| MrConorAE | hello, how do you get Windows 11 to replace the Secure Boot keys? | 01:19 |
|---|---|---|
| MrConorAE | i was trying Ubuntu off of a live usb, and it asked me to "install MOK", and I, not knowing what it meant and assuming it was part of a firmware update which my computer had done earlier, did it | 01:20 |
| MrConorAE | now most of my devices aren't working and File Explorer, Start and Settings won't open | 01:20 |
| MrConorAE | any help would be greatly appreciated | 01:20 |
| toddc | MrConorAE: boot a Windows disk and it will offer a repair option | 01:21 |
| MrConorAE | how do you make a windows disk? | 01:22 |
| MrConorAE | Windows 11 is installed on the SSD, but do you mean a recovery USB? | 01:22 |
| toddc | either will work 1 sec looking for address | 01:23 |
| MrConorAE | the laptop still boots from the SSD, but no repair option is available | 01:24 |
| MrConorAE | even holding SHIFT and clicking Restart to get to recovery options doesn't work, my computer just reboots normally | 01:24 |
| MrConorAE | it's a Lenovo, if that helps | 01:24 |
| toddc | https://www.microsoft.com/software-download/windows11 from a working windows this makes a usb boot disk with the repair option | 01:24 |
| mybalzitch | windows official documentation now says you have to interrupt the reboot process like 3 times to get the repair options | 01:25 |
| mybalzitch | so forcefully power it off when the pinwheel shows up | 01:25 |
| MrConorAE | mybalzitch: i'll try that | 01:25 |
| toddc | mybalzitch: good to know thanks | 01:26 |
| MrConorAE | toddc: so then I boot from that, and ask it to repair? | 01:26 |
| Peter1 | Hello which is the correct extension for a sha 256 checksum on ubuntu sha256 like on windows or sha2-256 or sha256sum or sha2 or something else entierly? | 01:26 |
| toddc | yes it should see that windows 11 was installed and offer up a repair option | 01:26 |
| MrConorAE | mybalzitch: interrupting now | 01:27 |
| MrConorAE | oh - it said "preparing automatic repair" then proceeded to reboot again and appeared to boot normally | 01:29 |
| MrConorAE | what :/ | 01:29 |
| MrConorAE | also, every time it boots it flashes a message saying "please wait while we install a system update" with the Lenovo logo - is that something I should be worried about? | 01:29 |
| MrConorAE | mybalzitch: nope, still booting to windows | 01:30 |
| MrConorAE | ima go make a recovery USB now | 01:30 |
| MrConorAE | let me know if you think of anything else :/ | 01:31 |
| TJ- | Peter1: Linux doesn't rely/bother about file extensions, it can be anything | 01:31 |
| Peter1 | To go to repair options on windows hold Shift while restarting from the Power menu and it should show you the repair options after the restart. | 01:33 |
| Peter1 | Thank you for the answer. | 01:38 |
| Peter1 | Thought which is the most common extension for a sha 256 hash then? If any is used. | 01:49 |
| TJ- | Peter1: the archive doesn't use an extension. it calls the file SHA256SUMS | 01:53 |
| MrConorAE | Peter1: that doesn't work | 01:54 |
| MrConorAE | my computer just reboots normally if i try | 01:54 |
| Peter1 | MrConorAE Then sorry i have only windows 10 and there holding the shift key and pressing restart in the power menu works. | 01:59 |
| Peter1 | TJ- Thank you for the answer. | 02:01 |
| Peter1 | MrConorAE That is holding it before i press restart and until it starts rebooting. | 02:03 |
| MrConorAE | Peter1: Yes, I've tried that: my computer just says "Please wait" and then reboots normally. | 02:04 |
