[04:43] Hello Gen [04:45] HDMI monitor speaker is not working, i tried to reinstall pulse audio, no luck. Any suggestion to fix it ? [04:48] Hi. Does it appear in the 'Output Devices' section of Audio Mixer? [04:50] let me have a look and confirm [04:51] its 'HDMI/DisplayPort 3 (plugged in)' [04:51] But the sound is still coming from some other channel? [04:51] yeah, headphones are working. [04:52] it only not with HDMI [04:52] Try selecting Headphones and switch back to HDMI. [04:54] Is this is a trick or what ? let me try :) hold on please. [04:54] If it doesn't help, try playing with settings under Configuration tab. [04:55] Kind of. PulseAudio may act weird on some hardware, so you have to try tricks in order for it to work properly. [04:58] Plugged in headphones which is working fine, tried to flip back to HDMI -> no luck [05:02] Share the output of `pactl list sinks`. Use paste.ubuntu.com [05:04] ok [05:06] Here you go https://pastebin.com/2eyti07x [05:09] Thank you. Let me look through it. [05:11] That was with headphone connected. [05:14] Try with HDMI as the only available output. (no headphones, etc.) [05:14] ok [05:14] Hold on please [05:16] Here you go, this with HDMI only, headphones disconnected. https://pastebin.com/2gN8KacL [05:18] `pactl set-sink-mute alsa_output.pci-0000_00_1f.3.hdmi-stereo-extra2 1` [05:18] this mutes it [05:18] `pactl set-sink-mute alsa_output.pci-0000_00_1f.3.hdmi-stereo-extra2 0` [05:19] this unmutes it again [05:19] after that [05:19] let me try that [05:21] try modifying this file: ~/.config/pulse/*-default-sink [05:22] from `alsa_output.pci-0000_00_1f.3.analog-stereo` to `alsa_output.pci-0000_00_1f.3.hdmi-stereo-extra2` [05:24] Its already like what you mentioned [05:25] mute and unmute, still not working [05:26] Also ~/.config/pulse/*-default-sink has this alsa_output.pci-0000_00_1f.3.hdmi-stereo-extra2 [05:27] only this line, correct? [05:27] yeah its correct, its already like what you mentioned to changes, so no change needed [05:27] in file /etc/pulse/default.pa comment this line: load-module module-suspend-on-idle [05:28] # load-module module-suspend-on-idle [05:30] done [05:30] whats now [05:31] `pactl set-default-sink alsa_output.pci-0000_00_1f.3.hdmi-stereo-extra2` [05:31] and finally [05:32] modify the priority of hdmi-stereo-2 [05:33] in this file: /usr/share/pulseaudio/alsa-mixer/paths/hdmi-stereo-2 [05:33] priority = 100 [05:34] and restart pulseaudio [05:34] see if it helped [05:35] ok [05:36] pulseaudio -k | kills current active PA server [05:36] pulseaudio -D | start again fully daemonized [05:40] Above commands are not working [05:40] I used this systemctl --user restart pulseaudio [05:41] And not luck still audio not coming up [05:41] looking at this https://pastebin.com/2gN8KacL , alsa.id is mapped to HDMI 2, is that correct ? [05:42] yes [05:43] hmm, but im using HDMI 3, is that still correct ? [05:44] i'm bit confused with all changes happened [05:47] i dont think they're correlated [05:49] ok [05:50] Anything i need to check at this file /etc/modprobe.d/alsa-base.conf ? [05:53] Referring in here, https://ubuntu-mate.community/t/19-10-problem-with-my-sound/20338/10 [05:55] doubt it. maybe try xfce4-mixer [05:55] instead [05:56] https://www.reddit.com/r/xubuntu/comments/3bd655/hdmi_audio_difficulties_solved/ [05:56] https://itectec.com/ubuntu/ubuntu-no-sound-on-hdmi-ubuntu-20-04/ [05:57] maybe reload alsa as well [05:58] let me check [06:01] xfce4-mixer is available here: https://launchpad.net/xfce4-mixer/+packages [06:05] oh my bad. seems like it doesnt exist anymore [06:05] yes :D [06:05] I tried to refresh many times [06:05] i meant the repo [06:12] is there sound if you use this alsa test utility? [06:12] speaker-test --channels 2 --rate 48000 --device default [06:13] nope. [06:14] are you sure monitor speakers work? [06:15] here is that doubt, it was working 2 days ago [06:15] i have to boot up windows harddrive to test the monitor speaker [06:15] will come back [06:15] 2 things: [06:15] hmm, what are they [06:16] first, try restarting your xubuntu system but with your HDMI monitor already connected. or better yet shut it down, unplug the monitor, plug it again, make sure its turned on, then start your computer [06:17] second, as you said, try a different OS/computer/port [06:17] gl [08:13] Hello 👋 [08:14] Issue is not with monitor !! [08:14] Flipped to windows 10, monitor audio is working fine [08:15] Connected to HDMI [09:59] türkçe bilen var mı [10:06] !en | fukaraokan [10:06] fukaraokan: The main Ubuntu IRC channels are English only. For a complete list of channels in other languages, please visit https://wiki.ubuntu.com/IRC/ChannelList [10:06] !tr | fukaraokan [10:06] fukaraokan: Turk ubuntu kullanıcıları, Türkçe yardım ya da geyik için /join #ubuntu-tr hizmetinizde. [10:56] which theme do you prefer === keypushe- is now known as keypusher === coconut_ is now known as coconut === genii-core is now known as genii