 @RealDanct12 [to everyone on xiaomi redmi note 7, we've fixed the fingerprint sensor pressing …], Fullscreen option is rather nice, basically just map to f11, for notch phones is a nice option
 @Flohack [Not impressed, I did it last week ^^ https://github.com/Flohack74/android_kernel …], this needed for which issue?
 Hello everyone. I would like to ask you for help. In general, I found that the Internet does not work for me in Anbox at all, and I decided to check ip addr show and ip route in adb shell to make sure that traffic routing is configured ... … and here is the result of the ip addr show: … armv7-a-neon: / $ ip addr show … 1: lo: <
[03:40] <ubptgbot> LOOPBACK, UP, LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1 …     link / loopback 00: 00: 00: 00: 00: 00 brd 00: 00: 00: 00: 00: 00 …     inet 127.0.0.1/8 scope host lo …        valid_lft forever preferred_lft forever …     inet6 :: 1/128 scope host …        valid_lft forever preferred_lft forever … 2: ip_vti0 @ NONE: <NOARP>
[03:40] <ubptgbot>  mtu 1480 qdisc noop state DOWN group default qlen 1 …     link / ipip 0.0.0.0 brd 0.0.0.0 … 3: ip6_vti0 @ NONE: <NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1 …     link / tunnel6 :: brd :: … 4: sit0 @ NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1 …     link / sit 0.0.0.0 brd 0.0.0.0 … 5: ip6tnl0 @ NONE: <NOARP> mt
[03:40] <ubptgbot> u 1452 qdisc noop state DOWN group default qlen 1 …     link / tunnel6 :: brd :: … 31: eth0 @ if32: <BROADCAST, MULTICAST, UP, LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 …     link / ether c2: f3: 75: 9d: 60: 28 brd ff: ff: ff: ff: ff: ff link-netnsid 0 …     inet 192.168.250.2/24 brd 192.168.250.255 scope global eth0 …
[03:40] <ubptgbot>   valid_lft forever preferred_lft forever …     inet6 fe80 :: c0f3: 75ff: fe9d: 6028/64 scope link …        valid_lft forever preferred_lft forever … armv7-a-neon: / $ … you can see that for some reason all the ip addresses are incorrect, so the Internet does not work … result with ip route: … armv7-a-neon: / $ ip route … 192.168.250.0/24 dev eth0
[03:40] <ubptgbot> proto kernel scope link src 192.168.250.2 … armv7-a-neon: / $ … here you can also notice that the routing is wrong, so the Internet traffic just beats and does not pass ... … Maybe someone knows how to fix this and start everything?
 Which device?
 @TartanSpartan [Which device?], Redmi 7
[03:42] <ubptgbot> Onesalem_admin was added by: Onesalem_admin
[03:42] <ubptgbot> Arunkumar_sp was added by: Arunkumar_sp
[04:05] <ubptgbot> deemounus was added by: deemounus
 Hey guys! A quick question. Nexus 5, hammerhead, latest UBTouch installed. Once I plug it to a computer it enables a desktop mode as expected, but the "touchbar" on the phone is not operational - and buttons while appear in the "pressed" state - it doesn't really work. Connecting bluetooth devices also didn't worked. What might it be? (
[04:07] <ubptgbot> Note: before installing UBTouch I've upgraded stock Android to 6.0.1 to get the latest radio)
 (by "plug to computer" I mean connecting the microusbto hdmi cable)
[05:39] <ubptgbot> <Николайка Королёв> Hello everyone. Can anyone explain - just cleanly installed ub on N5 - I look at df -h space in / - 2 GB in total, 1.8 GB is occupied, 218 MB is free. To roll anbox the following commands (by adb): … 1) sudo mount -o rw, remount / … Wonderful further … 2) sudo apt update … I run df -h again - in / out of 2 already 1.9 GB are occ
[05:39] <ubptgbot> upied, and free space is 0! Naturally, the following command reports that there is no space in / var / cache / apt / archives: … 3) sudo apt install anbox-ubuntu-touch android-tools-adb … How do I allocate more space on my smartphone for installing UB?
 May i compensate a dev for there time on building a port for a Samsung Note 10+ SM-N9750?
