| tomreyn | a fresh install is often a good approach when you have unexplicable behavior such as those questions marks on a tmpfs on https://www.toptal.com/developers/hastebin/saceruwozo.yaml | 00:01 |
|---|---|---|
| arraybolt3[m] | mantis': Sadly, installing two desktop environments side by side can have serious problems, and while part of me is surprised to hear that it's GNOME and KDE that caused the mess, it's still not recommended. Once you get this sorted out, you can use a virtual machine to try out other distros with the desktop environment you want to experiment with. | 00:02 |
| arraybolt3[m] | Bashing-om: And even without backups, if the user data is still accessible, the thing can be recovered without too much fuss. | 00:02 |
| arraybolt3[m] | mantis': This might be a silly suggestion, but can you make a new user account and see what happens if you log in there? | 00:03 |
| tomreyn | i would think there must be system level issues affecting this installation. those question marks on tmpfs directory listing make me think an essential lib is broken, or worse, ram. time of day is apparently off, journalctl is probably full of errors. | 00:06 |
| tomreyn | (or dmesg even) | 00:06 |
| === synapt is now known as nate | ||
| === nate is now known as Guest4657 | ||
| === useful_idiot16 is now known as useful_idiot1 | ||
| === waxfire4 is now known as waxfire | ||
| === RaGE_Syria2 is now known as RaGE_Syria | ||
| === polymorp- is now known as polymorphic | ||
| === toozej8517 is now known as toozej851 | ||
| === djhankb2 is now known as djhankb | ||
| === pasiz8 is now known as pasiz | ||
| === JanC_ is now known as JanC | ||
| === Furor is now known as Colere | ||
| === Polo is now known as money | ||
| === diskin is now known as Guest477 | ||
| === diskin_ is now known as diskin | ||
| === RaGE_Syria9 is now known as RaGE_Syria | ||
| === waxfire1 is now known as waxfire | ||
| === polymorp- is now known as polymorphic | ||
| === mike is now known as Guest236 | ||
| === Guest236 is now known as m | ||
| === m is now known as m121 | ||
| alkisg | tomreyn: ls -l /run/user/* => it's normal to have question marks in doc and gvfs there, don't you? | 08:06 |
| underestimates9 | heya | 08:49 |
| luna__ | hi | 08:49 |
| WereCatf | How do I enable Ubuntu to turn the display off on Ubuntu Server? This is not a desktop-installation, there is no X installed. Also, no, adding consoleblank to kernel command-line doesn't turn the display off, it just blanks it. | 09:09 |
| ikonia | WereCatf: power management | 09:13 |
| WereCatf | That's not a very useful answer, mate. | 09:14 |
| KBar | WereCatf: define "turn off". you want something to act like a hard kill switch? | 09:17 |
| KBar | ie press the power button for ya? | 09:18 |
| WereCatf | KBar: No, I specifically am talking about the display, not the entire device. | 09:21 |
| WereCatf | Turning off a connected display has been a feature supported by PCs for over 20 years now. | 09:21 |
| alkisg | WereCatf: something like this? https://askubuntu.com/questions/62858/turn-off-monitor-using-command-line | 09:24 |
| WereCatf | alkisg: except that's a manual process. I just wanna know why Ubuntu Server refuses to turn the display off when using consoleblank on the kernel command-line and how to make it work, when it works fine on other distros. | 09:25 |
| alkisg | WereCatf: https://www.kernel.org/doc/html/latest/admin-guide/kernel-parameters.html says that consoleblank is supposed to blank the screen, not power it off | 09:27 |
| alkisg | What does it do in Ubuntu, blank it or nothing? | 09:27 |
| WereCatf | alkisg: it blanks the screen, it doesn't turn the backlight off. Also, yes, consoleblank *can* actually turn the backlight off. | 09:29 |
| ogra | WereCatf, consoleblank has never managed DPMS ... | 09:29 |