| Peter1 | MrConorAE What about trying the other methods as described here: https://www.minitool.com/news/advanced-options-windows-10-009.html | 02:09 |
| MrConorAE | toddc: i have a "repair your computer" link, but on the recovery screen that follows there is no "reset" option | 02:09 |
| Peter1 | What about the methods here: https://www.dell.com/support/kbdoc/en-bs/000147155/booting-to-the-advanced-startup-options-menu-in-windows-10 | 02:25 |
| Peter1 | https://pureinfotech.com/access-advanced-startup-options-windows-11/ | 02:25 |
| Peter1 | https://thegeekpage.com/how-to-boot-into-advanced-startup-mode-in-windows-11/ | 02:25 |
| Peter1 | https://gearupwindows.com/how-to-access-windows-11-boot-advanced-options-menu/?amp=1 | 02:25 |
| TJ- | MrConorAE: if you've added Machine Owners Keys, you can clear those from the motherboard's firmware setup options | 02:27 |
| TJ- | If you're doing a Windows recovery this should really be moved to #windows, this channel is for Ubuntu issues | 02:28 |
| === Guest8335 is now known as riboczki | ||
| riboczki | Evening to you all | 02:36 |
| MrConorAE | TJ-: yea i tried clearing them but that didn't help | 02:53 |
| MrConorAE | i'll move, thanks for all the help toddc , Peter1 and mybalzitch | 02:54 |
| smury | s | 03:06 |
| jcbjoe2021 | guys here is my situation. im getting a gift card from amazon for a unreparable mac computer i sent them the budget is $1,444 im looking for something that just works out of the box. i can configure and do stuff later i just want to be up and running. i was advised about some thinkpads. what do you guys recommend? they have to be from amazon | 03:59 |
| lotuspsychje | !hardware | jcbjoe2021 | 03:59 |
| ubottu | jcbjoe2021: For lists of supported hardware on Ubuntu see https://wiki.ubuntu.com/HardwareSupport - To help debugging and improving hardware detection, see https://wiki.ubuntu.com/DebuggingHardwareDetection | 03:59 |
| lotuspsychje | jcbjoe2021: most machines work with ubuntu pretty good, maybe to avoid some chipsets like realtek | 04:00 |
| lotuspsychje | jcbjoe2021: lenovo's might give some acpi issues a lot too | 04:00 |
| jcbjoe2021 | ok | 04:00 |
| lotuspsychje | jcbjoe2021: in general we cant say a brand works right out of the box for every hardware part inside | 04:01 |
| jcbjoe2021 | lotuspsychje: i noticed thinkpads aren't on the hardware support | 04:01 |
| lotuspsychje | jcbjoe2021: a lot of brands will work like a charm, even without them showing on the hardware wiki | 04:02 |
| jcbjoe2021 | got it | 04:02 |
| lotuspsychje | jcbjoe2021: amd cpu/gpu's might also need higher kernel fiddling | 04:03 |
| Kilroy | a friend who got ubuntu working on a thinkpad (I am like 80% sure it was a thinkpad) | 04:04 |
| TJ- | jcbjoe2021: I have 6 Lenovo E495s, no problems at all with Linux, and Ryzen 7 | 04:04 |
| jcbjoe2021 | TJ-: let me see if amazon has that model | 04:04 |
| jcbjoe2021 | TJ-: are those old models? | 04:05 |
| TJ- | jcbjoe2021: April 2020 | 04:05 |
| lotuspsychje | TJ-: wich release are you running on those | 04:06 |
| TJ- | lotuspsychje: Debian bullseye, Ubuntu 20.04 | 04:07 |
| lotuspsychje | stock kernel or hwe? | 04:07 |
| jcbjoe2021 | TJ-: Lenovo ThinkPad E495 14" Full HD Laptop, AMD Ryzen 5 3500U, 8GB Memory, 256GB SSD, Windows 10 Pro ? | 04:07 |
| TJ- | lotuspsychje: any is fine, but I build our own so 5.15 currenty | 04:07 |
| lotuspsychje | ah cool TJ- | 04:08 |
| TJ- | jcbjoe2021: they were available without windows on when I bought | 04:08 |
| jcbjoe2021 | nice TJ- | 04:08 |
