| Teacup | the_og_spazzz: While I set this up, only thing I can recommend to try is maybe a different vnc server | 00:01 |
|---|---|---|
| GZA-Genius | . | 00:01 |
| the_og_spazzz | Teacup: I'm not sure I feel confident being able to set that up from scratch but I can look into it | 00:03 |
| relipse | Yes | 00:04 |
| GZA-Genius | leftyfb ok getting same error with lag enabled on switch end and rebooted system, if you sent any msg after i said let me reboot i didnt see because got dissconnected | 00:05 |
| GZA-Genius | what about host/dns settings that shouldnt becausing errors on this level would it? | 00:07 |
| === cjoke_ is now known as cjoke | ||
| leftyfb | GZA-Genius: I would honestly try without the bonded interfaces to start with. Keep it simple, work up from there | 00:09 |
| GZA-Genius | ok | 00:10 |
| GZA-Genius | let me lookup how to setup normal link in netplan and change config | 00:12 |
| Teacup | vino on a ubuntu 20.10 live image doesn't even seem to work with RealVNC by default | 00:13 |
| the_og_spazzz | Ok, well nice to know its not just me | 00:13 |
| Teacup | For me it just gives an encryption error | 00:14 |
| Teacup | 1 min | 00:14 |
| the_og_spazzz | There's a way to shut that off, I don't know if I did it and it just started working but my VNC warns me about lack of encryption when I connect | 00:14 |
| the_og_spazzz | Which, I am fine with, this all lives behind a firewall and if I happen to be off site i'll use a VPN to get in anyway | 00:15 |
| Teacup | I'd recommend a separate VNC server anyway | 00:15 |
| Teacup | Whatever ubuntu has on by default seems to be just a very basic barebones server | 00:15 |
| the_og_spazzz | That's really all I want anyway. If I could get a feature set akin to RDP that would be GREAT but isn't needed | 00:15 |
| GZA-Genius | leftyfb SHOULD I REBOOT AFTER CHANGIN CONFIG OR JUST DO THE APPLY | 00:16 |
| GZA-Genius | sorry for caps | 00:16 |
| the_og_spazzz | Do you have any recommendations? Pref one with guides, screenshots, and commands? :-P | 00:16 |
| leftyfb | GZA-Genius: netplan apply should be sufficient | 00:16 |
| the_og_spazzz | I know enough Linux to follow directions, understand what I'm reading, and operate the machine but not so good figuring out things on my own | 00:17 |
| Teacup | Well if you want simple I'm pretty sure RealVNC has their own vnc server in the ubuntu repos | 00:18 |
| GZA-Genius | leftyfb ok i got it back up with a single fiber link with dhcp | 00:18 |
| Teacup | Or maybe that's just their viewer | 00:18 |
| the_og_spazzz | Teacup: I mean. I don't mind complex if it doesn't require me to make a ton of config changes and spend a few hours in google to make work. | 00:19 |
| Teacup | Regardless, you could also install it from their website | 00:19 |
| GZA-Genius | leftyfb PROGRESS!!! now let me try redoing the config with the syntax from the website with bond, i just dont understand how the config file could be fine then not be strange, let me rewrite config bond file see if we still have same error | 00:20 |
| the_og_spazzz | Alrighty, I'll do some research and see if if anything stands out. I appreciate your help and looking at it | 00:20 |
| Teacup | the_og_spazzz: You can download the RealVNC server here https://www.realvnc.com/en/connect/download/vnc/linux/ | 00:20 |
| Teacup | tigervnc is another option, but it would be a little more involved for you than their GUI | 00:21 |
| the_og_spazzz | Teacup: I'll start with that and see how I do then. Thank you again! | 00:22 |
| the_og_spazzz | Appreciate the help getting pointed in a direction :-) | 00:22 |
| GZA-Genius | leftyfb version: 2 was at the bottom of the config and renderer: networkd was not even in the old config, let me rewrite and see what happens | 00:22 |