| ogra | perhaps other distros ship vbetool by default and have it react to the blanking or some such | 09:30 |
| === dibqip is now known as dbqp | ||
| Helmholtz1 | How can I install flatpak in a minimal way so I can completely remove it after I check somethig? | 09:39 |
| === MrA is now known as Ders | ||
| === kaiseisei1 is now known as kaiseisei | ||
| === polo is now known as money | ||
| murmel | When I have a question about a backport, where should I go to, as there is no backports channel :/ | 10:41 |
| murmel | Helmholtz1: there is really no minimal flatpak install as all recommends are quite useful | 10:41 |
| murmel | Helmholtz1: but what do you want to check out? | 10:41 |
| ogra | murmel, https://lists.ubuntu.com/mailman/listinfo/ubuntu-backports | 10:46 |
| murmel | ogra: eh, just for a general question, not a bugreport | 10:47 |
| ogra | yes ... this is where they discuss stuff | 10:47 |
| murmel | ogra: thanks :) just wanted to make sure | 10:48 |
| ogra | i think the throughput is too low to actually keep an IRC channel alive ... | 10:48 |
| ogra | (they seem to have regular IR meetings though) | 10:48 |
| ogra | *IRC | 10:48 |
| murmel | ahh nice, I guess it's better to ask there | 10:49 |
| ogra | last meeting seems to have been on june 15th though ... might take a while til the next one | 10:51 |
| murmel | eh, no problem, there is no rush. as I am trying to get myself into packaging and trying to selfbackport some stuff, but a package in bpo (trying to compile myself) I can't get it quite to work. whatever I try to do :/ | 10:52 |
| tanul1989 | Hello | 11:09 |
| luna__ | hi | 11:09 |
| tanul1989 | We have reboot-required file in /var/run | 11:09 |
| tanul1989 | After reboot.. Does this file remains there or it will delete automatically | 11:10 |
| murmel | tanul1989: it will be deleted | 11:15 |
| tanul1989 | oh ok.. Thanks | 11:17 |
| === realivanjx3 is now known as realivanjx | ||
| BluesKaj | Hi all | 11:48 |
| luna__ | hey | 11:55 |
| === Polo is now known as money | ||
| === mitch is now known as MitchGaines | ||
| === useful_idiot11 is now known as useful_idiot1 | ||
| === manfromafar7 is now known as manfromafar | ||
| deadrom | hi all | 13:33 |
| deadrom | are there any fixed IP mirrors? | 13:33 |
| === leftyfb_ is now known as leftyfb | ||
| oerheks | what are fixed IP mirrors? | 13:38 |
| deadrom | canonical mirrors at fixed IPs I can put in sources instead of dns names | 13:39 |
| === jess is now known as JESS | ||
| leftyfb | deadrom: why would you do such a thing? | 13:40 |
| deadrom | leftyfb, eliminate DNS issues | 13:40 |
| deadrom | for security | 13:40 |
| leftyfb | fix the DNS issues | 13:40 |
| deadrom | I don't run the internet's DNS | 13:41 |
| leftyfb | using ip's over DNS does not improve security | 13:41 |
| leftyfb | deadrom: then you don't use the internet | 13:41 |
| deadrom | There are DNS attacks that's been done in the past. No DNS resolving, talk to static IP, no risk of going to fake hosts | 13:42 |
| leftyfb | deadrom: good luck with that | 13:42 |
| leftyfb | deadrom: the internet without DNS is called a broken internet | 13:42 |
| oerheks | i see no list of available mirrors and their IP, dig the one you are currently using? | 13:43 |
| oerheks | i see a whole range.. dig +short $(grep -Pho '^\s*[^#].*?https?://\K[^/]+' /etc/apt/sources.list /etc/apt/sources.list.d/*.list | sort -u) | sort -u | 13:43 |
| KBar | deadrom: try 91.189.91.39 & 185.125.190.36 | 13:43 |
| oerheks | so no, just one hard ip will not work | 13:43 |
| leftyfb | deadrom: there have been attacks on IRC, web browsers and operating systems. You should just use the internet without those as well | 13:44 |
| deadrom | leftyfb, that discussion leads nowhere. a certain other OS manufacturer has IP ranges reserved for update servers and they will give in writing that when I takl to these IPs I will be talking to their servers. | 13:45 |
