[01:19] <MrConorAE> hello, how do you get Windows 11 to replace the Secure Boot keys?
[01:20] <MrConorAE> i was trying Ubuntu off of a live usb, and it asked me to "install MOK", and I, not knowing what it meant and assuming it was part of a firmware update which my computer had done earlier, did it
[01:20] <MrConorAE> now most of my devices aren't working and File Explorer, Start and Settings won't open
[01:20] <MrConorAE> any help would be greatly appreciated
[01:21] <toddc> MrConorAE: boot a Windows disk and it will offer a repair option
[01:22] <MrConorAE> how do you make a windows disk?
[01:22] <MrConorAE> Windows 11 is installed on the SSD, but do you mean a recovery USB?
[01:23] <toddc> either will work 1 sec looking for address
[01:24] <MrConorAE> the laptop still boots from the SSD, but no repair option is available
[01:24] <MrConorAE> even holding SHIFT and clicking Restart to get to recovery options doesn't work, my computer just reboots normally
[01:24] <MrConorAE> it's a Lenovo, if that helps
[01:24] <toddc> https://www.microsoft.com/software-download/windows11 from a working windows this makes a usb boot disk with the repair option
[01:25] <mybalzitch> windows official documentation now says you have to interrupt the reboot process like 3 times to get the repair options
[01:25] <mybalzitch> so forcefully power it off when the pinwheel shows up
[01:25] <MrConorAE> mybalzitch: i'll try that
[01:26] <toddc> mybalzitch: good to know thanks
[01:26] <MrConorAE> toddc: so then I boot from that, and ask it to repair?
[01:26] <Peter1> Hello which is the correct extension for a sha 256 checksum on ubuntu sha256 like on windows or sha2-256 or sha256sum or sha2 or something else entierly?
[01:26] <toddc> yes it should see that windows 11 was installed and offer up a repair option
[01:27] <MrConorAE> mybalzitch: interrupting now
[01:29] <MrConorAE> oh - it said "preparing automatic repair" then proceeded to reboot again and appeared to boot normally
[01:29] <MrConorAE> what :/
[01:29] <MrConorAE> also, every time it boots it flashes a message saying "please wait while we install a system update" with the Lenovo logo - is that something I should be worried about?
[01:30] <MrConorAE> mybalzitch: nope, still booting to windows
[01:30] <MrConorAE> ima go make a recovery USB now
[01:31] <MrConorAE> let me know if you think of anything else :/
[01:31] <TJ-> Peter1: Linux doesn't rely/bother about file extensions, it can be anything
[01:33] <Peter1> To go to repair options on windows hold Shift while restarting from the Power menu and it should show you the repair options after the restart.
[01:38] <Peter1> Thank you for the answer.
[01:49] <Peter1> Thought which is the most common extension for a sha 256 hash then? If any is used.
[01:53] <TJ-> Peter1: the archive doesn't use an extension. it calls the file SHA256SUMS
[01:54] <MrConorAE> Peter1: that doesn't work
[01:54] <MrConorAE> my computer just reboots normally if i try
[01:59] <Peter1> MrConorAE Then sorry i have only windows 10 and there holding the shift key and pressing restart in the power menu works.
[02:01] <Peter1> TJ- Thank you for the answer.
[02:03] <Peter1> MrConorAE That is holding it before i press restart and until it starts rebooting.
[02:04] <MrConorAE> Peter1: Yes, I've tried that: my computer just says "Please wait" and then reboots normally.