| Teacup | You will of course want to toggle the "screen sharing" in ubuntu before installing that | 00:22 |
| the_og_spazzz | Right... I imagine it would conflict | 00:22 |
| the_og_spazzz | Any harm in uninstalling the other server you think? | 00:23 |
| the_og_spazzz | So long as it dosen't try to ripout the desktop with it? | 00:23 |
| the_og_spazzz | Did that once. It was fun LOL | 00:23 |
| GZA-Genius | leftyfb here is a question i was running my lag as 802.3ad lacp rate slow and hashpolicy layer3+4, i pretty much just want max speed is that the mode i should be using? | 00:26 |
| leftyfb | GZA-Genius: sorry, I don't have experience with that. Again, why do you need this bonded interface? | 00:26 |
| GZA-Genius | leftyfb i really shouldnt need redundancy or load balance because its a home server | 00:27 |
| GZA-Genius | leftyfb just becauyse i can and i have all the equipment and its always what i have used | 00:27 |
| GZA-Genius | its 2x 10G links | 00:27 |
| murpheux | I suddenly noticed my ubuntu server now had a desktop manager. What may be wrong? | 00:28 |
| leftyfb | jeeze, what on earth are you transferring to/from that server to require that type of speed? Also, the other end needs similar specs to take advantage of it | 00:28 |
| matsaman | murpheux: you installed something desktopy | 00:28 |
| GZA-Genius | yup | 00:28 |
| leftyfb | murpheux: desktop managers do not get installed on servers on their own | 00:29 |
| murpheux | and I cannot remember ever adding a desktop manager to it | 00:29 |
| murpheux | leftyfb: must be the devil at work I guess | 00:29 |
| murpheux | matsaman: that may be more like it | 00:30 |
| GZA-Genius | leftyfb my desktop and server have both 10g x2 lag links i often xfer 100s of gig back and forth and i have 10g lan in my whole house buy only a few devives that run at full speed | 00:30 |
| murpheux | may be a package I installed brough it in | 00:30 |
| murpheux | GZA-Genius: that rocks!! - 10g x2 lag links | 00:31 |
| Teacup | the_og_spazzz: You can just leave the existing server alone(off, of course); It shouldn't cause any issues | 00:32 |
| GZA-Genius | leftyfb its a huge dif in speed compared to 1G lags i have a 8drive sas raid inb server and pcie4 ssd in workstation so 1G easily bottlenecks that connection when transfering that amount of data, and i have it so may as well use it, ok let me try and rebuild bond | 00:32 |
| the_og_spazzz | @Teacup: Sounds like a plan. Thank you again! If your still around i'll report back (or have more questions) | 00:33 |
| matsaman | murpheux: I'm not sure the Debian way to "enforce" this not happening | 00:41 |
| matsaman | I'm sure you can blacklist certain packages | 00:41 |
| GZA-Genius | leftyfb i think i may have got it my old config for bond syntax was very dif just very confused how it worked fine then it didnt. I am rebooting now to check if it works | 00:45 |
| leftyfb | GZA-Genius: please do not pm | 00:50 |
| leftyfb | GZA-Genius: glad you got it working | 00:50 |
| the_og_spazzz | Teacup: The RealVNC Server app works. I'm not happy about the way they tie it in to the company itself (I view remote access as something that should be baked in the OS) but it will probably do the job until Ubuntu figures out why the baked in server isn't working | 02:24 |
| the_og_spazzz | and now that I know thats the issue, I might fiddle around with a more OpenSource VNC solution later thats not so tied into a 3rd party | 02:25 |
| the_og_spazzz | Appreciate the help again! | 02:25 |
| nyxyn | How does one discover new apt packages? Packages that I don't even know exist. Apt search seems pretty limited. | 02:29 |
