[01:59] <loganlee[gnu]> can i upgrade from Ubuntu 20.04.1 LTS  to Ubuntu 22.04 LTS?
[02:00] <lotuspsychje> !ltsupgrade | loganlee[gnu]
[02:00] <lotuspsychje> the users choice to upgrade now or await 22.04.1 loganlee[gnu]
[02:01] <loganlee[gnu]> will it fill my hard drive with redundant files from earlier release?
[02:04] <lotuspsychje> loganlee[gnu]: upgrades take over your existing /home if thats what you mean?
[02:06] <loganlee[gnu]> not files in /home but like files from the earlier distro when fresh installed
[02:10] <lotuspsychje> loganlee[gnu]: upgrades also respect your installed apps & configs, however its always prudent to make backups and read the questions carefully during upgrade process
[02:11] <loganlee[gnu]> hmmmmm kind of tricky thinking about it... it will upgrade nearly all packages
[02:11] <lotuspsychje> loganlee[gnu]: like some apps wont be default in the next release and might uninstall, so its adviced to see the !jammy releasenotes first before upgrading
[02:11] <loganlee[gnu]> !jammy
[02:11] <jhutchins> loganlee[gnu]: When you do an upgrade, the files from the new packages replace the files from the old, so it doesn't take much more space than the previous install.
[02:12] <loganlee[gnu]> jhutchins: ok thx!
[02:12] <jhutchins> loganlee[gnu]: It's just like upgrading a single package with apt.
[02:15] <lotuspsychje> (if anything goes well)
[02:23] <jhutchins> loganlee[gnu]: Also true of a single upgrade.
[02:26] <cluelessperson> I'm struggling.
[02:26] <cluelessperson> my laptop's wifi is becoming unresponsive every few minutes
[02:26] <cluelessperson> or every minute
[02:26] <cluelessperson> I'm tearing my hair out.
[02:31] <jhutchins> cluelessperson: Start with which release you're on, specify what hardware you have, tell us what you've done so far to support it and to troubleshoot the problem.
[02:32] <jhutchins> cluelessperson: Verify that all external factors have been checked (Is the AP stable?  Is the signal good, steady, and consistent?)
[02:34] <cluelessperson> Ubuntu 22.04 LTS, Intel Wireless-AC 9560, 802.11ac Dual Band 2x2 Wi-Fi + Bluetooth 5.1
[02:34] <cluelessperson> jhutchins, yes the ap is stable
[02:34] <cluelessperson> it's the laptop
[02:34] <cluelessperson> I installed this new version of ubuntu
[02:34] <cluelessperson> wifi was slow in the past, but reliable
[02:34] <cluelessperson> it's faster now, but now unreliable.
[02:35] <jhutchins> What driver is it using?  Most intels use iwlwifi.
[02:35] <jhutchins> Any clues amid all the noise in dmesg or the journal?
[02:37] <jhutchins> I think the last intel I saw here was having trouble with DHCP, setting up a static configuration that bypassed NetworkManager fixed it.
[02:37] <cluelessperson> jhutchins, no clues that I see
[02:38] <cluelessperson> I don't think this is dhcp
[02:39] <jhutchins> You need to check for messages at the time it looses connection, see which service is taking it down (or reporting it).
[02:41] <cluelessperson> jhutchins, I didn't se anything
[02:54] <InPhase> quackgyver: Yeah, if it's intermittent and only certain keys, this is very unlikely to be a software problem.  But good luck in your efforts to resolve it.  I know it's frustrating to have such a basic part malfunctioning, rendering an entire computer hard to work with.
[02:55] <quackgyver> Thanks. :-)
[02:55] <quackgyver> I just rebooted and the key doesn't seem to be working.
[02:55] <quackgyver> It could still be a software issue though. I should test outside of Ubuntu. Perhaps in the BIOS, if possible.
[02:56] <cluelessperson> Can someone suggest a usb wifi adapter that doesn't require drivers that I can just plugin and be happy with on ubuntu?