 @Nautilus [May i compensate a dev for there time on building a port for a Samsung Note 10+ …], If it's doable it's like 120h of work of dev work and with 10€/h which is like a really low income for a Dev. So I think is impossible to pay for it. Further you need to donate the device once
 yeah, that device looks rather expensive compared to what we normally work with
 Nautilus if just you want to try UT, buying one of currently supported devices is probably a better and much more cheaper idea
 @Nautilus [May i compensate a dev for there time on building a port for a Samsung Note 10+ …], [Edit] If it's doable it's like 120h of work and with 10€/h which is like a really low income for a Dev. So I think it is impossible to pay for it. Further you need to donate the device once
 @DarknessHiddenorg [this needed for which issue?], If touching your fingerprint sensor makes funny movements and selections in the app drawer :)
[08:08] <ubptgbot> Ingo was added by: Ingo
 @Flohack [If touching your fingerprint sensor makes funny movements and selections in the …], After impalement  that idk how to test because my fp sensor not goodix
 @DarknessHiddenorg [After impalement  that idk how to test because my fp sensor not goodix], Well then dont implement it. Grep your kernel defconfig for FINGERPRINT or FP andsee if different drivers are enabled, and try to guess where it happens
[08:15] <ubptgbot> Buzz Cut was added by: Buzz Cut
 @Flohack [If touching your fingerprint sensor makes funny movements and selections in the …], I don't have have this issue
 Just when touching  sensor screen become up
 @DarknessHiddenorg [Just when touching  sensor screen become up], Thats similar, you might want to look at this: https://github.com/Flohack74/android_kernel_samsung_s3ve3g/commit/a14b78c3ad4ddd43d475e41990a14e4a83019d01 - its only an example, you need to find the driver for your touch keys and kick it out
 @Flohack [Thats similar, you might want to look at this: https://github.com/Flohack74/andr …], OK how about pressing power button (just pressing) showing power menu on mediatek device
 @DarknessHiddenorg [OK how about pressing power button (just pressing) showing power menu on mediate …], Best would be on touching open the app drawer
 @nanu_c [Best would be on touching open the app drawer], Will be best if that can be trackpad
 (Sticker, 512x512) https://irc.ubports.com/EorVMQuS.webp
 (Sticker, 512x512) https://irc.ubports.com/un0e2VQ0.webp
 @DarknessHiddenorg [OK how about pressing power button (just pressing) showing power menu on mediate …], Thats wrong, but I doubt its Mediatek problem, its how Lomiri thinks about this keypress: In desktop mode this menu would be shown immediately. On a mobile device it should turn off the screen instead. Did you inject the config file fo
[10:08] <ubptgbot> r Lomiri properly?
 @Flohack [Thats wrong, but I doubt its Mediatek problem, its how Lomiri thinks about this …], Any example of config file?
 @DarknessHiddenorg [Any example of config file?], https://github.com/Flohack74/android_device_huawei_angler/blob/halium-7.1/ubuntu/display.conf
 It might also be the repowerd config, I forgot: https://github.com/Flohack74/android_device_huawei_angler/blob/halium-7.1/ubuntu/config-default.xml
 But please move this discussion to porting roup, its rather OT here
 [Edit] But please move this discussion to porting group, its rather OT here
 @Flohack [But please move this discussion to porting group, its rather OT here], Yes
 Hello. I have an M10 tablet from BQ, with Ubuntu Touch installed.  Is it possible to install Ubuntu Desktop on this tablet?
 [Edit] Hello. I have a M10 tablet from BQ, with Ubuntu Touch installed.  Is it possible to install Ubuntu Desktop on this tablet?
 @JyotiGomes [Hello. I have a M10 tablet from BQ, with Ubuntu Touch installed.  Is it possible …], PostmarketOs tries to get Desktop Linux on devices and for that device no work has been done.
 @JyotiGomes [Hello. I have a M10 tablet from BQ, with Ubuntu Touch installed.  Is it possible …], No, sorry. ITs an Android hardware base, closed source drivers, you need to run an Android container on the lower level to even get the screen enabled
 @Николайка Королёв [Hello everyone. Can anyone explain - just cleanly installed ub on N5 - I look at …], hi with the coming ota 16 you no longer need to all that, you'll only need one command: `anbox-tool install`
[11:05] <ubptgbot> P3r0na was added by: P3r0na
 @nanu_c [PostmarketOs tries to get Desktop Linux on devices and for that device no work h …], Tkank you
 @Flohack [No, sorry. ITs an Android hardware base, closed source drivers, you need to run …], Thanks a lot
 (Photo, 960x1280) https://irc.ubports.com/Ph30twoU.png 😎
 oh interesting
 (Photo, 1280x960) https://irc.ubports.com/g0Y0J0z1.png
 Had this error running the latest beta for the Nexus 5 ony win7pro.
 uh can you share the full error?