| deadrom | Now I want to know is there such athing for canonical, too, or not | 13:45 |
| KBar | there probably is | 13:46 |
| KBar | for enterprise customers | 13:46 |
| oerheks | only if you run yoru own mirror, still snaps are on a different IP | 13:46 |
| deadrom | KBar, good point. I shall talk to Canonical. | 13:46 |
| KBar | try to contact https://ubuntu.com/support | 13:47 |
| dsc_ | deadrom: mirrors are often over HTTP, so even if you were to get those fixed IPs, you'd still have unencrypted traffic that is easy to modify (from the perspective of an ISP or goverment) | 13:48 |
| dsc_ | deadrom: however that wont work, because ubuntu has some client-side checks to protect against that | 13:48 |
| dsc_ | so your quest to find fixed IPs makes no sense at all. | 13:48 |
| oerheks | one can test this with that one-liner | 13:49 |
| deadrom | dsc_, have you heard of https? | 13:50 |
| dsc_ | deadrom: i dont think you understand what I just said | 13:50 |
| deadrom | dsc_, you said yOuR TrAfFiC WiLl bE uNeNcrYptEd CuZ HtTP | 13:51 |
| dsc_ | yes, canonical ships ubuntu with http mirrors, see also your /etc/apt/sources.list | 13:52 |
| xheimlich | a while back I was in a google meet and tried to open audacity to record it. | 13:52 |
| xheimlich | ever since, I can't use a microphone with my laptop. | 13:52 |
| xheimlich | alsamixer shows the mic input as disabled. --- | 13:53 |
| dsc_ | deadrom: they are cryptographically signed | 13:53 |
| deadrom | dsc_, I know. | 13:53 |
| xheimlich | I was thinking of turning it off and on again, but maybe there's an incantation? | 13:53 |
| dsc_ | deadrom: so you want fixed IPs "for security" but it helps nothing. | 13:54 |
| KBar | xheimlich: what version of ubuntu? what kind of a mic? internal/external? did you upgrade Ubuntu to 22.04 recently? | 13:54 |
| rob0 | xheimlich: say it in an Irish accent? | 13:54 |
| xheimlich | I updated to 20.04 recently. My keyboard is also messed up. | 13:54 |
| xheimlich | external, the internal mic still works. | 13:54 |
| oerheks | install apt-transport-https and grab one supporting https https://launchpad.net/ubuntu/+archivemirrors | 13:54 |
| xheimlich | headphone with mic. | 13:55 |
| KBar | now lets tackle one problem at a time | 13:55 |
| xheimlich | yes. I tried to get help here about my keyboard once and gave up. anyway, about the sound. | 13:55 |
| KBar | xheimlich: first, make sure it works at all. got a spare computer/device? | 13:55 |
| xheimlich | uname says (Linux xheimlich 5.4.0.120-generic #136-Ubuntu SMP x86_64 GNU/Linux | 13:56 |
| xheimlich | the headphones? I've been using them on my phone since I can't attend meetings on my computer. | 13:56 |
| KBar | xheimlich: the mic on the headphones | 13:56 |
| xheimlich | yes. | 13:57 |
| xheimlich | the internal mic also works. It's not a good solution because I live at a noisy home. | 13:57 |
| oerheks | remove .config/pulse and restart pulseaudio? | 13:58 |
| dsc_ | deadrom: consider if you perhaps fell for the marketing gimmicks of a certain OS manufacturer | 13:58 |
| deadrom | xheimlich, pulse or plain alsa? | 13:58 |
| xheimlich | deadrom: I don't know. | 13:58 |
| deadrom | xheimlich, ps ax | grep pulse | 13:58 |
| xheimlich | I installed 18.04 about three years ago and updated to 20.04 just two weeks ago. But that didn't produce sound problems imediately. | 13:58 |
| xheimlich | ah, it's there. /usr/bin/pulseaudio | 13:59 |
| deadrom | xheimlich, check your pulseaudio mixer what it thinks of your mic | 13:59 |
| xheimlich | I use alsamixer to adjust volumes. (I use a tiling wm instead of gnome and tend to use TUI tools like nmtui, etc_ | 14:00 |