| TJ- | I popped out the 8GiB and put 32GiB in. What is nice they're a space space for an additional 2.5" SATA device | 04:09 |
| TJ- | um, my typing! ... they've a spare space ... | 04:09 |
| jcbjoe2021 | TJ-: i'll do some research on them, will get gift certificate later this week im guessing or next week | 04:10 |
| jcbjoe2021 | Thanks | 04:10 |
| Guest57 | hi i have a problem is this the right place to ask it? | 04:10 |
| TJ- | jcbjoe2021: there may be some more recent releases with basically the same configuration | 04:10 |
| hell_fire | hi um..i have a question | 04:11 |
| hell_fire | my ubuntu is detecting only 1 cpu out of 4 | 04:11 |
| hell_fire | while o windows it is detecting all 4 | 04:11 |
| hell_fire | on* | 04:12 |
| hell_fire | i recetly installed windows and got this problem | 04:12 |
| hell_fire | any help? | 04:12 |
| TJ- | hell_fire: how are you determining there is only 1 ? | 04:12 |
| Menzador | Do [ cat /proc/cpuinfo | grep "cpu cores" | uniq ] | 04:13 |
| hell_fire | well inxi -Fxxx , system moniter , lscpu say only 1 cpu core working | 04:13 |
| hell_fire | Menzador: cpu cores: 1 | 04:13 |
| TJ- | hell_fire: anything on the kernel command-line restricting them? "cat /proc/cmdline" | 04:13 |
| Menzador | ^ | 04:13 |
| hell_fire | BOOT_IMAGE=/boot/vmlinuz-5.13.0-21-generic root=UUID=fc5c9aa2-da43-46ad-a04a-02f2b965605c ro quiet splash noapic nolapic vt.handoff=7 | 04:13 |
| hell_fire | got this back | 04:13 |
| TJ- | hell_fire: do you know why you have "noapic nolapic" ? | 04:14 |
| hell_fire | i've heard it and tried that but i didn't knew it was working | 04:15 |
| TJ- | hell_fire can you share the kernel log? "journalctl -k | nc termbin.com 9999 " | 04:15 |
| hell_fire | okay | 04:15 |
| hell_fire | https://termbin.com/ao16i | 04:16 |
| TJ- | noapic/nolapic == no Advanced (local) programmable interrupt controller | 04:16 |
| hell_fire | ah! | 04:16 |
| hell_fire | so thats the problem? | 04:17 |
| Menzador | In a word, yes | 04:17 |
| hell_fire | i used boot repair too cause the grub menu was not showing up | 04:17 |
| hell_fire | Menzador: ah so how do i fix it? | 04:17 |
| TJ- | "smpboot: SMP disabled" | 04:17 |
| hell_fire | ah there's the problem! | 04:18 |
| Menzador | Find the GRUB_CMDLINE_LINUX_DEFAULT line in /etc/default/grub, delete the "noapic" and "nolapic" options, save and close your editor, and run [ sudo update-grub ] | 04:18 |
| hell_fire | okay | 04:18 |
| Menzador | Reboot and see what happens. I'd suggest taking out "quiet" and "splash" options as well to see if it spits out any errors while loading | 04:20 |
| hell_fire | Menzador: okay | 04:21 |
| Dr-007 | hello. im running 2 vnc servers on my desktop. 1 connects to the actual screen and the other 1 connects to a virtual desktop. ive set it up with Xvfb as follow: https://paste.ubuntu.com/p/vTfGh8pGzm/ | 04:22 |
| Dr-007 | my 'problem' is that its a basic slimmed down GUI of ubuntu that is started. and when i try to start chrome it loads for a little while and then just quits without error | 04:22 |
| hell_fire | Menzador: i'll brb rebooting | 04:23 |
| Dr-007 | is there a way to start the more complex/full GUI of ubuntu? | 04:23 |
| Menzador | Dr-007: Do you have a terminal running in your VNC session? | 04:24 |
| Menzador | And, what DE do you normally use? | 04:24 |
| tomreyn | and which ubuntu release are you using? | 04:25 |
| Dr-007 | i started on in the vnc session, i can start it again. | 04:26 |
| Dr-007 | Linux server 5.13.0-21-generic #21-Ubuntu SMP Tue Oct 19 08:59:28 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux | 04:26 |
