=== guiverc2 is now known as guiverc | ||
Ricardus | So I installed US on a Lenovo laptop 5 or 6 months ago, and everything worked fine, and then after an update, not sure which one, the audio through my Scarlett 2i2 sound chirpy and distorted. | 15:55 |
---|---|---|
Eickmeyer | Scarletts can be picky on Linux, but not impossible. I don't own one. Unfortunately, you'll probably not get much help here. | 16:13 |
Eickmeyer | !morehelp | Ricardus | 16:13 |
ubottu | Ricardus: #ubuntustudio sometimes cannot answer your questions in a timely matter, or simply lacks the capacity. For additional sources of help, try #ubuntu if your issue is of a technical nature, or #lau (Linux Audio Users) or #opensourcemusicians if it has to do with the audio stack. | 16:13 |
Ricardus | If I unplug the interface and just listen through the laptop speaker or earbuds with the 1/8th jack it sounds fine. THis happens when I used a regular media player like audacious, or when I opened an Ardour or Mixbus session as well running JACK | 16:14 |
Ricardus | eickmeyer it was working like a week ago. Thats the weird thing | 16:15 |
Eickmeyer | Ricardus: It's hard to know what changed as we don't maintain every part of the system, most of it is done by Canonical or other parts of Ubuntu. | 16:16 |
Eickmeyer | I highly suggest you check those channels since they might actually have similar hardware. | 16:16 |
OvenWerks | I would expect that is either kernel or alsa... unless there is a firmware dl for that unit. | 16:17 |
OvenWerks | Ricardus: have you tried booting with an older kernel that may still be installed? | 16:18 |
Ricardus | Its frustating since it was working not long ago. | 16:18 |
Ricardus | OvenWerks, I can try that | 16:18 |
OvenWerks | very | 16:18 |
Ricardus | I also might have a mastering gig in a week and I need a working machine. :-) | 16:19 |
Ricardus | I'll ask in those other channels as well. | 16:19 |
Ricardus | OvenWerks, I'll try the previous kernel in a bit and let you know | 16:20 |
OvenWerks | ok | 16:20 |
Ricardus | OvenWerks, isn't holding shift down supposed to give me the GRUB menu? | 16:38 |
Ricardus | when booting? | 16:38 |
Eickmeyer | Ricardus: Either left shift or right shift, depending on hardware. Or interrupt the boot process by forcing a reset can force it to appear on the next try. | 16:43 |
Ricardus | eickmeyer neither shift worked. | 16:47 |
Eickmeyer | Ricardus: It's about timing. Some hardware won't detect your shift key if it's held down during the initial boot, but will once the boot screen shows. It can be tricky. | 16:50 |
Eickmeyer | Unfortunately, that's the only way to get Grub to show short of doing the mid-boot reset trick, which isn't recommended. | 16:50 |
Ricardus | eickmeyer ok, thanks | 16:50 |
=== oerheks_ is now known as oerheks |
Generated by irclog2html.py 2.7 by Marius Gedminas - find it at mg.pov.lt!