 (Photo, 1280x720) https://irc.ubports.com/GbXMj4tw.png
 that looks like a different error :/
 what going on here with these connection errors :/
 (Photo, 1280x720) https://irc.ubports.com/EzsSFu4c.png
 can you try a linux liveusb?
 there's seems to be something seriously wrong with windows
 @Fuseteam [what going on here with these connection errors :/], if @neothethird is in this group, i'd blame him for that lol
 @RealDanct12 [if @neothethird is in this group, i'd blame him for that lol], nah i blame windows :^3
 @RealDanct12 [if @neothethird is in this group, i'd blame him for that lol], [Edit] nah, i blame windows :^3
 @Fuseteam [what going on here with these connection errors :/], [Edit] if @neothethird is in this group, i'd blame them for that lol
 i was finally able to bypass it and work loading so will see??? :)
 @RealDanct12 [if @neothethird is in this group, i'd blame them for that lol], *neothethird has left the group* HAH, LET'S SEE YOU BLAME ME WHEN I'M NOT EVEN HERE
 I'm hopefully going to get to the bottom of that network error this week-end
 also prompted installing universal adb installer
 @Fuseteam [there's seems to be something seriously wrong with windows], I've never been able to get the UB Ports installer to work on Windows.
 ahhhh hmmmm ok yup, i have a new box on the way for running linux
 Does anyone know the battery life of the Pinephone running UB Touch?
 @Braillynn [I've never been able to get the UB Ports installer to work on Windows.], I know saying this doesn't help you at all, but it works on my machine 😇 … But seriously though, we're going have to have a proper look at sorting out both the windows and MacOS issues soon. Got a couple things we need to land before, but I hope we c
[18:05] <ubptgbot> an get to it within the next month.
 👍
 @neothethird [I know saying this doesn't help you at all, but it works on my machine 😇 … But s …], That's awesome! While I don't use Windows or Mac OS anymore, I know a lot of people do. When does the Chrome OS app come out? You know with it now being the second most dominant desktop OS.
 @Braillynn [That's awesome! While I don't use Windows or Mac OS anymore, I know a lot of peo …], It work on chromeos already
 @Fuseteam [It work on chromeos already], I'm just being funny.
 Granted you can run the appimage:p
 Or install the deb 🤔
 Haha, uhhh, i don't know the last thing about chrome os ^^ doesn't seem like it's going to happen https://github.com/electron/electron/issues/12712
 We need to execute binaries, a PWA is not cutting it
 oh fun
 Apparently ADB in browser is working now.
 You can contact adb and fastboot-speaking devices from WebAssembly.
 @UniversalSuperBox [Apparently ADB in browser is working now.], Necromancy
 This is wrong and should be punished.
 wut that sound dangerous 👀
 webassembly eh hmmm
 Anyone up for also re-implementing fastboot and heimdall in webassembly
 Everyone decided that they couldn't bring back java applets so they found another way
 Computers were a mistake, rocks aren't meant to think
 webassembly apps on ut anyone? oh wait—
 @neothethird [Anyone up for also re-implementing fastboot and heimdall in webassembly], https://github.com/kdrag0n/fastboot.js … https://github.com/kdrag0n/android-webinstall
 someone did it
 y'all need jesus
 @Fuseteam [webassembly apps on ut anyone? oh wait—], Just use QtWebEngine.