| Dr-007 | i changed the line `sudo DISPLAY=:3 gnome-session &` from gnome-session to 'DISPLAY=:3 gnome-shell &' | 04:28 |
| Dr-007 | so without sudo and gnome-shell.. | 04:28 |
| Dr-007 | loads the gui the same | 04:28 |
| Dr-007 | and wierdly i am root | 04:28 |
| hell_fire | i'm back | 04:29 |
| hell_fire | it worked! | 04:29 |
| hell_fire | but... | 04:29 |
| Menzador | Get your butt out of the way... :P | 04:29 |
| hell_fire | i had the edit the bot options myself on booting... | 04:29 |
| hell_fire | Menzador: :P | 04:29 |
| Menzador | You didn't save /etc/default/grub ? | 04:30 |
| hell_fire | i did | 04:30 |
| ravage | and run update-grub? | 04:30 |
| Menzador | ^ | 04:30 |
| hell_fire | nope | 04:31 |
| hell_fire | ah lol | 04:31 |
| hell_fire | my bad | 04:31 |
| hell_fire | sorry! | 04:31 |
| tomreyn | you also seemed to have missed this: hell_fire: do you know why you have "noapic nolapic" ? | 04:31 |
| tomreyn | it's not there by default, so you would have added that at some point | 04:32 |
| tomreyn | maybe to work around another problem? | 04:32 |
| hell_fire | tomreyn: yeah i tried that wayy before i installed windows, that was because some updates were not acting correct.. i think | 04:32 |
| hell_fire | tomreyn: yea i did that | 04:32 |
| tomreyn | if you want to post a system log to have that checked for remaining issues: journalctl -b | nc termbin.com 9999 | 04:33 |
| hell_fire | okie wait | 04:34 |
| hell_fire | https://termbin.com/dn3la | 04:35 |
| tomreyn | hell_fire: is this a satellite "C650 Pro" or "C650D Pro", or one of those but without the "Pro"? | 04:39 |
| tomreyn | it should say on the bottom, if you want to check | 04:40 |
| hell_fire | its just satellite c640 | 04:40 |
| tomreyn | oh 640 sorry | 04:40 |
| hell_fire | yesh | 04:40 |
| hell_fire | :) | 04:40 |
| hell_fire | anyways thanks again Menzador tomreyn and TJ- | 04:40 |
| Menzador | hell_fire: yw! (and, you can re-add the "quiet" and "splash" options if you had them before) | 04:41 |
| hell_fire | okay but is it really required? | 04:42 |
| tomreyn | hell_fire: if you want to update the bios (yours says it is version 1.00 (built 04/01/2011), so probably the first they ever did): https://support.dynabook.com/support/modelHome?freeText=1200012177&osId=3333728 | 04:42 |
| hell_fire | oh? i didn't knew how to update the bios | 04:42 |
| Menzador | hell_fire: Nope, it just makes it look prettier. Whether or not you want dmesg and systemd scrolling across the screen is up to you | 04:43 |
| hell_fire | oh | 04:43 |
| hell_fire | i'll try that but on that link it only shows windoe\ws operating systems | 04:43 |
| hell_fire | windows | 04:44 |
| hell_fire | also my model number is not there in that link | 04:46 |
| tomreyn | hell_fire: It says "Satellite (Pro) C640" | 04:47 |
| tomreyn | actually without "(Pro)" | 04:48 |
| tomreyn | but when you click the bios link on the bottom it does | 04:48 |
| tomreyn | but this "(pro)" apparently means that it works for both | 04:48 |
| tomreyn | you could check the specific model number: PSC00C-01U00P should be printed on the bottom of your laptop | 04:49 |
| hell_fire | thats not my odel number | 04:49 |
| tomreyn | so which is yours? | 04:49 |
| hell_fire | it psc2ug | 04:49 |
| tomreyn | the log looks fine, though, so i guess there's no need to upgrade bios | 04:49 |
| hell_fire | oh okay | 04:49 |
| hell_fire | then after upgrade there won't be any new options in bios?? | 04:50 |
| tomreyn | maybe, maybe not, i don't know. | 04:51 |