| padan | not sure if there is an official pi chan, but wondering if there is a standard way to enable jumbo frames on the pi4 running ubuntu? i see that plenty of folks out there are patching kernels to do it, but i'd rather continue to be able to apt update/upgrade on a regular basis | 02:42 |
| nyxyn | try #raspberrypi | 02:44 |
| padan | thx | 02:44 |
| === zbenjamin_ is now known as zbenjamin | ||
| kevr | When I have an ssl certificate in /usr/share/ca-certificates/... and i use `dpkg-reconfigure ca-certificates`, it allows me to add that certificate to ca-certificates. But what if I update that certificate? Will running `dpkg-reconfigure ca-certificates` update ca-certificate's copy of it? | 02:54 |
| kevr | nothing shows anything being updated when i do | 02:54 |
| kevr | at least, not on stdout | 02:55 |
| sarnold | kevr: the /usr/share/doc/ca-certificates/README.Debian file gives me the impression a --fresh option may help | 02:57 |
| kevr | ty! | 02:59 |
| RoseBus | what's the task monitor app again? | 03:05 |
| sarnold | top? htop? | 03:06 |
| RoseBus | nvm | 03:06 |
| the_og_spazzz | @nyxyn: I like using Synaptic Package Manager to browse. | 03:06 |
| DarkTrick_ | **Q**: Where do I find my xorg.conf file? (This site: http://manpages.ubuntu.com/manpages/focal/man5/xorg.conf.5.html shows places where it's not | 03:52 |
| oerheks | DarkTrick_, standard there is not. | 03:54 |
| oerheks | !xorg | 03:55 |
| ubottu | X.Org is an implementation of the X Windows System, and is the part of your system that's responsible for graphical output. To restart it on an Ubuntu system, type 'sudo service lightdm restart'. To fix screen resolution or other X.Org problems: https://wiki.ubuntu.com/X/Config/Resolution . See also !xorgconf | 03:55 |
| oerheks | !xorgconf | 03:55 |
| ubottu | The /etc/X11/xorg.conf file is deprecated, but sometimes may still be needed to pass values to specific drivers. See `man xorg.conf` for file structure and syntax. For Ubuntu-specific documentation and more information, see also https://wiki.ubuntu.com/X/Config | 03:55 |
| DarkTrick_ | oerheks, I'm following the advice here: https://wiki.ubuntu.com/X/Troubleshooting/Freeze#Problem:__Freeze_began_after_a_system_update to set `Option "DPMS" "Off"` in `xorg.conf` | 03:56 |
| oerheks | oke, write your own and put it in /usr/share/X11/xorg.conf.d/ folder | 03:56 |
| Bashing-om | DarkTrick_: check the files in /usr/share/X11/xorg.conf.d/ . | 03:56 |
| oerheks | that is the new way to override any auto configured setting | 03:56 |
| DarkTrick_ | hm... using xorg.conf looks error prone | 04:00 |
| === DarkTrick_ is now known as DarkTrick | ||
| DarkTrick | oerheks, Bashing-om, Thank you for your help! | 04:04 |
| oerheks | have fun! | 04:04 |
| Bashing-om | DarkTrick: :D Help is what we do . | 04:06 |
| quartz12 | Hi all. I'm running Kubuntu 20.10. When my computer goes to sleep/stand-by, it won't wake up. The screen looks like it's going to wake up, but it never does. It says "No input detected" and I'm forced to restart the system. I have an Nvidia card, running the 460 drivers proprietary drivers, 5.8.0-43-generic kernel. Not sure what to do. | 04:14 |
| sarnold | can you ssh in to the system and see it working otherwise? | 04:18 |
| kk4ewt | or control-alt-f4 | 04:19 |
| kk4ewt | swap same size a ram? | 04:20 |
| kk4ewt | you are sure its going to sleep and not hybernate > | 04:20 |
| quartz12 | kk4ewt: I haven't tried ctrl-alt-f4 | 04:23 |
| quartz12 | sarnold: What do you mean by "ssh" | 04:23 |
| sarnold | quartz12: it's an easy way to use a remote computer | 04:23 |
| kk4ewt | sarnold, which may be disabled by default on lots of linux distros | 04:24 |
| quartz12 | kk4ewt: Not sur ehow to check if it's going to sleep or hibernate | 04:24 |