[02:09] <Peter1> MrConorAE What about trying the other methods as described here: https://www.minitool.com/news/advanced-options-windows-10-009.html
[02:09] <MrConorAE> toddc: i have a "repair your computer" link, but on the recovery screen that follows there is no "reset" option
[02:25] <Peter1> What about the methods here: https://www.dell.com/support/kbdoc/en-bs/000147155/booting-to-the-advanced-startup-options-menu-in-windows-10
[02:25] <Peter1> https://pureinfotech.com/access-advanced-startup-options-windows-11/
[02:25] <Peter1> https://thegeekpage.com/how-to-boot-into-advanced-startup-mode-in-windows-11/
[02:25] <Peter1> https://gearupwindows.com/how-to-access-windows-11-boot-advanced-options-menu/?amp=1
[02:27] <TJ-> MrConorAE: if you've added Machine Owners Keys, you can clear those from the motherboard's firmware setup options
[02:28] <TJ-> If you're doing a Windows recovery this should really be moved to #windows, this channel is for Ubuntu issues
[02:36] <riboczki> Evening to you all
[02:53] <MrConorAE> TJ-: yea i tried clearing them but that didn't help
[02:54] <MrConorAE> i'll move, thanks for all the help toddc , Peter1 and mybalzitch
[03:06] <smury> s
[03:59] <jcbjoe2021> guys here is my situation. im getting a gift card from amazon for a unreparable mac computer i sent them the budget is $1,444 im looking for something that just works out of the box. i can configure and do stuff later i just want to be up and running. i was advised about some thinkpads. what do you guys recommend? they have to be from amazon
[03:59] <lotuspsychje> !hardware | jcbjoe2021
[04:00] <lotuspsychje> jcbjoe2021: most machines work with ubuntu pretty good, maybe to avoid some chipsets like realtek
[04:00] <lotuspsychje> jcbjoe2021: lenovo's might give some acpi issues a lot too
[04:00] <jcbjoe2021> ok
[04:01] <lotuspsychje> jcbjoe2021: in general we cant say a brand works right out of the box for every hardware part inside
[04:01] <jcbjoe2021> lotuspsychje: i noticed thinkpads aren't on the hardware support
[04:02] <lotuspsychje> jcbjoe2021: a lot of brands will work like a charm, even without them showing on the hardware wiki
[04:02] <jcbjoe2021> got it
[04:03] <lotuspsychje> jcbjoe2021: amd cpu/gpu's might also need higher kernel fiddling
[04:04] <Kilroy> a friend who got ubuntu working on a thinkpad (I am like 80% sure it was a thinkpad)
[04:04] <TJ-> jcbjoe2021: I have 6 Lenovo E495s, no problems at all with Linux, and Ryzen 7
[04:04] <jcbjoe2021> TJ-: let me see if amazon has that model
[04:05] <jcbjoe2021> TJ-: are those old models?
[04:05] <TJ-> jcbjoe2021: April 2020
[04:06] <lotuspsychje> TJ-: wich release are you running on those
[04:07] <TJ-> lotuspsychje: Debian bullseye, Ubuntu 20.04
[04:07] <lotuspsychje> stock kernel or hwe?
[04:07] <jcbjoe2021> TJ-: Lenovo ThinkPad E495 14" Full HD Laptop, AMD Ryzen 5 3500U, 8GB Memory, 256GB SSD, Windows 10 Pro ?
[04:07] <TJ-> lotuspsychje: any is fine, but I build our own so 5.15 currenty
[04:08] <lotuspsychje> ah cool TJ-
[04:08] <TJ-> jcbjoe2021: they were available without windows on when I bought
[04:08] <jcbjoe2021> nice TJ-
[04:09] <TJ-> I popped out the 8GiB and put 32GiB in. What is nice they're a space space for an additional 2.5" SATA device
[04:09] <TJ-> um, my typing!  ... they've a spare space ...
[04:10] <jcbjoe2021> TJ-: i'll do some research on them, will get gift certificate later this week im guessing or next week
[04:10] <jcbjoe2021> Thanks
[04:10] <Guest57> hi i have a problem is this the right place to ask it?
[04:10] <TJ-> jcbjoe2021: there may be some more recent releases with basically the same configuration
[04:11] <hell_fire> hi um..i have a question
[04:11] <hell_fire> my ubuntu is detecting only 1 cpu out of 4
[04:11] <hell_fire> while o windows it is detecting all 4
[04:12] <hell_fire> on*
[04:12] <hell_fire> i recetly installed windows and got this problem
[04:12] <hell_fire> any help?