| Guest68 | is there a way to be notified if a script is run? | 05:05 |
| tomreyn | Guest68: there are commands you can run to provide some notification on your graphical desktop. you could send emails, or similar. | 05:11 |
| Guest68 | i don't mean my own script, i mean like, if a script in such and such system folder runs due to some automatic thing | 05:13 |
| === Abrax- is now known as Abrax | ||
| tomreyn | Guest68: this probably needs more context, but it already seems like you would better edit the script itself. | 05:17 |
| tomreyn | (or whatever runs the script) | 05:17 |
| tomreyn | whihch ubuntu version and software is this about? | 05:17 |
| Guest68 | i think some of them are python bytecode, but im not sure | 05:18 |
| Guest68 | lts | 05:19 |
| === Yaba_Daba_Doo is now known as beaver | ||
| Dr-007 | what desktop manager/sessions are there? ive now got gnome and mate installed | 06:17 |
| lotuspsychje | !flavours | Dr-007 | 06:18 |
| ubottu | Dr-007: Recognized Ubuntu flavors build on Ubuntu and provide a different user experience out of the box. They are supported both in #ubuntu and in their flavor channel. For a list, see https://www.ubuntu.com/download/ubuntu-flavours | 06:18 |
| === Ricardus_ is now known as Ricardus | ||
| immuda | hello | 06:52 |
| immuda | lotuspsychje, hello | 06:53 |
| tomreyn | hi immuda, do you have an ubuntu support question? | 07:02 |
| immuda | no tomreyn just logged in | 07:15 |
| nurul | hi | 07:46 |
| Dr-007 | thanks lotuspsychje | 07:56 |
| Dr-007 | why is the Kubuntu mobile deprecated? other then people werent contributing anymore | 08:01 |
| Dr-007 | ooh kubuntu is way prettier then mate | 08:04 |
| Dr-007 | but perhabs not prettier then gnome | 08:05 |
| Dr-007 | oh well, installing! | 08:05 |
| fabio_ | salve a tutti | 08:08 |
| fabio_ | ho una lan fatta con router sitecom | 08:08 |
| fabio_ | ed una pennetta usb wifi con la quale vado in internet | 08:08 |
| ThinkT510 | !it | 08:08 |
| ubottu | Vai su #ubuntu-it se vuoi parlare in italiano, in questo canale usiamo solo l'inglese. Grazie! (per entrare, scrivi « /join #ubuntu-it » senza virgolette) | 08:08 |
| knightwise | morning everyone | 08:25 |
| ThinkT510 | greetings knightwise | 08:25 |
| lotuspsychje | Dr-007: its now plasma mobile, https://www.plasma-mobile.org there's also still a #ubports community with ubuntu mobile aswell | 08:29 |
| KBar | Didn't they rename it to Lomiri? | 08:30 |
| lotuspsychje | oh yeah seems like it KBar | 08:31 |
| lotuspsychje | or maybe its unity8 lomiri and ubports a fork of it? | 08:32 |
| KBar | Everything is a fork! | 08:35 |
| lotuspsychje | hehe | 08:36 |
| === denningsrogue6 is now known as denningsrogue | ||
| === diskin is now known as Guest7056 | ||
| === diskin_ is now known as diskin | ||
| === DynamiteDan_ is now known as DynamiteDan | ||
| cbreak | has https://bugs.launchpad.net/ubuntu/+source/zfs-linux/+bug/1906476 been fixed in 21.10 by now? | 10:54 |
| ubottu | Launchpad bug 1906476 in ubuntu-release-upgrader (Ubuntu Impish) "PANIC at zfs_znode.c:335:zfs_znode_sa_init() // VERIFY(0 == sa_handle_get_from_db(zfsvfs->z_os, db, zp, SA_HDL_SHARED, &zp->z_sa_hdl)) failed" [Undecided, Confirmed] | 10:54 |
| cbreak | still not sure if I should risk an upgrade from 21.04 yet | 10:55 |
| mihaiadrian | hi, i use xbindkeys / xautomation to set my right-click button on the mouse to an auxiliary button on the mouse (thumb button). | 11:12 |
| mihaiadrian | here is my .xbindkeysrc file: https://pastebin.com/raw/xMBmTizY | 11:12 |
| mihaiadrian | i have no idea why is it not working. | 11:12 |