[03:02] <loganlee[gnu]> cluelessperson: maybe just use dhcp?
[03:04] <rob0> Most USB wifi adapters should work just fine with Linux.
[03:05] <rob0> (At least all the ones I have tried, never a problem.  But you can always look up your device online.)
[03:06] <rob0> FWIW iwlwifi has always been stable for me.
[03:13] <cluelessperson> loganlee[gnu], dude, you need to learn what dhcp is. :P
[03:13] <loganlee[gnu]> it assigns the ip addr for you?
[03:14] <rob0> unless perhaps there is a failure in the NIC driver
[03:20] <InPhase> cluelessperson: Just hit up Amazon for the terms "usb", "wifi", "linux".  It's an easy find really, but you're better off going with the ones willing to explicitly list it as supported.
[03:21] <cluelessperson> InPhase, I don't like relying on bs marketing terms and con artists
[03:22] <InPhase> cluelessperson: Well, one needs to filter the reviews in the standard Amazon manner, going by score and then examining for authenticity and crossing out the ones with shady pattern reviews.  But it's a pretty reliable process when you go through it.
[03:23] <rob0> https://www.intel.com/content/www/us/en/support/articles/000005511/wireless.html
[03:27] <cluelessperson> InPhase, I'm hoping more for "here's a list of linux supported cards that work very very well"
[03:29]  * cluelessperson tries rob0 's link
[03:29] <rob0> I'm just saying, iwlwifi devices have always worked very well for me.
[03:31] <rob0> But the first one did have a firmware issue; upgrading firmware or the kernel fixed that.  (I don't know whether the kernel or the firmware fixed it, because I did both at the same time.)
[03:35] <InPhase> cluelessperson: I think most work well now, so it's probably a backwards direction at this stage.
[04:30] <loganlee[gnu]> !jammy
[05:50] <cluelessperson> I've just plugged in a usb wifi adapter
[05:50] <cluelessperson> how can I tell ubuntu to use that instead of the internal wifi?
[05:52] <oerheks> in 22.04 gnome, wifi in settings shows 2 adapters on the top panel..
[05:53] <cluelessperson> oh it came up
[05:53] <cluelessperson> and the option is there easily
[05:53] <cluelessperson> nice
[05:53] <cluelessperson> nvm
[05:54] <cluelessperson> okay, problem
[05:54] <cluelessperson> I can't turn off just one of them
[05:54] <cluelessperson> turning one off, turns them *both* off.
[05:54] <cluelessperson> oerheks, ^
[05:55] <oerheks> yes
[05:55] <oerheks> maybe in your bios, you can disable internal wifi?
[05:55] <oerheks> or blacklist it, comandline
[05:55] <respawn> have you tred turning it off and on again
[05:56] <BadAtom> or try removing the USB adapter, disabling the internal wifi, then reinsert the USB adapter
[05:57]  * cluelessperson does  ip link set thinga down
[05:57] <respawn> in theory it should show both adapters and give you option to connect from one or the other
[05:58] <respawn> try in terminal lsusb and see if the usb is detected
[06:00] <cluelessperson> I just disabled one with ip link
[08:08] <delluser> i'm on an 20.04 box that was provided to me by IT. I don't think they manage the packages on it but when i install snapd it keeps getting uninstalled and i have to apt-get it again to get it back
[08:08] <delluser> is there some process by which a package can get autoremoved like a denylist or something?
[08:14] <Saviq> delluser check `/var/log/apt` for what commands are being ran
[08:16] <delluser> thanks Saviq . that sheds some light on the issue
[08:16] <delluser> seems like there is a command being run by something i haven't done anyway... that does
[08:16] <delluser> /usr/bin/apt-get -y -q remove apparmor
[08:17] <delluser> periodically or so
[08:18] <delluser> well not periodically at all. some time after the snapd gets installed
[08:18] <Saviq> Fun one. I'd grep for it in `/etc`
[08:21] <delluser> no luck there. searched for remove apparmor and also scanned the output of grep for apparmor to see if i could spot anything
[08:22] <delluser> i'm thinking maybe i could write some wrapper for apt that spits out the parent process details or something sneaky
[08:22] <delluser> checked crontab as user and root aswell. no joy there
[09:18] <delluser> is there a way i can get the touchpad on my laptop to recognise a hold-down left-mouse just by touch rather than having to physically click the pad
[09:18] <delluser> for example i'm trying to use a scrollbar and i want to touch and scroll down but with this laptop i have to physically press the pad and scroll it...