| sarnold | kk4ewt: yes, and I think the server isn't enabled by default on ubuntu, either, but it's so useful a lot of people install it first thing :) | 04:24 |
| kk4ewt | quartz12, check your powersaving settings | 04:25 |
| quartz12 | Hmm, weird, the screen is set to shut off, but nothing else. suspend session is not checked. | 04:27 |
| === matsaman_ is now known as matsaman | ||
| === jeddo- is now known as jeddo | ||
| === hosea61_ is now known as hosea61 | ||
| unixbsd | do you know any alternative for a large server, to " Microsoft Exchange Server 2013 " ? | 06:12 |
| matsaman | unixbsd: honestly | 06:16 |
| matsaman | I don't know why anybody bothers with email servers anymore | 06:16 |
| matsaman | but you should definitely avoid exchange and active directory, like the plague | 06:17 |
| bsmith093 | hello | 06:27 |
| matsaman | hi b | 06:32 |
| === ace_me^^ is now known as ace_me | ||
| === bluesceada_ is now known as bluesceada | ||
| kevr | . | 08:33 |
| Voxel | Hey all :) | 08:49 |
| Voxel | https://paste.ee/p/SWopG#A2fcMBM6GKxonceRfmxN1MGQ2CJL7eWy | 08:49 |
| Voxel | May anyone tell what might an issue? | 08:49 |
| Voxel | Also: https://paste.ee/p/rkVHb | 08:50 |
| Voxel | I'm trying to run steam, but it gives these freaking error. I've already tried multiple things and would appreciate any suggestions ^^ | 08:51 |
| Voxel | python3-apt is already installed | 08:51 |
| guiverc | Voxel, Mint is neither Ubuntu, nor flavor of Ubuntu, thus off-topic here | 09:08 |
| guiverc | !mint | 09:09 |
| ubottu | The Ubuntu channels can only provide support for Ubuntu and its official flavors, since other distributions and derivatives have repository and software changes. So please use their dedicated support venues, for example: Linux Mint (#linuxmint-help on irc.spotchat.org), Kali Linux (#kali-linux), and LXLE (#lxle) | 09:09 |
| Voxel | I see. I uninstalled the Mint. | 09:09 |
| === denningsrogue8 is now known as denningsrogue | ||
| mat_cz | hi all! | 10:03 |
| mat_cz | is it possible to install xinit without gnome stuff for minimal dvtm ubuntu? | 10:04 |
| guiverc | mat_cz, I can't see why not; https://packages.ubuntu.com/groovy/xinit https://packages.ubuntu.com/groovy/dvtm | 10:12 |
| wagner-k | :wave: | 10:23 |
| wagner-k | ping | 10:28 |
| kevr | o.o | 10:32 |
| === rydare is now known as rdr | ||
| jas02 | Hello guys. I am thinking about possibility to use Ubuntu Core and LXD on top of it. Is it good fit? Purpose of this solution is to have (mostly immutable) base OS with minimal overhead and LXD cluster on top of it. | 10:35 |
| jas02 | Is it good git? Any production examples/experiences? | 10:35 |
| deki_01 | Hi all! | 10:39 |
| deki_01 | I have a mount on /name and it shows allmost 100% full inode just 1%, I delated all logs and still 98% can't find any hidden files, How can I find the files which use the space | 10:43 |
| Underknowledge | ping? | 10:45 |
| Underknowledge | Hi! probably poweruser question is /etc/init depriated in sime way since fossa? I try to follow https://ask.openstack.org/en/question/102912/manually-created-image-console-never-appears/ but no success so far /etc/init does not exist so maybe thats the issue I face now | 10:46 |
| wagner-k | ping | 10:51 |
| === PowerTower_121 is now known as PowerTower_120 | ||
| tomreyn | !ask | wagner-k | 11:01 |
| ubottu | wagner-k: Please don't ask to ask a question, simply ask the question (all on ONE line and in the channel, so that others can read and follow it easily). If anyone knows the answer they will most likely reply. :-) See also !patience | 11:01 |
| tomreyn | Underknowledge: deprecated / outdated, use systemd instead | 11:02 |
