[13:12] <dfd> Hello everyone, I would like to know if i can tether internet from Android /laptop USB to ps4 ?
[14:23] <Evropi> the full hangs are continuing, and the issue isn't fixed in backports which I updated to. Here is a paste from a few minutes ago. Does this tell you anything? https://p.teknik.io/Simple/xsszJ
[14:24] <Evropi> The main things of note apart from exotic hardware is the fact there's a raidz(2) zpool in that machine
[14:30] <Evropi> the other thing I noticed is that baloo completely fails to work unfortunately. Either way it wasn't that, disabling it didn't fix anything
 Evropi how long is your system up before crashing?
[14:41] <Evropi> I haven't timed it, but definitely under 10 min
[14:41] <Evropi> I am now trying to swap out nouveau as it might be an issue with that. When I'm on the CPU's Intel driver I don't get any issues
[14:45] <Evropi> hmm... how do I install the Nvidia 390 driver without the card actually plugged in?
[14:45] <Evropi> due to a quirk in the bios, I can either use the embedded controller or the other but cannot have both plugged in (it's a Dell PowerEdge server)
[14:47] <Evropi> nvm just apt instal
 Do you have ECC RAM installed?  Your error log has EDAC sbridge errors and seems to be complaining  about ECC disabled (1223)...
[14:50] <Evropi> the chipset supports ECC RAM but I'm pretty sure the stick is non-ECC
[14:50] <Evropi> with that said I also think the BIOS doesn't realise it's non-ECC
 This links says ECC mismatch was causing boot failure, black listing EDAC modules may help, but your problem seems different in that you can boot your system: https://superuser.com/questions/1152662/centos-7-wont-boot-edac-sbridge-couldnt-find-mci-handler
 Also, what is plugged into the USB ports that would be flooding the bandwidth (1898:  usb 2-1.1: cannot submit urb 0, error -28: not enough bandwidth)?
[14:56] <Evropi> mouse, keyboard, cheapo usb sound card. Do you know of a way to realise which is which?
[14:57] <Evropi> re: ECC ram, I checked yeah and it reports as multi-bit ecc
[14:57] <Evropi> 72 bit width. I still think that's incorrect because it wasn't advertised (I replaced the definitely-ECC cards when I got the server to increase capacity by 4GB)
 lsusb shows attached usb devices
[15:03] <Evropi> DarinMiller: not too sure which one from these it is. I can unplug the internal SD https://p.teknik.io/Raw/AJBTC
[15:03] <Evropi> anyway NVIDIA proprietary installed, let's see how it goes - may have been some sort of graphics card issue. Xorg logs had nothing of note
[15:58] <IrcsomeBot2> <Chandra Sekhar> 2Y Wealth Academy … Join for Knowledge on Stock Market.  … Remember Markets are subject to risk, 2Y Wealth Advisors do not take responsibility of any profit or loss. … We share Educational content, kindly trade on your own risk. … https://t.me/Official2YWealthAdvisors
[15:58] <Evropi> spam??
[16:22] <Maik> Evropi: yeah, one of the reasons i hate those telegram bridges
[16:22] <Maik> they can remove it on Telegram but it sticks on the IRC side
[16:24] <Evropi> thanks for your help by the way DarinMiller. Seems it was ultimately a graphics issue (there were other weird artefacts now and then with nouveau. All gone after going proprietary. A win for practicality and a defeat for freedom)
 Good to hear.