[09:18] <delluser> do i have to install something like synaptics?
[09:32] <neuromance> can someone help me out on how can I permanently disable the power button power off / sleep functionallity
[09:32] <neuromance> I've tried poking all the way to systemd and still when I press the power button on the keyboard, it shuts down my machine to sleep
[09:33] <neuromance> tried setting the Ubuntu Desktop power options, tried adding the ignore switch to systemd settings, nothing works.
[09:37] <neuromance> proposed solutions that have been lingering around on i.e. askubuntu.com don't work; such as : gsettings set org.gnome.settings-daemon.plugins.power button-suspend "nothing"
[09:39] <arraybolt3> neuromance: Just a short press of the power button causes this? And does the system shut down normally, or does it just instantly die?
[09:44] <arraybolt3> neuromance: It looks like this is tricky to do on Ubuntu proper, but I know from experience it's quite easy on Lubuntu. I have Lubuntu running on an old Chromebook that put the power button where the delete key usually goes. Not fun. Thankfully, Lubuntu provides an option that lets you set the power key action to "Nothing", and on my system, it works.
[09:45] <neuromance> arraybolt3: yeah man I've tried asking professional Linux sysadmin/coder chats ....
[09:46] <neuromance> I mean it's probably _doable_ by i.e. remapping your keys or something equally crazy
[09:47] <neuromance> arraybolt3 , I've got Ubuntu 22.04 desktop and I've set the power setting of the power button to do nothing ...
[09:47] <arraybolt3> neuromance: Does this help? https://www.reddit.com/r/gnome/comments/qvqp1w/power_button_shuts_down_laptop_regardless_of/ I know it's for Arch Linux, but it's for the GNOME Desktop, which is what Ubuntu uses AFAIK.
[09:48] <arraybolt3> (It looks like he did something similar to what you did, but without the "button-suspend" bit.)
[09:49] <neuromance> that's archlinux tho ... let's see...
[09:49] <neuromance> kinda hilarious that something so trivial has been plaguing linux systems for so long
[09:49] <neuromance> or it _would_ be hilarious if accidentally pushing your keyboard's power button (that's on the very edge of it) wouldn't put your machine to sleep in a very unclean way
[09:50] <neuromance> I can't run the checklist because there's no 'libinput
[09:50] <neuromance> there's no 'libinput' on Ubuntu nor can it be installed.
[09:50] <neuromance> (via apt)
[09:50] <arraybolt3> neuromance: Can you install dconf-editor?
[09:51] <neuromance> oh yep, I'll take a look-see-- it's already installed
[09:52] <arraybolt3> neuromance: Navigate to org.gnome.settings-daemon.plugins.power, and then click the button next to "custom value". Then set that to "nothing" and see if that works.
[09:52] <neuromance> arraybolt3 thanks a lot, will try it out!
[09:53] <arraybolt3> neuromance: You may also have to use a hostnamectl tweak to make the setting work if that doesn't do the trick.
[09:53] <arraybolt3> neuromance: If the setting doesn't work, run "hostnamectl chassis laptop" in a terminal, then try again.