[04:12] <TJ-> hell_fire: how are you determining there is only 1 ?
[04:13] <Menzador> Do [ cat /proc/cpuinfo | grep "cpu cores" | uniq ]
[04:13] <hell_fire> well inxi -Fxxx , system moniter , lscpu say only 1 cpu core working
[04:13] <hell_fire> Menzador: cpu cores	: 1
[04:13] <TJ-> hell_fire: anything on the kernel command-line restricting them? "cat /proc/cmdline"
[04:13] <Menzador> ^
[04:13] <hell_fire> BOOT_IMAGE=/boot/vmlinuz-5.13.0-21-generic root=UUID=fc5c9aa2-da43-46ad-a04a-02f2b965605c ro quiet splash noapic nolapic vt.handoff=7
[04:13] <hell_fire> got this back
[04:14] <TJ-> hell_fire: do you know why you have "noapic nolapic" ?
[04:15] <hell_fire> i've heard it and tried that but i didn't knew it was working
[04:15] <TJ->  hell_fire  can you share the kernel log? "journalctl -k | nc termbin.com 9999 "
[04:15] <hell_fire> okay
[04:16] <hell_fire> https://termbin.com/ao16i
[04:16] <TJ-> noapic/nolapic == no Advanced (local) programmable interrupt controller
[04:16] <hell_fire> ah!
[04:17] <hell_fire> so thats the problem?
[04:17] <Menzador> In a word, yes
[04:17] <hell_fire> i used boot repair too cause the grub menu was not showing up
[04:17] <hell_fire> Menzador: ah so how do i fix it?
[04:17] <TJ-> "smpboot: SMP disabled"
[04:18] <hell_fire> ah there's the problem!
[04:18] <Menzador> Find the GRUB_CMDLINE_LINUX_DEFAULT line in /etc/default/grub, delete the "noapic" and "nolapic" options, save and close your editor, and run [ sudo update-grub ]
[04:18] <hell_fire> okay
[04:20] <Menzador> Reboot and see what happens. I'd suggest taking out "quiet" and "splash" options as well to see if it spits out any errors while loading
[04:21] <hell_fire> Menzador: okay
[04:22] <Dr-007> hello. im running 2 vnc servers on my desktop. 1 connects to the actual screen and the other 1 connects to a virtual desktop. ive set it up with Xvfb as follow: https://paste.ubuntu.com/p/vTfGh8pGzm/
[04:22] <Dr-007> my 'problem' is that its a basic slimmed down GUI of ubuntu that is started. and when i try to start chrome it loads for a little while and then just quits without error
[04:23] <hell_fire> Menzador: i'll brb rebooting
[04:23] <Dr-007> is there a way to start the more complex/full GUI of ubuntu?
[04:24] <Menzador> Dr-007: Do you have a terminal running in your VNC session?
[04:24] <Menzador> And, what DE do you normally use?
[04:25] <tomreyn> and which ubuntu release are you using?
[04:26] <Dr-007> i started on in the vnc session, i can start it again.
[04:26] <Dr-007> Linux server 5.13.0-21-generic #21-Ubuntu SMP Tue Oct 19 08:59:28 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux
[04:28] <Dr-007> i changed the line `sudo DISPLAY=:3 gnome-session &` from gnome-session to 'DISPLAY=:3 gnome-shell &'
[04:28] <Dr-007> so without sudo and gnome-shell..
[04:28] <Dr-007> loads the gui the same
[04:28] <Dr-007> and wierdly i am root
[04:29] <hell_fire> i'm back
[04:29] <hell_fire> it worked!
[04:29] <hell_fire> but...
[04:29] <Menzador> Get your butt out of the way... :P
[04:29] <hell_fire> i had the edit the bot options myself on booting...
[04:29] <hell_fire> Menzador: :P
[04:30] <Menzador> You didn't save /etc/default/grub ?
