mean its technically certified for europe
 not sure how the UK fits in their tho