[09:54] <neuromance> I'm not running a laptop though
[09:54] <neuromance> I already had "power-button-action" set to 'nothing'
[09:56] <neuromance> ok, so now I've got both the lid-close -actions set to 'nothing' , as well as all the others
[09:57] <neuromance75> ok so that didn't work
[09:57] <neuromance75> unless I need to restart gnome
[10:00] <neuromance> yeah ... that didn't work.... *sigh*
[10:01] <neuromance> I've also set these in /etc/systemd/logind.conf : https://www.reddit.com/r/linux4noobs/comments/aem32x/how_to_turn_off_sleep_button_on_keyboard_for/
[10:05] <neuromance> arraybolt3 ok I think I found the solution ... which is to literally edit the keymaps; https://askubuntu.com/questions/362914/how-to-prevent-the-power-button-to-shutdown-directly-the-system <= as replied there
[10:05] <neuromance> arraybolt3 'xinput --list' and then edit the entries
[10:06] <supremekai> Hey guys, I have Ubuntu 20.04 and I remember to add a kind of "network folder" to access a VPS I have with Ubuntu OS... However, I don't remember how to add this folder which provides direct access to the SFTP of the VPS Server. How can I set up this folder?
[10:22] <neuromance> Edit the file : /usr/share/X11/xkb/symbols/inet (edit POWR key) <= I have no idea what the original author meant by that
[10:24] <neuromance>     key <POWR>   {      [ XF86PowerOff          ]       };
[10:30] <transhumanist> can I mirror cgroups with the bind command ? and where are they in ubuntu.. I mean use a command like mount -o bind ... ...
[10:40] <mort> for some reason, my whole desktop freezes for a few seconds while I'm dragging a glfw window
[11:04] <sem> Good <time of day greeting> everyone!
[11:05] <sem> Let's say for the sake of argument that I was planning to dual boot Ubuntu 22.04 LTS and Windows, and use the same "data drive" between them.
[11:06] <sem> Would it be better to put the data on the ext4 / partition, and r-w from windows using Paragon FS, or would it be better to have it on the NTFS C: drive and use ntfs-3g to r-w from linux?
[11:09] <delluser> in my experience mounting ntfs under linux is more reliable than mounting ext4 on windows but maybe your experience is different
[11:10] <sem> i haven't used ext4 on windows in a few years, but my experience has been similar
[11:11] <sem> I can't think of any specific examples though
[11:40] <BluesKaj> Hi all
[11:48] <Guest88> hello, I have a question/issue with networking after upgrade from 20.04 to 22.04
[11:49] <lotuspsychje> you can ask it here Guest88
[11:49] <Guest88> this is the first time I've had to understand/configure netplan / networkd
[11:50] <Guest88> lotuspsychje, thanks. basically, post upgrade>reboot, the computer no longer had a connection/IP
[11:50] <lotuspsychje> Guest88: maybe check; sudo lshw -C network and see if your network card has a driver active
[11:52] <Guest88> lotuspsychje, I manager to "assign" a static IP but I'm unclear on 3 things 1) why this happened 2) how to to get it to grab a dhcp4 ip again from my router (first thing I tried) 3) working again how to find out what else is wrong with the network configuration
[11:53] <lotuspsychje> is this is an ubuntu server Guest88 ?
[11:53] <Guest88> I'm thinking there must be some residual messed up config since this thing has been upgrade for years prior
[11:54] <Guest88> lotuspsychje, not really, it has a display manager and window manager
[11:54] <Guest88> lotuspsychje, but I've been using it as an HTPC
[11:55] <lotuspsychje> Guest88: yeah but its an ubuntu desktop or server base?
[11:56] <Guest88> lotuspsychje, I honestly don't remember, is there a command that will tell me?
[11:57] <Guest88> lsb_release -a just says 22.04 jammy
[11:58] <lotuspsychje> Guest88: try apt policy ubuntu-desktop
[11:59] <Guest88> ubuntu-desktop:
[11:59] <Guest88>   Installed: (none)
[11:59] <Guest88>   Candidate: 1.481
[11:59] <Guest88>   Version table:
[11:59] <Guest88>      1.481 500
[11:59] <Guest88>         500 mirror://mirrors.ubuntu.com/mirrors.txt jammy/main amd64 Packages
[12:00] <Guest88> it says installed: (none) candidated: 1.481
[12:01] <lotuspsychje> so thats not installed
[12:01] <Guest88> the display mangler is lightdm and window manager cinnamon
[12:05] <Guest88> lotuspsychje, could you enlighten me? what does that tell us?