[04:30] <hell_fire> i did
[04:30] <ravage> and run update-grub?
[04:30] <Menzador> ^
[04:31] <hell_fire> nope
[04:31] <hell_fire> ah lol
[04:31] <hell_fire> my bad
[04:31] <hell_fire> sorry!
[04:31] <tomreyn> you also seemed to have missed this:   hell_fire: do you know why you have "noapic nolapic" ?
[04:32] <tomreyn> it's not there by default, so you would have added that at some point
[04:32] <tomreyn> maybe to work around another problem?
[04:32] <hell_fire> tomreyn: yeah i tried that wayy before i installed windows, that was because some updates were not acting correct.. i think
[04:32] <hell_fire> tomreyn: yea i did that
[04:33] <tomreyn> if you want to post a system log to have that checked for remaining issues:  journalctl -b | nc termbin.com 9999
[04:34] <hell_fire> okie wait
[04:35] <hell_fire> https://termbin.com/dn3la
[04:39] <tomreyn> hell_fire: is this a satellite "C650 Pro" or "C650D Pro", or one of those but without the "Pro"?
[04:40] <tomreyn> it should say on the bottom, if you want to check
[04:40] <hell_fire> its just satellite c640
[04:40] <tomreyn> oh 640 sorry
[04:40] <hell_fire> yesh
[04:40] <hell_fire> :)
[04:40] <hell_fire> anyways thanks again Menzador tomreyn and TJ-
[04:41] <Menzador> hell_fire: yw! (and, you can re-add the "quiet" and "splash" options if you had them before)
[04:42] <hell_fire> okay but is it really required?
[04:42] <tomreyn> hell_fire: if you want to update the bios (yours says it is version 1.00 (built 04/01/2011), so probably the first they ever did): https://support.dynabook.com/support/modelHome?freeText=1200012177&osId=3333728
[04:42] <hell_fire> oh? i didn't knew how to update the bios
[04:43] <Menzador> hell_fire: Nope, it just makes it look prettier. Whether or not you want dmesg and systemd scrolling across the screen is up to you
[04:43] <hell_fire> oh
[04:43] <hell_fire> i'll try that but on that link it only shows windoe\ws operating systems
[04:44] <hell_fire> windows
[04:46] <hell_fire> also my model number is not there in that link
[04:47] <tomreyn> hell_fire: It says "Satellite (Pro) C640"
[04:48] <tomreyn> actually without "(Pro)"
[04:48] <tomreyn> but when you click the bios link on the bottom it does
[04:48] <tomreyn> but this "(pro)" apparently means that it works for both
[04:49] <tomreyn> you could check the specific model number: PSC00C-01U00P should be printed on the bottom of your laptop
[04:49] <hell_fire> thats not my odel number
[04:49] <tomreyn> so which is yours?
[04:49] <hell_fire> it psc2ug
[04:49] <tomreyn> the log looks fine, though, so i guess there's no need to upgrade bios
[04:49] <hell_fire> oh okay
[04:50] <hell_fire> then after upgrade there won't be any new options in bios??
[04:51] <tomreyn> maybe, maybe not, i don't know.
[05:05] <Guest68> is there a way to be notified if a script is run?
[05:11] <tomreyn> Guest68: there are commands you can run to provide some notification on your graphical desktop. you could send emails, or similar.
[05:13] <Guest68> i don't mean my own script, i mean like, if a script in such and such system folder runs due to some automatic thing
[05:17] <tomreyn> Guest68: this probably needs more context, but it already seems like you would better edit the script itself.
[05:17] <tomreyn> (or whatever runs the script)
[05:17] <tomreyn> whihch ubuntu version and software is this about?
[05:18] <Guest68> i think some of them are python bytecode, but im not sure
[05:19] <Guest68> lts
[06:17] <Dr-007> what desktop manager/sessions are there? ive now got gnome and mate installed
[06:18] <lotuspsychje> !flavours | Dr-007
[06:52] <immuda> hello
[06:53] <immuda> lotuspsychje, hello
[07:02] <tomreyn> hi immuda, do you have an ubuntu support question?