| xheimlich | anyway, instead of a volume bar, it literally says "-------". Is there an image pastebin to post a screenshot? | 14:01 |
| deadrom | xheimlich, pamix or pulsemixer | 14:01 |
| deadrom | xheimlich, pasteboard.co | 14:01 |
| xheimlich | I have neither pamix or pulsemixer installed. | 14:02 |
| deadrom | apt install? :) | 14:02 |
| oerheks | and maybe kill your Zoom client.. it starts up automatic, IIRC | 14:03 |
| xheimlich | https://pasteboard.co/deHjDbeLsu55.png | 14:03 |
| xheimlich | yeah, I uninstalled zoom and teams. | 14:03 |
| xheimlich | also the slack linux channel is horrible. I have brave set up so it doesn't do tabs and instead all browser windows show up on alt-tab. | 14:04 |
| xheimlich | (meaning rofi) | 14:04 |
| xheimlich | s/linux channel/linux port/ | 14:04 |
| xheimlich | meanwhile I'm installing pulsemixer. | 14:05 |
| deadrom | xheimlich, in alsamixer, can you umute the mic pressing M? | 14:05 |
| xheimlich | Can't. Usually I have internal mic and speaker perma muted because the baby sleeps in my office in the mornings and afternoons. | 14:06 |
| xheimlich | it's not a case of that. | 14:06 |
| xheimlich | (getting pulsemixer.......) | 14:06 |
| BluesKaj | check alsamixer to enable said mic | 14:07 |
| xheimlich | (We were discussing the headphone. It works with an external USB sound card too. Just not when plugged in straight into the laptop.) | 14:09 |
| xheimlich | somehow apt is stuck at Progress: [ 80%]. I'll report back. | 14:09 |
| BluesKaj | sry, my mistake | 14:10 |
| xheimlich | what the hell, kitty didn't repaint the bottom of the window. it's been done for a while. | 14:10 |
| xheimlich | yeah. without a headphone plugged in, pulsemixer shows the built-in audio analog stereo fine. | 14:12 |
| xheimlich | plugging in a headphone makes it gray out. | 14:12 |
| xheimlich | https://pasteboard.co/1jSli6Z0502N.png | 14:13 |
| xheimlich | anyway, I think tonight I'll just power cycle the thing. | 14:17 |
| xheimlich | I need to get back to work. | 14:17 |
| transhumanist | HI! Whats wrong with this deboostrap line that it actually creates a file called --include=net-tools ? https://bpa.st/WENQ | 14:32 |
| transhumanist | for some reason its not interpeting it as a valid command? | 14:32 |
| dsc_ | transhumanist: try net-tools,iputils-ping,... (without spaces) | 14:33 |
| jorge | hola? | 14:34 |
| jorge | hi? | 14:34 |
| transhumanist | ah ok I also notice its out of order with the options as listed in the man pages does that matter | 14:34 |
| dsc_ | transhumanist: no | 14:35 |
| transhumanist | ok thanks a lot we will see that's great! | 14:35 |
| jorge | hola}?? | 14:36 |
| oerheks | !es | 14:37 |
| ubottu | En la mayoría de los canales de Ubuntu, se habla sólo en inglés. Si busca ayuda en español entre al canal #ubuntu-es; escriba " /join #ubuntu-es " (sin comillas) y presione intro. | 14:37 |
| === Polo is now known as money | ||
| === JESS is now known as jess | ||
| Barnerd | Having intermittent SSL issues with 22.04 Postfix 3.6.4/OpenSSL 3.0 | 15:15 |
| Barnerd | 2 clients (both Java/JavaMail) get intermittent issues when connecting: | 15:16 |
| Barnerd | warning: TLS library problem: error:0A0003F2:SSL routines::sslv3 alert unexpected message:../ssl/record/rec_layer_s3.c:1584:SSL alert number 10: | 15:17 |
| Barnerd | How do I best report this? Expecting an incompatibility issue between OpenSSL 3.0 and JavaMail mostly | 15:17 |
| ravage | you should report that those clients should not be allowed to connect to the internet anymore | 15:18 |
| Barnerd | Or: fixing it would be a shame as it may fix an issue that skiddies will have | 15:19 |
| Barnerd | Don't even get me started on the version of the JavaMail package that at least one of them runs... | 15:20 |
| Barnerd | But still: best way to report issues? | 15:21 |
| Mentos | hi all | 15:32 |