| oerheks | i have no idea why you are crossposting? | 11:13 |
| imi | is there a way to toggle from commandline wheter the screen locks when it gets dimmed/turned off due to inactivity? | 11:45 |
| EriC^^ | imi: there should be something in gsettings, try "gsettings list-recursively | grep -E "lock|screen"" | 11:47 |
| NeoFrontier | Hello, is there a way to get the 'grep' command to display the amount of files searched so far while it is busy doing the search ? | 11:48 |
| NeoFrontier | Thanks betlegese . | 11:48 |
| EriC^^ | imi: maybe gsettings set org.gnome.desktop.screensaver lock-enabled false , not sure if it would affect other stuff such as suspend or ctrl+alt+l or what, try it and see | 11:52 |
| morgoth_bauglir | how do you open a new tab for dming a user in hexchat? | 12:04 |
| deksar | Hi there. How can I run a command that will check all the files within a directory, and make a list of files that were CHANGED/Modified within 24 hours (a day), and then copy these files to an another folder? | 12:09 |
| oerheks | man ls = ls -llt | 12:12 |
| EriC^^ | deksar: find /path -mtime -1 -type f -exec cp {} /path/to/dir \; > /path/to/list | 12:25 |
| EriC^^ | deksar: note it could potentially overwrite files if they had the same name | 12:26 |
| heller | any idaas what broke my ddclient? | 12:30 |
| heller | WARNING: cannot connect to svc.joker.com:443 socket: IO::Socket::IP configuration failed | 12:31 |
| ads21 | Anyone able to help with apache and uptime-kuma install ? | 13:16 |
| moliendo | Hi, I have a problem with proprietary nvidia drivers. Whichever driver I use, it crashes for a while after opening a steam game. On the other hand, I don't encounter with any issues while using open-source driver in the same scenario. However, in this case, it doesn't work as good as the proprietary one (rendering issues). | 13:20 |
| moliendo | So I would be appreciated at least if you can guide me how to troubleshoot the problem. My graphical card is EVGA gtx 980 and the driver version is 495.44. | 13:21 |
| BluesKaj | 'Morning folks | 14:02 |
| === mihaiadrian1 is now known as mihaiadrian | ||
| === aaguhagegaooeg is now known as westor | ||
| === westor is now known as Guest179 | ||
| === Guest179 is now known as westor | ||
| avallac_h | Hi! Can somebody explain me how to run a command when certain package updates. I want something like alpm-hooks from Arch's pacman <https://man.archlinux.org/man/alpm-hooks.5>. Can dpkg/apt do something like this? | 15:42 |
| avallac_h | This looks similar to what I want: <https://www.cyberciti.biz/faq/debian-ubuntu-linux-hook-a-script-command-to-apt-get-upgrade-command/>. However, this method has major disadvantage: script will be executed on every update, but I only want this to happen when the certain package updates. | 15:42 |
| oerheks | avallac_h, something like DPkg::Post-Install-Pkgs ? https://askubuntu.com/questions/869219/how-can-i-run-a-script-after-a-specific-package-is-upgraded --- https://unix.stackexchange.com/questions/492697/cleaner-way-to-detect-if-a-particular-package-was-installed-in-apt-get-hook | 15:56 |
| avallac_h | oerheks: Very close, thanks. | 16:11 |
| no_gravity | Hello! I wonder how to set up a program that needs to run as root? gparted for example does this out of the box. I wonder how? | 16:24 |
| leftyfb | no_gravity: why? | 16:33 |
| no_gravity | leftyfb: Why why? | 16:33 |
| leftyfb | no_gravity: if you explain the exact scenario and details behind why you want to do this, we can better help you. There might be alternative solutions as well | 16:34 |