[12:07] <lotuspsychje> Guest88: try apt policy netplan
[12:09] <Guest88> lotuspsychje, https://termbin.com/i7v8
[12:10] <Guest88> lotuspsychje, netplan is definitely installed so I'm not sure what it thinks it is telling us
[12:13] <Guest88> lotuspsychje, is this helping us get closer to an answer?
[12:14] <lotuspsychje> lets try your dmesg in a paste Guest88
[12:23] <Guest88> lotuspsychje, sorry for the delay https://snippet.host/bxgt
[12:23] <Guest88> running into all sorts of issues over here
[12:24] <lotuspsychje> Guest88: seems like you're on debian and not ubuntu
[12:25] <lotuspsychje> Guest88: that would be #debian for support
[12:26] <Guest88> lotuspsychje, how is that possible? this has always been ubuntu... lsb_release confirms it
[12:27] <Guest88> https://snippet.host/ruah
[12:27] <Maik> probably because you installed a kernel which isn't from the ubunut repo's
[12:28] <Guest88> Maik, xanmod yes
[12:28] <Maik> Guest88: yep and that's not support here
[12:29] <Guest88> Maik, OK, what does that have to do with the ubuntu upgrade breaking networking?
[12:30] <Maik> if you install stuff from outside the official ubuntu repo's it's at your own risk and you're on your own.
[12:30] <Guest88> Maik, I've been running those kernels for years because the official kernels kept causing that laptop to hang/crash
[12:31] <Maik> i'm not network expert at all so i can't help you
[12:31] <Maik> but still, installing custom kernels is at your own risk
[12:32] <Maik> at some point it can lead to breakage and other issues
[12:41] <unimatrix9> hello all
[12:42] <unimatrix9> when connection to a public wifi spot ( ubuntu 20.04 and up ) , you  get this connection popup, that should show you the login page -- i get the to many redirects error, where is this configured , what processes are involved ? any tips are welcome ( or experiences )
[12:45] <unimatrix9> i think its called captive portal
[12:45] <unimatrix9> where are the config files for this behavior ? any one ?
[12:53] <ogra> unimatrix9, not sure where the config files are but you can influence the behavior in the settings app under "privacy" settings somewhere .... "connecivity checking" or some such ... try toggling it and see if the captive portal page shows up then ...
[12:55] <unimatrix9> thanks for your reaction, did try that one , no succes ( yet )
[13:02] <sem> I have a problem in Ubuntu - when I am using gedit, I cannot read whatever line the cursor is on, because the text is white, but gedit also highlights the current line in white as well
[13:03] <sem> as a workaround I turned off "highlight current line"
[13:04] <unimatrix9> sem , and in preferences , you can choose the colors , would that help ?
[13:05] <sem> It would help; although I couldn't tell from a glance which option would work. I am just surprised that this is the default.
[13:06] <sem> "Tango" is the one that is hard to read
[13:06] <sem> as is "Classic"
[13:17] <sem> If I wanted to check an SD card for errors, would I use fsck or something beyond fsck
[13:18] <lotuspsychje> sem: usualy when you journalctl -f and plug in your card it will give you information
[13:18] <sem> thanks, i'll try that
[13:19] <sem> it tells me to please run fsck
[13:20] <sem> but also, there are two partitions on that sd card, and it only tells me to run fsck on one of them, so that was good info
[13:25] <sem> Oh i just realized something...
[13:25] <sem> in ubuntu, the disk is mounted if it's in the dock... even if it doesn't have a dot next to it.
[13:25] <sem> I thought it was safe to eject if it didn't have the dot
[13:32] <unimatrix9> does echo 0 > /proc/sys/net/ipv4/conf/all/accept_redirects , configure it to accept redirects , or is it disabled with 0 ? to reject redirects ?