| wagner-k | Oh sorry, I just try to configure my IRC client, the rambox freenode app is insufficient. To less of catting here to see if the client works. | 11:03 |
| tomreyn | wagner-k: /join #tests | 11:04 |
| frad | is there any pp to convert .ape to .flac? | 11:07 |
| frad | app I mean | 11:07 |
| Underknowledge | ffmpeg probably | 11:07 |
| tomreyn | what is .app? | 11:07 |
| frad | apple I guess | 11:08 |
| tomreyn | run "file" against it | 11:08 |
| tomreyn | deki_01: see "Listing inodes on a Fileystem" at https://pc-freak.net/blog/find-filesystem-directory-eating-filesystem-inodes-linux/ | 11:08 |
| frad | tomreyn, what's the syntaxis: 'file .ape' returns .ape: cannot open `.ape' (No such file or directory), same for .odt | 11:11 |
| tomreyn | "man file" would tell you the syntax if you have package "man-db" installed. even without that, file --help may also work | 11:12 |
| Underknowledge | install the app tldr and then run 'tldr file' | 11:12 |
| Underknowledge | sudo apt-get install -y tldr; tldr file | 11:12 |
| Underknowledge | or run man file | 11:13 |
| rory | frad, apt install soundconverter - it's a GUI. Very simple and nice. | 11:13 |
| tomreyn | https://fileinfo.com/extension/app | 11:15 |
| Underknowledge | shouldnt that be .ape | 11:15 |
| frad | I used app as 'application' | 11:16 |
| frad | format i ape | 11:16 |
| frad | oh | 11:16 |
| frad | see what you did | 11:16 |
| frad | thanks rory | 11:18 |
| === vlm_ is now known as vlm | ||
| hansh | the manpage at http://manpages.ubuntu.com/manpages/trusty/man1/chromium-browser.1.html is missing several options, eg --no-sandbox and --disable-gpu | 11:22 |
| hansh | and --headless | 11:23 |
| === vlm_ is now known as vlm | ||
| === vlm_ is now known as vlm | ||
| deki_01 | tomreyn: thanks for the link it works!! | 11:46 |
| === vlm_ is now known as vlm | ||
| === Kel_ is now known as Kel | ||
| kyonsalt | AMD released the graphic driver for ubuntu20.04, yes, I got it, but the driver deb can't dpkg -i on 20.10? | 12:41 |
| === pauljw_20 is now known as pauljw | ||
| ash123 | hi! Anyone knows how to resolve this 'pci 0000:00:00.2: AMD-Vi: Unable to read/write to IOMMU perf counter.' | 12:50 |
| ash123 | i am looking for right kernel parameters for my laptop with amd processors. Currently i am using "GRUB_CMDLINE_LINUX_DEFAULT="quiet splash idle=nomwait pci=noaer iommu=pt ivrs_ioapic[4]=00:14.0 ivrs_ioapic[5]=00:00.2 rcu_nocbs=0-7 processor.max_cstate=1" | 12:51 |
| ash123 | but my laptop still freezes | 12:51 |
| ash123 | i am ready to pay to whoever solves the issues on my laptop with ubuntu 20.04. | 12:58 |
| kyonsalt | ash123, amd_iommu=on? | 13:02 |
| hwpplayer1 | Hi People! | 13:07 |
| ash123 | kyonsalt. do you mean i should try with iommu=on? | 13:07 |
| kyonsalt | amd_iommu=on | 13:08 |
| ash123 | ok...let me try that | 13:09 |
| ash123 | thanks! | 13:09 |
| BluesKaj | Howdy folks | 14:04 |
| longshanks | yesterday I could connect to my bluetooh device using Connection slider in settings to connect to my device. Today it doesn't work and no errors messages. Is there a cli way to invoke the same action and get some logs? Or can anyone tell me where to find the logs? The only thing I did between yesterday and today was install tpl, so maybe that's interfering some how ? | 14:23 |
| zetheroo | Is there a command to generate a new netplan config based on the available network interfaces and default Ubuntu networking settings? | 14:25 |
| TJ- | longshanks: "bluetooctl" then "devices" and "connect <MAC-address-of-device>" (tab will complete MAC addresses) | 14:26 |
| TJ- | longshanks: "bluetoothctl" even! | 14:26 |
| longshanks | TJ-: thanks I'll try | 14:28 |
| longshanks | Ah. Just says Failed to connect: org.bluez.Error.Failed | 14:29 |