[07:15] <immuda> no tomreyn just logged in
[07:46] <nurul> hi
[07:56] <Dr-007> thanks lotuspsychje
[08:01] <Dr-007> why is the Kubuntu mobile deprecated? other then people werent contributing anymore
[08:04] <Dr-007> ooh kubuntu is way prettier then mate
[08:05] <Dr-007> but perhabs not prettier then gnome
[08:05] <Dr-007> oh well, installing!
[08:08] <fabio_> salve a tutti
[08:08] <fabio_> ho una lan fatta con router sitecom
[08:08] <fabio_> ed una pennetta usb wifi con la quale vado in internet
[08:08] <ThinkT510> !it
[08:25] <knightwise> morning everyone
[08:25] <ThinkT510> greetings knightwise
[08:29] <lotuspsychje> Dr-007: its now plasma mobile, https://www.plasma-mobile.org there's also still a #ubports community with ubuntu mobile aswell
[08:30] <KBar> Didn't they rename it to Lomiri?
[08:31] <lotuspsychje> oh yeah seems like it KBar
[08:32] <lotuspsychje> or maybe its unity8 lomiri and ubports a fork of it?
[08:35] <KBar> Everything is a fork!
[08:36] <lotuspsychje> hehe
[10:54] <cbreak> has https://bugs.launchpad.net/ubuntu/+source/zfs-linux/+bug/1906476 been fixed in 21.10 by now?
[10:55] <cbreak> still not sure if I should risk an upgrade from 21.04 yet
[11:12] <mihaiadrian> hi, i use xbindkeys / xautomation to set my right-click button on the mouse to an auxiliary button on the mouse (thumb button).
[11:12] <mihaiadrian> here is my .xbindkeysrc file: https://pastebin.com/raw/xMBmTizY
[11:12] <mihaiadrian> i have no idea why is it not working.
[11:13] <oerheks> i have no idea why you are crossposting?
[11:45] <imi> is there a way to toggle from commandline wheter the screen locks when it gets dimmed/turned off due to inactivity?
[11:47] <EriC^^> imi: there should be something in gsettings, try "gsettings list-recursively | grep -E "lock|screen""
[11:48] <NeoFrontier> Hello, is there a way to get the 'grep' command to display the amount of files searched so far while it is busy doing the search ?
[11:48] <NeoFrontier> Thanks betlegese .
[11:52] <EriC^^> imi: maybe gsettings set org.gnome.desktop.screensaver lock-enabled false  , not sure if it would affect other stuff such as suspend or ctrl+alt+l or what, try it and see
[12:04] <morgoth_bauglir> how do you open a new tab for dming a user in hexchat?
[12:09] <deksar> Hi there. How can I run a command that will check all the files within a directory, and make a list of files that were CHANGED/Modified within 24 hours (a day), and then copy these files to an another folder?
[12:12] <oerheks> man ls = ls -llt
[12:25] <EriC^^> deksar: find /path -mtime -1 -type f -exec cp {} /path/to/dir \; > /path/to/list
[12:26] <EriC^^> deksar: note it could potentially overwrite files if they had the same name
[12:30] <heller> any idaas what broke my ddclient?
[12:31] <heller> WARNING:  cannot connect to svc.joker.com:443 socket: IO::Socket::IP configuration failed
[13:16] <ads21> Anyone able to help with apache and uptime-kuma install ?
[13:20] <moliendo> Hi, I have a problem with proprietary nvidia drivers. Whichever driver I use, it crashes for a while after opening a steam game. On the other hand, I don't encounter with any issues while using open-source driver in the same scenario. However, in this case, it doesn't work as good as the proprietary one (rendering issues).
[13:21] <moliendo> So I would be appreciated at least if you can guide me how to troubleshoot the problem. My graphical card is EVGA gtx 980 and the driver version is 495.44.