| no_gravity | Nah | 16:34 |
| ioria | considering also that there are a lot languages ... and each one has its method | 16:35 |
| no_gravity | Looks like one has to create a file in /usr/share/polkit-1/actions/ | 16:35 |
| ioria | one, yes | 16:35 |
| no_gravity | I made the .policy file and added a starter, but it does nothing. Is there a way to get an error output somehow? | 16:39 |
| new_guest_21 | Hello, I have a `perl` command related question (I use it instead of grep/awk for regex parsing). May I ask here? | 16:40 |
| ioria | no_gravity, test it from terminsl | 16:41 |
| no_gravity | ioria: "pkexec myapp"? That works. | 16:42 |
| no_gravity | But when I click the menu entry, nothing happens. | 16:42 |
| ioria | nope, without pkexec | 16:43 |
| no_gravity | Then it runs as the user which starts it. | 16:43 |
| no_gravity | Maybe I need to restart gnome to read the policy file? | 16:43 |
| lotuspsychje | new_guest_21: you can try the #linux channel or #programming if you like, if its non-ubuntu related | 16:45 |
| ioria | no_gravity, you can alt+f2 ,r, enter .... but if it works as normal user, the rule is ineffective | 16:45 |
| new_guest_21 | Thank you lotuspsychje will try there | 16:45 |
| no_gravity | ioria: alt+f2, r, enter does not do anything here. | 16:45 |
| ioria | no_gravity, so you are on wayland | 16:46 |
| no_gravity | ioria: I doubt that. | 16:46 |
| ioria | no_gravity, env | grep XDG_SESSION_TYPE | 16:46 |
| no_gravity | ioria: No output | 16:47 |
| ioria | no_gravity, env | grep -i XDG | 16:48 |
| no_gravity | ioria: No output | 16:48 |
| ioria | no_gravity, env | nc termbin.com 9999 | 16:48 |
| no_gravity | ioria: That looks like it would connect to the internet. | 16:48 |
| ioria | no_gravity, what 's ypour ubuntu ver and de ? | 16:49 |
| no_gravity | ioria: 20 + kde | 16:49 |
| ioria | ah, no idea ask in #kubuntu maybe | 16:49 |
| no_gravity | ioria: I don't use kubuntu. | 16:50 |
| no_gravity | But yeah, I'll ask there | 16:50 |
| ioria | ask in #kde, then | 16:50 |
| BinarySavior | i have a docker container running, how can i configure the container to start automatically after rebooting. should i set it up as a systemd service? | 16:50 |
| no_gravity | ioria: Yeh | 16:50 |
| no_gravity | BinarySavior: I would put a script that starts it in /etc/X11/Xsession.d/ | 16:51 |
| no_gravity | BinarySavior: echo "docker run mycontainer" > /etc/X11/Xsession.d/50-my-container.sh | 16:53 |
| TJ- | what happens if the display server isn't started? | 16:54 |
| orangepi | darova pacanu | 17:15 |
| orangepi | heloo | 17:16 |
| === jwinterm_wow is now known as jwinterm | ||
| cbreak | not sure how to read this: https://bugs.launchpad.net/ubuntu/+source/zfs-linux/+bug/1906476, apparently it has a "fix released", but then something called ubuntu kernel bot is threatening to remove the fix again | 18:27 |
| ubottu | Launchpad bug 1906476 in ubuntu-release-upgrader (Ubuntu Impish) "PANIC at zfs_znode.c:335:zfs_znode_sa_init() // VERIFY(0 == sa_handle_get_from_db(zfsvfs->z_os, db, zp, SA_HDL_SHARED, &zp->z_sa_hdl)) failed" [Undecided, Confirmed] | 18:27 |
| cbreak | and while I think the kernel in https://packages.ubuntu.com/impish/linux-image-generic is already newer than the one with the problem, I'm not sure if it's already safe | 18:27 |
| cbreak | the changelog seems unhelpful: http://changelogs.ubuntu.com/changelogs/pool/main/l/linux-meta/linux-meta_5.13.0.21.32/changelog | 18:28 |
| cbreak | apparently the only things the ubuntu peopole ever change in that package is version bumps | 18:28 |