| longshanks | tlp is probably more hassle than it's worth for a bit of extra battery | 14:37 |
| TJ- | longshanks: try "sudo systemctl restart bluetooth" | 14:39 |
| longshanks | I did turn bluetooth on and off again (classic IT fix!) using the Gnome applet. Does that do the same? Have also rebooted. Think tlp disables bluetooth, and now it won't connect. Think there's a page in their FAQ about how to disable the bluetooth disabling (i.e. leave it alone). Something to do with some bluetooth chips not handling suspend well, and guess tlp uses that feature to keep battery life | 14:41 |
| longshanks | long. | 14:42 |
| longshanks | So even if I turn bluetooth ON, which it now is, I cannot connect either using the Gnome applet nor the command you gave me | 14:42 |
| === Tabstar is now known as Tabmow | ||
| === LabMonkey is now known as Mechanismus | ||
| === vlm_ is now known as vlm | ||
| === vlm_ is now known as vlm | ||
| unixbsd | Hello, I try to get microsoft teams to workâk, But I get no microphone to work. it seems that ms teams is not compatib or working with pulseaudio. herewith my version of ms team: https://packages.microsoft.com/repos/ms-teams/pool/main/t/teams/teams_1.3.00.16851_amd64.deb | 15:47 |
| unixbsd | I use kde and pulseaudio, but microsoft teams does not want to use the microphone that is given into pulseaudio. | 15:48 |
| TR1950X | hi. in the path /etc/php/7.4/apache2/conf.d. conf filed start with a number. What does that number mean? | 15:49 |
| Sayantan | I had installed ubuntu 20.04 but while booting black screen appears whish says: | 15:54 |
| Sayantan | skl_hda_dsp_generic skl_hda_dsp_generic: Asoc: failed to init link iDisp1: -517 | 15:54 |
| Sayantan | and this error is continuing and it wont open the graphical user interface. | 15:54 |
| Sayantan | Can someone help? | 15:54 |
| omnidapps | Does anyone here know if the chipset for the Lenovo x1 carbon gen 8 that doesn't come with Linux preinstalled differs from the one that does? | 16:16 |
| ioria | Sayantan, what's your graphic card ? | 16:23 |
| Sayantan | Nvidia MX350 | 16:24 |
| ioria | Sayantan, you can start using the 'nomodeset' kernel parameter; you know it ? | 16:25 |
| Sayantan | Actually..no | 16:25 |
| ioria | !nomodeset | 16:25 |
| ubottu | Systems with certain graphics chipsets may not boot properly out of the box. "Temporarily Add a Kernel Boot Parameter for Testing" as discussed at https://wiki.ubuntu.com/Kernel/KernelBootParameters to add the "nomodeset" parameter there. | 16:25 |
| ioria | Sayantan, https://www.dell.com/support/article/it/it/itbsdt1/sln306327/manual-nomodeset-kernal-boot-line-option-for-linux-booting?lang=en | 16:25 |
| Sayantan | okay, I'll try that and thanks for the assistance. | 16:27 |
| ioria | Sayantan, no problem | 16:27 |
| === jadax7 is now known as jadax | ||
| === de-facto_ is now known as de-facto | ||
| === Linkandzelda_ is now known as LaZ | ||
| === markus_e92_ is now known as markus_e92 | ||
| === mnepton is now known as mneptok | ||
| === benfrancis2 is now known as benfrancis | ||
| === Ruud9 is now known as Ruud | ||
| === isolier2 is now known as isolier | ||
| === blackest_mamba_ is now known as blackest_mamba | ||
| === grimple_ is now known as grimple | ||
| === ravustaj1 is now known as ravustaja | ||
| === dvdmuckle_ is now known as dvdmuckle | ||
| === LaZ is now known as Linkandzelda | ||
| === jcnmark6_ is now known as jcnmark6 | ||
| === SysGh_st is now known as SysGhost | ||
| s8548a_ | hi | 17:39 |
| s8548a_ | i am trying to install Ubuntu 20.04 on virtualbox in a Win10 machine | 17:40 |
| s8548a_ | its done successfully but facing issue to install the guest additions | 17:40 |
