 hi
[17:26] <enderpman> ethernet worked during liveboot, but ethernet doesn't work after installation
[23:17] <biscuitbutter[m]> Hi, I'm having issues. Ethernet works during the live session, but after installation, ethernet no longer works. I'm running 20.04.2. These are my specs: https://www.cnet.com/products/dell-latitude-3150-11-6-pentium-n3540-4-gb-ram-500-gb-hdd/ My ethernet is Realtek PCIe GbE Family Controller. Please let me know what additional information is necessary to diagnose my issue.
[23:18] <biscuitbutter[m]>  * Hi, I'm having issues. Ethernet works during the live session, but after installation, ethernet no longer works. I'm running 20.04.2. These are my specs: https://www.cnet.com/products/dell-latitude-3150-11-6-pentium-n3540-4-gb-ram-500-gb-hdd/ My ethernet is Realtek PCIe GbE Family Controller. I booted from USB, and I used rufus with the .iso. Please let me know what additional information is necessary to diagnose my issue.
[23:19] <biscuitbutter[m]> The hdd was replaced with a ssd
[23:20] <biscuitbutter[m]>  * The hdd was replaced with a ssd, also my boot mode is legacy and safe boot is off.
[23:34] <guiverc> biscuitbutter[m], don't repeat.. people will reply as they're able to.    After it upgrades it stops working.. was that after the upgrade from 5.8 kernel to 5.11?  If so have you tried using the GA kernel option? (ie. 5.4)
[23:39] <biscuitbutter[m]> guiverc: Never upgraded. Booted from usb. Ethernet works during the live session, before installation (when the shortcut to the installer is on the desktop). After installation, ethernet no longer works. The kernel version is whichever one it is for 20.04.2 LTS
[23:40] <guiverc> 20.04.2 has 5.8 on media; but will upgrade to 5.11 (20.04.3 with kernel bump out already - why my suggestion). Did your system upgrade (during install?)
[23:42] <biscuitbutter[m]> guiverc: Oh. That might have been what happened. Another weird thing is after installation there is the error "Invalid partition table!"
[23:42] <biscuitbutter[m]> > <@guiverc:libera.chat> 20.04.2 has 5.8 on media; but will upgrade to 5.11 (20.04.3 with kernel bump out already - why my suggestion). Did your system upgrade (during install?)
[23:42] <biscuitbutter[m]>  * Oh. That might have been what happened. Another weird thing is after installation there is the error "Invalid partition table!" Then I press enter and then it boots when I turn it on
[23:42] <biscuitbutter[m]>  * Oh. That might have been what happened. Another weird thing is after installation there is the error "Invalid partition table!" Then I press enter and then it boots when I turn it on.
[23:43]  * guiverc wonders if the duplication of your entries is bot-bridge issue
[23:44] <biscuitbutter[m]> > * <@guiverc:libera.chat> wonders if the duplication of your entries is bot-bridge issue
[23:44] <biscuitbutter[m]> I'm only sending each message once, including this one.
[23:45] <guiverc> i would explore the partition table first (from live media) but i can't help with that currently (working on something else).. #ubuntu can be used too (more helpers exist there)
[23:46] <biscuitbutter[m]> guiverc: Okay thank you