[14:02] <BluesKaj> 'Morning folks
[15:42] <avallac_h> Hi! Can somebody explain me how to run a command when certain package updates. I want something like alpm-hooks from Arch's pacman <https://man.archlinux.org/man/alpm-hooks.5>. Can dpkg/apt do something like this?
[15:42] <avallac_h> This looks similar to what I want: <https://www.cyberciti.biz/faq/debian-ubuntu-linux-hook-a-script-command-to-apt-get-upgrade-command/>. However, this method has major disadvantage: script will be executed on every update, but I only want this to happen when the certain package updates.
[15:56] <oerheks> avallac_h, something like DPkg::Post-Install-Pkgs ? https://askubuntu.com/questions/869219/how-can-i-run-a-script-after-a-specific-package-is-upgraded --- https://unix.stackexchange.com/questions/492697/cleaner-way-to-detect-if-a-particular-package-was-installed-in-apt-get-hook
[16:11] <avallac_h> oerheks: Very close, thanks.
[16:24] <no_gravity> Hello! I wonder how to set up a program that needs to run as root? gparted for example does this out of the box. I wonder how?
[16:33] <leftyfb> no_gravity: why?
[16:33] <no_gravity> leftyfb: Why why?
[16:34] <leftyfb> no_gravity: if you explain the exact scenario and details behind why you want to do this, we can better help you. There might be alternative solutions as well
[16:34] <no_gravity> Nah
[16:35] <ioria> considering also that there are a lot languages ... and each one has its method
[16:35] <no_gravity> Looks like one has to create a file in /usr/share/polkit-1/actions/
[16:35] <ioria> one, yes
[16:39] <no_gravity> I made the .policy file and added a starter, but it does nothing. Is there a way to get an error output somehow?
[16:40] <new_guest_21> Hello, I have a `perl` command related question (I use it instead of grep/awk for regex parsing). May I ask here?
[16:41] <ioria> no_gravity, test it from terminsl
[16:42] <no_gravity> ioria: "pkexec myapp"? That works.
[16:42] <no_gravity> But when I click the menu entry, nothing happens.
[16:43] <ioria> nope, without pkexec
[16:43] <no_gravity> Then it runs as the user which starts it.
[16:43] <no_gravity> Maybe I need to restart gnome to read the policy file?
[16:45] <lotuspsychje> new_guest_21: you can try the #linux channel or #programming if you like, if its non-ubuntu related
[16:45] <ioria> no_gravity, you can alt+f2 ,r, enter .... but if it works as normal user, the rule is ineffective
[16:45] <new_guest_21> Thank you lotuspsychje will try there
[16:45] <no_gravity> ioria: alt+f2, r, enter does not do anything here.
[16:46] <ioria> no_gravity, so you are on wayland
[16:46] <no_gravity> ioria: I doubt that.
[16:46] <ioria> no_gravity, env | grep XDG_SESSION_TYPE
[16:47] <no_gravity> ioria: No output
[16:48] <ioria> no_gravity, env | grep -i XDG
[16:48] <no_gravity> ioria: No output
[16:48] <ioria> no_gravity, env | nc termbin.com 9999
[16:48] <no_gravity> ioria: That looks like it would connect to the internet.
[16:49] <ioria> no_gravity, what 's ypour ubuntu ver and de ?
[16:49] <no_gravity> ioria: 20 + kde
[16:49] <ioria> ah, no idea ask in #kubuntu maybe
[16:50] <no_gravity> ioria: I don't use kubuntu.
[16:50] <no_gravity> But yeah, I'll ask there
[16:50] <ioria> ask in #kde, then
[16:50] <BinarySavior> i have a docker container running, how can i configure the container to start automatically after rebooting.  should i set it up as a systemd service?
[16:50] <no_gravity> ioria: Yeh
[16:51] <no_gravity> BinarySavior: I would put a script that starts it in /etc/X11/Xsession.d/
[16:53] <no_gravity> BinarySavior: echo "docker run mycontainer" > /etc/X11/Xsession.d/50-my-container.sh
[16:54] <TJ-> what happens if the display server isn't started?