| s8548a_ | when sudo apt install build-essential dkms linux-headers-$(uname -r) command is given, | 17:41 |
| s8548a_ | getting an error E: failed to fetch gcc-9/g++-9.....- Hash Sum mismatch | 17:43 |
| s8548a_ | what does this mean and how to install the build essentials? | 17:43 |
| rory | s8548a_, try re-running "apt update" first | 17:45 |
| s8548a_ | yes, software update and apt update has been done | 17:46 |
| s8548a_ | still the same error | 17:46 |
| leftyfb | s8548a_: https://linuxconfig.org/virtualbox-install-guest-additions-on-ubuntu-20-04-lts-focal-fossa | 17:47 |
| leftyfb | s8548a_: you do not need to build from source | 17:47 |
| s8548a_ | ok | 17:48 |
| s8548a_ | 1 moment pls, let me try | 17:49 |
| s8548a_ | leftyfb: first command: multiverse distribution component is already enabled for all sources | 17:55 |
| leftyfb | ok, then continue on | 17:55 |
| s8548a_ | second command same error like some hash mismatches and failed to fetch some repos | 17:55 |
| === xissburg_ is now known as xissburg | ||
| s8548a_ | leftyfb: second command same error like some hash mismatches and failed to fetch some repos | 17:59 |
| leftyfb | s8548a_: please pastebin the full error messages | 17:59 |
| leftyfb | s8548a_: paste.ubuntu.com for instance | 17:59 |
| jordanh0pe | hello | 18:05 |
| s8548a_ | leftyfb: https://paste.ubuntu.com/p/xhjjqjzcht/ | 18:06 |
| === multi8_ is now known as multi8 | ||
| metbsd | how do i remove all gui | 18:13 |
| metbsd | including xorg and xfce4 | 18:13 |
| metbsd | everything xubuntu has | 18:13 |
| s8548a_ | leftyfb: what went wrong? | 18:13 |
| leftyfb | s8548a_: you probably need to change your repo's. Apparently in.archive.ubuntu.com is broken | 18:13 |
| leftyfb | metbsd: why? Why didn't you just install the server edition of ubuntu? | 18:14 |
| metbsd | i did install server lts | 18:14 |
| metbsd | and then i for somereason use tasksel to install xubuntu | 18:14 |
| metbsd | now i regret and wanna remove xubuntu out from server | 18:15 |
| s8548a_ | leftyfb: any document link how to change the repo? | 18:16 |
| metbsd | do you know how to do that? | 18:16 |
| metbsd | reset the server | 18:16 |
| leftyfb | s8548a_: sudo sed -i 's/in.archive.ubuntu.com/us.archive.ubuntu.com/g /etc/apt/sources.list ; sudo apt update | 18:17 |
| leftyfb | metbsd: try http://www.vassox.com/linux-general/ubuntu/removing-gui-from-ubuntu/ | 18:19 |
| leftyfb | metbsd: or https://askubuntu.com/a/92089/1151311 | 18:19 |
| conr | any one know a tutorial for setting up Virt manager on Ubuntu or Debian and running a PCI passthrough via OVMF? | 18:21 |
| === Fuchs- is now known as Fuchs | ||
| s8548a_ | leftyfb: that command executed successfully, but the repos are still points to in.archive.ubuntu.com | 18:25 |
| s8548a_ | and throws saem error | 18:26 |
| s8548a_ | *same | 18:26 |
| leftyfb | s8548a_: use sudo to edit /etc/apt/sources.list | 18:26 |
| leftyfb | s8548a_: you can also use the gui | 18:27 |
| s8548a_ | ok, will try that in the morning. | 18:27 |
| s8548a_ | leftyfb: thank you so much for your time and help :) | 18:28 |
| metbsd | leftyfb, too much hassle. i think i'll reinstall. do you know a text based installer? | 19:04 |
| metbsd | 20 lts | 19:06 |
| metbsd | why is even server iso a live cd, not text installer | 19:08 |
| metbsd | a server needs a graphics card? | 19:08 |
| gordonjc1 | metbsd: you've got the choice to use a text installer or graphical installer | 19:12 |
| metbsd | how | 19:12 |
| metbsd | when i boot, there's nothing on screen | 19:13 |
| gordonjc1 | with the boot menu | 19:13 |
| === gordonjc1 is now known as gordonjcp | ||
| oerheks | server does not give a text installer? | 19:19 |
| oerheks | weird, here it does, for years.,.. | 19:19 |