| cbreak | ah, found it, seems it's listed here: http://changelogs.ubuntu.com/changelogs/pool/main/l/linux/linux_5.13.0-21.21/changelog | 18:29 |
| cbreak | let's see if it works :) | 18:34 |
| BCB | I'm trying to install certbot on Ubuntu 20 and the install is missing files. I can't seem to install configobj | 19:44 |
| BCB | do i need to install it from source? | 19:44 |
| BCB | i've installed python-configobj-doc python-configobj and I'm still getting an error | 19:45 |
| === eldritch_ is now known as eldritch | ||
| oerheks | BCB what guide do you follow? | 20:04 |
| oerheks | https://certbot.eff.org/instructions?ws=nginx&os=ubuntu-20 | 20:05 |
| oerheks | they give our snaps as preferred :-D | 20:05 |
| oerheks | and i think you need python3; python3-configobj and such? | 20:06 |
| mort | uhhh ports.ubuntu.com/ubuntu-ports/dists/focal-*/InRelease is not valid yet according to my raspberry pi | 20:14 |
| mort | according to 'date' it knows the right time, sat nov 13 20:15:00 | 20:15 |
| mort | nvm, weird, it worked now | 20:15 |
| mort | maybe I ran 'apt update' right before it got the right time from ntp | 20:16 |
| BCB | oerheks YES I followed that guide you referenced. | 20:29 |
| BCB | oerheks do I use pip/snap/apt to install dependencies?? | 20:32 |
| === diskin_ is now known as diskin | ||
| === diskin is now known as Guest3681 | ||
| === diskin_ is now known as diskin | ||
| === diskin is now known as Guest7952 | ||
| === diskin_ is now known as diskin | ||
| === shokohsc867 is now known as shokohsc86 | ||
| === jje2 is now known as jje | ||
| clarkk | apparmor is preventing an app from starting. Can someone help me fix it? I'm also concerned that the app is trying to "rmdir". What exactly is it trying to remove? I don't want it to remove the directory in named in the log. http://paste.debian.net/plainh/8f587fc3 | 22:37 |
| TJ- | clarkk: you'd need to ask the publisher of that snap | 22:39 |
| clarkk | ok, if we disregard that, how would I theoretically allow these actions? I can see the app listed in aa-status | 22:40 |
| clarkk | so it must have a profile, mustn't it? How can I locate that aa profile? | 22:40 |
| TJ- | clarkk: I don't know how snap manages the profiles but I think I saw or read recently they're someplace else than in /etc/apparmor.d/ | 22:42 |
| clarkk | I looked in there. That app isn't mentioned at all in any of the files in that directory | 22:42 |
| oerheks | https://snapcraft.io/tradingview | 22:43 |
| oerheks | snap list | 22:44 |
| oerheks | also, see in software > installed > snapname > permissions for more info | 22:44 |
| oerheks | in 21.10 it is in settings > applications | 22:45 |
| oerheks | "/media/zdata/zdocuments/" | 22:46 |
| clarkk | running df | grep tradingview output where it's installed | 22:47 |
| clarkk | oerheks, yes, https://snapcraft.io/tradingview is where I installed it from | 22:48 |
| clarkk | what does this mean? requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000 | 22:50 |
| clarkk | the app is installed in /dev/loop38 68608 68608 0 100% /snap/tradingview/9 | 22:53 |
| clarkk | I can't find any reference to apparmor in it tho | 22:54 |
| oerheks | i would report that snap, see the site | 22:57 |
| oerheks | it is beta, and prop blob | 22:57 |
| clarkk | thanks oerheks and TJ- . I think I know what the problem. Will report back in a bit | 23:07 |
| === internalsplit_of is now known as givemeyourpies | ||
Generated by irclog2html.py 2.7 by Marius Gedminas - find it at mg.pov.lt!