[14:22] <sepi> I'm having trouble booting jammy after having fixed a broken windows dual boot. How do I get grub working again. My setup is slightly weird maybe. I have a luks volume on my /dev/nvme0n1p6 which contains a btrfs fs with a subvolume for root.
[14:22] <sepi> I tried following the ubuntu grub2 installation guide from the wiki but I end up with the default grub2 command like when booting.
[14:23] <sepi> Oh, the system is GPT and UEFI btw
[14:29] <EriC^^> sepi: you get grub> ? or grub rescue> ?
[14:30] <sepi> the first one
[14:30] <sepi> afaik
[14:30] <EriC^^> hmm, try 'cat /boot/grub/grub.cfg'
[14:30] <EriC^^> can you boot the thing while being here?
[14:32] <sepi> yup, I'm on a different device
[14:32] <sepi> there are all the boot entries I would expect in the grub.cfg file. Shall I post it?
[14:33] <EriC^^> no
[14:33] <EriC^^> type 'configfile /boot/grub/grub.cfg'
[14:33] <sepi> in the grub promt?
[14:33] <EriC^^> yeah
[14:33] <sepi> one sec
[14:34] <sepi> the screen clears and show an empty prompt
[14:37] <sepi> I just managed to run 'configfile (hd0,XX5)/grub/grub.cfg' this gives me the usual screen
[14:38] <sepi> and it allows me to actually boot my system
[14:39] <EriC^^> ah great
[14:39] <EriC^^> let me know once it's booted
[14:40] <sepi> it is :)
[14:40] <EriC^^> ok, type "(sudo parted -ls; sudo efibootmgr -v) | nc termbin.com 9999"
[14:41] <EriC^^> paste the link it gives you here
[14:44] <sepi> EriC^^: https://termbin.com/aqk7
[14:46] <EriC^^> sepi: "cat /boot/efi/efi/ubuntu/grub.cfg | nc termbin.com 9999"
[14:47] <sepi> EriC^^: https://termbin.com/r5do
[14:48] <EriC^^> i think it's confused trying to use btrfs root/boot/grub but the file is in the 5th /boot partition
[14:49] <EriC^^> is /boot mounted right now? try 'df /boot'
[14:50] <sepi> yeah, it's mounte from /dev/nvme0n1p5
[14:50] <EriC^^> no idea about btrfs to be honest, but try 'sudo grub-install && sudo update-grub'
[14:51] <EriC^^> see if anything changes, really you want efi/ubuntu/grub.cfg to properly pointing it to the grub config file
[14:52] <EriC^^> maybe not use a /boot partition and copy it over to @/boot/ ?
[14:52] <sepi> It put a different uuid in fs_uuid now. I'll have to rebott later
[14:52] <EriC^^> aha
[14:52] <sepi> I guess it's fixed now. I'll see in an hour. Thanks a looot for the help already!
[14:52] <EriC^^> no problem
[15:07] <daulphin[m]> daulphin
[15:07] <lotuspsychje> we see you daulphin[m]
[15:08] <daulphin[m]> do you mean my camera
[15:09] <daulphin[m]> can anyone advise a great web translation extention for brave/firefox/chromium for linux ?
[15:10] <daulphin[m]> I don´t want to have google on my sytem
[17:14] <barg> I have a set of files, about 30 files, videolist1.txt videolist2.txt e.t.c. and each file has bunch of youtube video URLs.  I want to download all of videolist1.txt to a directory videolist1dir,  all of videolist2.txt videos to videolist2 dir. For each of 30 files.. how should I go about that?