 @lackingcheesepuffs [https://github.com/kdrag0n/fastboot.js … https://github.com/kdrag0n/android-webin …], If there's also heimdall I'm going to freak out
 @UniversalSuperBox [Just use QtWebEngine.], mhm `webapp-container` at least :p
 [Edit] someone kdragon did it
 @neothethird [If there's also heimdall I'm going to freak out], I don't see one, but I didn't cross the first page of ddg
 @neothethird [If there's also heimdall I'm going to freak out], there isn't :P
 Yet... 😁
 https://github.com/linuxserver/heimdalljs
 oh wait wrong heimdall
 😂
 Not quite
 @Fuseteam [oh wait wrong heimdall], that was scary :D
 @lackingcheesepuffs [that was scary :D], x^D
 Anyways, i would like to get back to working on useful stuff soon, not re-writing the Android tools wrapper a third time
 (Photo, 1080x1920) https://irc.ubports.com/nX4x0188.png
 oh great, so now we can build a UT installer for android
 (Photo, 1080x1920) https://irc.ubports.com/gwbtp0NG.png this is why i love duck
 install and reboot? :p
 @dohbee [oh great, so now we can build a UT installer for android], that gave me a cool idea
 Will try and see if it is worth it :3
 @Fuseteam [install and reboot? :p], no, run the installer on your android phone and with OTG install UT on another device
 @dohbee [no, run the installer on your android phone and with OTG install UT on another d …], oh yeah :p
 @dohbee [oh great, so now we can build a UT installer for android], nice
 maybe self-installer? lol
 tbh install and reboot would probably be similar to the twrp android app
 > wake up android studio, we have a crazy idea to work on
 root, install, reboot to recovery :p
 Idk why I keep getting these ideas in exam days lmao … back to work...
 @dohbee [oh great, so now we can build a UT installer for android], exhales
 i prefer to have ubports installer built for arm64
 (Photo, 1280x720) https://irc.ubports.com/Vh8i3uv6.png so i could use it on something like this
 @RealDanct12 [i prefer to have ubports installer built for arm64], That's in the cards
 @RealDanct12 [<reply to media>], `I used ubuntu phone to install ubuntu touch on a phone`
 :D
 @RealDanct12 [<reply to media>], [Edit] `I used linux phone to install linux on a phone`
 actually that's arch on a phone
 well, it's possible actually
 I remember flashing something from Gemini PDA
 we already have adb installed by default xD
 It is. We already had videos of this in 2016 with magic device tool (seems like ages ago ^^)
 Magic device tool
 2016 makes me think of the ubports dock lol
[19:30] <ubptgbot> bizenBrune was added by: bizenBrune
 Omg! I have just received mine 2 ethereum now!!! https://bit.ly/3lbAFSR
 Trying out UB Touch on the PinePhone and it runs very well!
 Anyone port a BlackBerry Key2
 not yet
 😅
 feel free to do yourseldf
 [Edit] feel free to do yourself
 @MotorCityBrent [Anyone port a BlackBerry Key2], That would be amazing.
 Ive already DeGoogled as far as possible. Then I found you guys! 🍻
 @NotKit [if interested, I'm working on a port for Lenovo Tab M10 FHD Plus (https://gitlab …], Hi mate, how is this coming along.
 What are the update channels for the Pinephone?
 What are the differences?
 are those listed under update settings?
 i think update frequency is the difference but iirc the pinephone is on a different schedule
 I tried the kernalupgrade channel and it wouldn't let my device boot so guess I'll keep it on stable?
 kernelupgrade fails to boot about every other boot. Reset it and it'll run again.
 But there are more things missing.
 Best to keep the pinephone on rc or devel.
 @wayneTBT [Hi mate, how is this coming along.], same so far, I ordered BT keyboard case for it though, so will need to fix that first
 @UniversalSuperBox [Best to keep the pinephone on rc or devel.], Which one is more stable?
 None of them are particularly pocketable.
 rc and devel give you access to much newer things than stable. But there's always something regressing so I can't release the whole lot.
 Makes sense
 I had Fedora on it and it wasn't working well for me.
 @NotKit [same so far, I ordered BT keyboard case for it though, so will need to fix that …], I dont know if I can be of any help, Im happy to try, though I dont know very much about the process.
 Ub Touch seems more usable atm.
 if you have the device, did it come with Android 9 or 10?
 Mine came with Android 10
 [Edit] Mine came with Android 10, I take it thats not good.
 The newer it is the more experimental it becomes
 Hhmmmm, yes.  Thats a bummer.
 Can i port ubuntu touch to Android 5.0.2?🙈😊
 @NotKit [if you have the device, did it come with Android 9 or 10?], Mine seems to have Android 9. That's at least what the box says.
 @wayneTBT [Hhmmmm, yes.  Thats a bummer.], nah, just extra step to reflash it to 9
 @NotKit [nah, just extra step to reflash it to 9], Ah ok, I didnt know the rollback capabilities.
 @Braillynn [I tried the kernalupgrade channel and it wouldn't let my device boot so guess I' …], oh right that channel has newer kernel 👀
 I have a samsung j5 2015, and I found there is a ubuntu touch gsi, and I wonder can I use it