[17:15] <orangepi> darova pacanu
[17:16] <orangepi> heloo
[18:27] <cbreak> not sure how to read this: https://bugs.launchpad.net/ubuntu/+source/zfs-linux/+bug/1906476, apparently it has a "fix released", but then something called ubuntu kernel bot is threatening to remove the fix again
[18:27] <cbreak> and while I think the kernel in https://packages.ubuntu.com/impish/linux-image-generic is already newer than the one with the problem, I'm not sure if it's already safe
[18:28] <cbreak> the changelog seems unhelpful: http://changelogs.ubuntu.com/changelogs/pool/main/l/linux-meta/linux-meta_5.13.0.21.32/changelog
[18:28] <cbreak> apparently the only things the ubuntu peopole ever change in that package is version bumps
[18:29] <cbreak> ah, found it, seems it's listed here: http://changelogs.ubuntu.com/changelogs/pool/main/l/linux/linux_5.13.0-21.21/changelog
[18:34] <cbreak> let's see if it works :)
[19:44] <BCB> I'm trying to install certbot on Ubuntu 20 and the install is missing files.  I can't seem to install configobj
[19:44] <BCB> do i need to install it from source?
[19:45] <BCB> i've installed python-configobj-doc python-configobj and I'm still getting an error
[20:04] <oerheks> BCB what guide do you follow?
[20:05] <oerheks> https://certbot.eff.org/instructions?ws=nginx&os=ubuntu-20
[20:05] <oerheks> they give our snaps as preferred :-D
[20:06] <oerheks> and i think you need python3;  python3-configobj and such?
[20:14] <mort> uhhh ports.ubuntu.com/ubuntu-ports/dists/focal-*/InRelease is not valid yet according to my raspberry pi
[20:15] <mort> according to 'date' it knows the right time, sat nov 13 20:15:00
[20:15] <mort> nvm, weird, it worked now
[20:16] <mort> maybe I ran 'apt update' right before it got the right time from ntp
[20:29] <BCB> oerheks YES I followed that guide you referenced.
[20:32] <BCB> oerheks do I use pip/snap/apt to install dependencies??
[22:37] <clarkk> apparmor is preventing an app from starting. Can someone help me fix it?  I'm also concerned that the app is trying to "rmdir".  What exactly is it trying to remove?  I don't want it to remove the directory in named in the log.  http://paste.debian.net/plainh/8f587fc3
[22:39] <TJ-> clarkk: you'd need to ask the publisher of that snap
[22:40] <clarkk> ok, if we disregard that, how would I theoretically allow these actions?  I can see the app listed in aa-status
[22:40] <clarkk> so it must have a profile, mustn't it?  How can I locate that aa profile?
[22:42] <TJ-> clarkk: I don't know how snap manages the profiles but I think I saw or read recently they're someplace else than in /etc/apparmor.d/
[22:42] <clarkk> I looked in there. That app isn't mentioned at all in any of the files in that directory
[22:43] <oerheks> https://snapcraft.io/tradingview
[22:44] <oerheks> snap list
[22:44] <oerheks> also, see in software > installed > snapname > permissions for more info
[22:45] <oerheks> in 21.10 it is in settings > applications
[22:46] <oerheks> "/media/zdata/zdocuments/"
[22:47] <clarkk> running df | grep tradingview  output where it's installed
[22:48] <clarkk> oerheks, yes, https://snapcraft.io/tradingview is where I installed it from
[22:50] <clarkk> what does this mean?  requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[22:53] <clarkk> the app is installed in /dev/loop38        68608     68608         0 100% /snap/tradingview/9
[22:54] <clarkk> I can't find any reference to apparmor in it tho
[22:57] <oerheks> i would report that snap, see the site
[22:57] <oerheks> it is beta, and prop blob
[23:07] <clarkk> thanks oerheks and TJ- .  I think I know what the problem. Will report back in a bit