[17:17] <barg> i'm using yt-dlp [url] to download a url. But, yt-dlp doesn't seem to have an option to pass an argument for the target directory to download them to
[17:18] <Saviq> barg it has `-o`: https://github.com/yt-dlp/yt-dlp#output-template
[17:22] <barg> Saviq: ah, thanks
[17:23] <tomreyn> barg: for myfile in videolist*.txt; do mydir=$(echo $myfile | cut -d. -f1); mkdir $mydir; cd $mydir; while IFS= read -r myvideourl; do yt-dlp $myvideourl; done < $myfile; cd ..; done
[17:23] <tomreyn> the better place for learning shell scripting is #bash
[17:23] <tomreyn> and the above is untested
[17:27] <barg> thanks
[17:31] <tsurugi> hi
[17:55] <phox_> Hi! Currently shift+home hightlights the entire page I'm viewing, I just want it to highlight the current row. This is done by fn+shift+home. Can I rebind this somehow to just shift+home? Thanks :)
[18:23] <B0g4r7> I've got a bug to report.
[18:23] <lotuspsychje> B0g4r7: can you describe whats it about?
[18:24] <B0g4r7> I'm running Ubuntu Desktop 20.04, and when the lockscreen is up and my cat goes to sleep on the keyboard and fills the password field up with thousands of characters, the UI crashes and I can't login or do anything else until I reboot.
[18:47] <genii> Probably the ugliest hack for the cat keyboard is enable onscreen keyboard for gnome desktop screensaver, then use xinput to find your AT Keyboard identifier, then have gnome -screensaver called with xinput float <keyboard identifier> && gnome-screensaver && xinput reattach <keyboard identifier>
[18:48] <genii> So that the user/pass has to be entered now by specific manipulation of the pointing device to select it from the onscreen keyboard
[18:49] <genii> ..or, just unplug your keyboard before going to bed
[19:08] <tomreyn> not have the 'UI crash' would possibly be enough of a fix, too.
[19:10] <tomreyn> B0g4r7: i'd say just go ahead and file that bug, since 'UI crash' should not be happening in the first place.
[19:10] <tomreyn> !bug | B0g4r7
[19:10] <arraybolt3> And I can already think of a solution to this problem - simply wipe the password field any time it hits an unreasonable number of characters (no one actually has a multi-hundred character password, right?)
[19:51] <Guest19> Hello...
[19:52] <oehman> hello how are you
[19:53] <oehman> me been up for a cupple of hours and drinking beer
[19:53] <oehman> +beer
[20:02] <eelstrebor> anyone know of an app that can read forscan files (.fsl extension) in linux?
[20:07] <SteelRose> hi all! I'm looking for an email solution for a self-hosted service with a backend control panel, etc... So far, I've seen Mail-In-a-Box, iRedMail and Modoboa... any other suggestions in that aera? Thanks!
[20:10] <rob0> SteelRose, ##email is more appropriate.
[20:11] <SteelRose> rob0: thanks
[20:19] <rob0> ^^ and s/he /quit while I was typing an important reply in ##email :(
[20:20] <rob0> (namely, that the biggest problem with any self-hosted mail is getting big players to accept your mail!)
[20:28] <raub> Does anyone have the disk layout of a ubuntu desktop install with encryption? I know th eefi partition is out, but it seems /boot is in the encrypted drive. How does it boot and unencrypt the luks partition?
[20:39] <arkanoid> hello! I am trying to use an usb sound card. cat /proc/asound/cards returns https://termbin.com/6lo5, but "aplay -l" returns aplay: device_list:276: no soundcards found...
[20:56] <SpaceTraveller> \quit
[21:57] <bsmith0931> did something change in openssh recently? suddenly no android file managers can connect to my servers, using a perfectly good ssh key that was working fine a week ago.
[21:58] <bsmith0931> i get either "network error" or rarely "unable to reach a settlement"
[22:02] <leftyfb> bsmith0931: yes
[22:02] <sophie> keys made with sha-1 will no longer work i think
[22:03] <leftyfb> bsmith0931: https://www.reddit.com/r/Ubuntu/comments/ubatdw/cannot_ssh_to_aws_server_when_upgrade_to_ubuntu/
[22:04] <bsmith0931> ...wow. ok after beating my head against a wall, i found a thing in the host logs. "Deprecated option RSAAuthentication"
[22:04] <bsmith0931> so what do i use now?
