[01:21] <blessed> kugkug
 Um, can someone help?  My desktop machine doesn’t connect to the network over ethernet.
 <tap tap tap> is this thing on?
 If nobody knows the answer, nobody will respond. Try having some patience. This is completely volunteer support and nobody is required to answer you. :) (re @heysoundude: <tap tap tap> is this thing on?)
 Was it working and then stopped?What computer?What Lubuntu version? (re @heysoundude: Um, can someone help?  My desktop machine doesn’t connect to the network over ethernet.)
 20.04 (re @Leokolb: Was it working and then stopped?What computer?What Lubuntu version?)
 Ok - was it working before?
 uname -r returns k5.4.0-67-generic
 Yes. I updated and poof, gone
 I asked if the network connection had been working and then stopped
 Have you tried to disconnect the cable and then re-connect it?
 It did, then I updated and rebooted and it’s gone (re @Leokolb: I asked if the network connection had been working and then stopped)
 I’ve tried reseating cables on the router and this machine
 The router sees it as connected, but the computer won’t connect to the internet
 does nm-tray show a wired connection?
 Another thing - what were you updating from?
 It shows 2 - I’ve tethered my phone to it for the time being (re @Leokolb: does nm-tray show a wired connection?)
 I just did an apt update on the command line (re @Leokolb: Another thing - what were you updating from?)
 2 wired connections?
 And there were a bunch of linux updated
 Yes, my iPhone over USB and my ethernet to the router (re @Leokolb: 2 wired connections?)
 are you using the phone to connect to internet?
 Yes
 thinking....
 Funny thing: I get double the speed from my mobile provider than my ISP
 usually you get what you pay for.. (re @heysoundude: Funny thing: I get double the speed from my mobile provider than my ISP)
 have you checked the settings of the wired connection in nm-tray?
 go to connection information and see what the wired connection tab shows
 Wired connection 2
 Interface: Ethernet
 Makes little sense to me, as this is my iPhone connection
 But if I Edit Connections from nm-tray, it shows BOTH wired 1 and wired 2
 Wired 1 is my usual ethernet to the router.
 so it looks like maybe you need to look at the settings via edit  for wired connection 1
 IPv$ settings?
 Looks like I’m getting an address from my mobile provider 172.xxx.xxx.xxx. My router dishes out addys at 192 etc (re @Leokolb: IPv4 settings?)
 Anything in particular? (re @Leokolb: so it looks like maybe you need to look at the settings via edit  for wired connection 1)
 The device seems right, with a MAC address.
 maybe a bit radical - but I have sometimes deleted the connections - rebooted and then entered nm-tray and created a new wired connection
 No cloned MAC address under ethernet, mtu is correct
 Yeah, but these things do have a habit of working (re @Leokolb: maybe a bit radical - but I have sometimes deleted the connections - rebooted and then entered nm-tray and created a new wired connection)
 I’ll try it after the workday is done
 Unless someone can offer better solutions.
 right - close the tethered connection - delete wired number 1 - reboot and re-create number one -try that without having tehering running
 Yessir, got it. Thank you (re @Leokolb: right - close the tethered connection - delete wired number 1 - reboot and re-create number one -try that without having tehering running)
 np - good luck (re @heysoundude: Yessir, got it. Thank you)
[21:00] <accrozano> hello, someone can help me?
 hello i am accrozano, can you help me?
 do you have an actual question?
 "yes can you help me" doesn't count ;)
[21:06] <teward> !ask
 also as you can see IRC and Telegram channels are bridged together :P
 ok, the file manager is not working properly, it is not unzipping .rar files, someone told me about a package called "Lxqt-archives", but I can't find where to download it, so I decided to ask for help here
 lxqt-archiver is only available in the development release which is scheduled to be released next month. (re @LuizAAM: ok, the file manager is not working properly, it is not unzipping .rar files, someone told me about a package called "Lxqt-archives", but I can't find where to download it, so I decided to ask for help here)
 is there anything i can use now?
 wxl can correct me if I am wrong but I think xarchiver, file-roller and engrampa all should be able to work with pcmanfm-qt
 correct me if i'm wrong
 but don't you need rar and unrar for RAR support @kc2bez ?
 standard file-roller, etc. from GNOME and such don't work with RAR unless you have the requisite RAR bits installed
 here's a thought, try installing unrar on the command line, and then restart and try unzipping the RAR, see if it works. (re @LuizAAM: ok, the file manager is not working properly, it is not unzipping .rar files, someone told me about a package called "Lxqt-archives", but I can't find where to download it, so I decided to ask for help here)
 just a shot in the dark, but something I noticed on 12.04, 14.04, 16.04, 18.04, 20.04 Lubuntu Xubuntu normal Ubuntu, etc.
 Oh maybe, I never thought of that. (re @teward001: but don't you need rar and unrar for RAR support @kc2bez ?)
 yeah but @LuizAAM sudo apt install rar unrar on the command line.  Install those two packages, then see if it works
 *has 20.04 on the RPi and runs some tests*)
 ok it worked, thanks (re @teward001: yeah but @LuizAAM sudo apt install rar unrar on the command line.  Install those two packages, then see if it works)
 yep
 interesting that rar doesn't exist on the arm64 repos though cc @kc2bez
 iiiiiiiiiinteresting...
 indeed
 ahhh i see
 so rar is in multiverse since it's non-free
 and is only available on i386 and amd64
 which... sounds weird
 i'll talk to doko
 since doko TIL
 well that explains it
 @kc2bez rar is built by the same people who make WinRAR
 so it's a proprietary format.  ERR:NoOpenSpec for creating RAR files
 explains a lot for RPi users
[21:49] <kc2bez[m]> oh
 looks like https://peazip.github.io/free-rar-create.html is a good explanantion of no open source RAR stuff
 which sucks.
 meh
[21:52] <kc2bez[m]> Yeah, bummer.
[23:41] <guiverc> wxl, Thank You.  I love your response to bug 1886561; I couldn't work out how to respond so use apport-collect as delay (I was trying to address the idea that's it's broken.. but couldn't find the words.. that bug report was used in support stuff)
[23:49] <wxl> guiverc: np. if you ever need recommendations, let me know :)