| metbsd | i can't even get to boot menu | 19:27 |
| Maik | metbsd: get the mini.iso? | 19:29 |
| oerheks | .. it sounds it worked before.. | 19:29 |
| === ra1stlin6 is now known as ra1stlin | ||
| Maik | metbsd: http://archive.ubuntu.com/ubuntu/dists/focal/main/installer-amd64/current/legacy-images/netboot/ | 19:33 |
| === ||shark|| is now known as |shark| | ||
| rubick | why does ubuntu omit pam_faillock library from libpam-modules? I've found pam_tally2 to be depricated and unusable | 20:28 |
| metbsd | so what is ubuntu server better than debian as server | 20:32 |
| Maik | !discuss | metbsd | 20:37 |
| ubottu | metbsd: Want to talk about Ubuntu, but don't have a support question? /join #ubuntu-discuss for non-support Ubuntu discussion, or try #ubuntu-offtopic for general chat. Thanks! | 20:37 |
| mat_cz | hi all | 20:57 |
| Swift110-mobile | hello all | 21:23 |
| sarnold | hey | 21:23 |
| Nitrousoxide | Hey, I just installed Ubuntu Desktop 20.04 alongside Windows 10 on a BIOS system. The problem is that when I boot I immediately get thrown into Windows without the Grub loader showing up. Does anyone know of a fix for this, or should I ask ##windows? | 22:51 |
| sarnold | Nitrousoxide: look around a bit, I think there's a way to disable "windows fast boot" or something similar | 22:53 |
| sarnold | !fastboot | 22:53 |
| Lafrag | what that group is maded for? | 22:53 |
| Nitrousoxide | I don't think Fast Startup is the problem, but I'll give that a try. | 22:54 |
| ash_worksi | can `watch` just keep printing lines to the buffer history or do I have to do like `while sleep 2; do <commdn>; done` | 23:09 |
| sarnold | I don't recall seeing anything like that in the watch manpage before | 23:10 |
| sarnold | I use a loop like that more often than watch | 23:11 |
| Nitrousoxide | sarnold: That didn't seem to fix it. | 23:15 |
| sarnold | Nitrousoxide: dang :( | 23:16 |
| Nitrousoxide | Windows is such a pain in the ass lmao | 23:17 |
| lepricated | windows 10 has caused to so many headaches | 23:17 |
| lepricated | It would be fine if they had a consumer LTS version | 23:18 |
| lepricated | each build update always broke something | 23:18 |
| lepricated | I think it was 1909 build that broke my surface pro 7 dock usb drivers | 23:19 |
| lepricated | usb ports randomly drop now | 23:20 |
| lepricated | leave it to them to break their won firmware | 23:20 |
| lepricated | there LTS that they offer for business is still on 1809 | 23:26 |
| leftyfb | !ot | lepricated | 23:27 |
| ubottu | lepricated: #ubuntu is the Ubuntu support channel, for all Ubuntu-related support questions. Please register with NickServ (see /msg ubottu !register) and use #ubuntu-offtopic for other topics (though our !guidelines apply there too). Thanks! | 23:27 |
| qwertuttyty | https://paste.ubuntu.com/p/2MJczVdSvq/ | 23:31 |
| sarnold | qwertuttyty: perhaps du, df, and ls, all report different sizes for the filesystem and files on it.. | 23:35 |
| sarnold | qwertuttyty: on a zfs filesystem with compression enabled, du -B1 and ls -l output do indeed differ for me .. | 23:39 |
| sarnold | $ du -B1 ./RCU/Design/Memory-Ordering/TreeRCU-gp.svg | 23:40 |
| sarnold | 72192./RCU/Design/Memory-Ordering/TreeRCU-gp.svg | 23:40 |
| sarnold | $ ls -l ./RCU/Design/Memory-Ordering/TreeRCU-gp.svg | 23:40 |
| sarnold | -rw-rw-r-- 1 sarnold sarnold 213622 Aug 2 2020 ./RCU/Design/Memory-Ordering/TreeRCU-gp.svg | 23:40 |
| jas02 | Hello guys, I am wondering, if it's possible to use Ubuntu Core as minimalistic OS for LXD on bare metal | 23:50 |
| jas02 | Is it good fit? Any experience? | 23:50 |
| sarnold | I've not tried it but it feels pretty plausible | 23:50 |
Generated by irclog2html.py 2.7 by Marius Gedminas - find it at mg.pov.lt!