[22:04] <cbreak> hmm... it seems the snap firefox can no longer connect to 1password
[22:04] <cbreak> probably some misconfiguration on mozilla's part
[22:04] <leftyfb> bsmith0931: see the post I posted anove
[22:04] <leftyfb> above*
[22:07] <bsmith0931> ssh/config is for the host to connect to. i need something for my phone.
[22:11] <leftyfb> bsmith0931: the Ubuntu 22.04 server isn't denying ssh-rsa keys as far as I know. The options I gave are for the openssh client refusing to use the ssh-rsa private keys
[22:12] <leftyfb> bsmith0931: it sounds like the issue in your case is with your ssh client on your phone and nothing to do with ubuntu
[22:50] <arraybolt3> Hey, I remember there's some file that, if its present on the system, it means you need to reboot. What's it called, and where's it at?
[22:52] <oerheks> var/run/reboot-required
[22:52] <oerheks> but bing would have told you so too :-D
[23:01] <arraybolt3> oerheks: I looked, wasn't sure if I had found it or not, and it wasn't present on my system (guess I don't need to reboot LOL), so I couldn't verify. Thank you!
[23:01] <oerheks> have fun!
[23:03] <Guest8568> Hello - i have "full" disk encryption set up per https://help.ubuntu.com/community/Full_Disk_Encryption_Howto_2019 and want to allocate some unused space to the root partition.  How can i go about that?  Instructions i've found so far do not mention encryption. In my "ubuntu-vg" virtual group is 16G swap, 32G root, something like 80-90G
[23:03] <Guest8568> unallocated, and then 369 for home.
[23:04] <XATRIX> Hi, can you advice, i have purged smartmontools from my system, and now , my systemd says i have a failed service. How can i tell systemd to rescan all services, without reboot. My prometheus monitoring system alerts me about it every hour
[23:05] <XATRIX> Can you please, check the screenshot ?
[23:05] <XATRIX> https://imgur.com/ujO3U8j.png
[23:06] <XATRIX> As i said, i removed smartmontools, but service is still persist on my system
[23:06] <oerheks> that would be normal.
[23:07] <oerheks> if you did not stop and disable and mask it, it will stay?"
[23:07] <oerheks> so, reboot to get a proper system?
[23:08] <XATRIX> is there any way to make it get away from my systemd without reboot ?
[23:08] <oerheks> systemctl stop smartd.service?
[23:09] <XATRIX> it's already stopped.
[23:09] <XATRIX> ● smartd.service
[23:09] <XATRIX>    Loaded: not-found (Reason: No such file or directory)
[23:10] <XATRIX>    Active: failed (Result: exit-code) since Mon 2022-05-30 19:00:36 EDT; 8min ago
[23:10] <XATRIX> maybe there's something like "systemctl --reread-all-services" ?
[23:11] <EdFletcher> systemctl daemon-reload
[23:12] <oerheks> no, you need to get rid of that mount unit file, see unit management https://www.digitalocean.com/community/tutorials/how-to-use-systemctl-to-manage-systemd-services-and-units
[23:12] <oerheks> and use disable for that smartd ?
[23:13] <oerheks> reboot would avoid all these steps
[23:15] <XATRIX> Go it. ok.thanks
[23:20] <arraybolt3> Quick question for y'all - does anyone here have problems trying to reformat a USB drive that had been turned into a live USB at one point? I remember having these problems on Kubuntu 14.04, and I found a solution. I'm wondering if it's worth turning into a guide.
[23:27] <oerheks> arraybolt3, basicly; no
[23:27] <oerheks> using the usb creator tool, nor commandline
[23:29] <oerheks> !usb
[23:51] <pi0> i have a fresh install of ubuntu 22.04 but some how my audio settings looks like this https://i.imgur.com/MCjzNMd.png
[23:51] <pi0> "dummy output"
[23:55] <arraybolt3> oerheks: Guess it must've just been a bug of Gparted then. Any time I would dd an ISO to a flash drive, GParted would throw a fit if I tried to reformat that drive, unless I dd'ed zeroes over the top of the start of the drive. OK, thank you!