| Mentos | I am having network (wifi) issues on my fresh ubuntu 22.04 install via live usb | 15:32 |
| Mentos | it's a rtl 8822 BE | 15:33 |
| Mentos | Nothing too crazy | 15:33 |
| Mentos | I had a look but couldn't find any DMKS or whatever it is driver for that specific chipset | 15:34 |
| Mentos | I also then found a few github projects saying their thing could basically make it run with <some random> dkms driver | 15:35 |
| Mentos | because it's foundationally identical I think maybe it just doesn't identify under the ubuntu device lists or something | 15:35 |
| Mentos | the closest match I found on apt was I think the 8811 | 15:35 |
| Mentos | which I'm pretty sure would probably work just fine but <isn't> | 15:36 |
| Mentos | any advice appreciated -- I can provide some more info as well but don't want to flood the channel | 15:36 |
| rob0 | (Good thing Diet Coke is not here! Talk about flooding the channel!) | 15:39 |
| rob0 | !paste | 15:39 |
| ubottu | For posting multi-line texts into the channel, please use https://paste.ubuntu.com | To post !screenshots use https://imgur.com/ !pastebinit to paste directly from command line | Make sure you give us the URL for your paste - see also the channel topic. | 15:39 |
| enigma9o7[m] | Mentos, odds are if you didn't find it with apt, its not in ubuntu repo. Some of those realtek drivers have to be installed manually cuz some weird license issues makes them non distritutable. | 15:40 |
| === Polo is now known as money | ||
| KBar | a bit strange that an increasingly number of users report problems with their rtl network adapters | 15:49 |
| KBar | on 22.04 | 15:49 |
| KBar | Mentos: did you try rtl8821ce-dkms ? | 15:52 |
| KBar | Mentos: `apt install rtl8821ce-dkms` | 15:54 |
| transhumanist | gconftool-2 -t bool --set /apps/gnome-terminal/profiles/Default/scrollback_unlimited 1 <<< this appears to do nothing anyone know why? is a log out and log back in required or something | 15:59 |
| transhumanist | I am on Ubuntu 22.04 | 16:01 |
| Mentos | KBar: but it's the 8822 though | 16:01 |
| transhumanist | produces no errors though | 16:01 |
| Mentos | I will try | 16:01 |
| Mentos | it looked like the tools I saw were basically to fool the identifier to use the ""wrong"" driver | 16:01 |
| Mentos | which is ofc like 100% compatible | 16:01 |
| Mentos | I will try though | 16:02 |
| Mentos | it makes it hard because I have to use my phone as a hotspot because it has no wifi lol | 16:03 |
| KBar | Mentos: ?? it has modules for 8822 the name is confusing | 16:03 |
| Mentos | er ethernet | 16:03 |
| KBar | check the package content | 16:03 |
| Mentos | KBar: the package for 8821 has 8822 ? | 16:03 |
| Mentos | can you link me | 16:03 |
| Mentos | <3 | 16:03 |
| KBar | Mentos: https://packages.ubuntu.com/search?searchon=contents&keywords=rtl8822&mode=filename&suite=jammy&arch=any | 16:04 |
| Mentos | I feel frustrated by the whole thing tbh because I know the <other> driver WILL work | 16:04 |
| KBar | you could do with apt-file, but its not installed by default | 16:04 |
| KBar | `apt-file list pck-name` | 16:04 |
| Mentos | so why isn't the device ident more like, either signed like windows for a whole host of devices | 16:04 |
| Mentos | or soft/fuzzy logic | 16:04 |
| Mentos | It's going to be a problem for people in the future because they make such arbitrary chips for random items let alone whole models | 16:05 |
| Mentos | and Ethernet is oft expected to be added via usb-c | 16:05 |
| Mentos | as with my device | 16:05 |
| Mentos | anyway I will network it up using my phone and give it a go | 16:05 |
| Mentos | thanks! | 16:05 |
| KBar | did you install the package? | 16:05 |
| Mentos | one moment i'm setting up a bluetooth PAN to my desktop -- easier than phone hostpot | 16:11 |
| Mentos | hotspot* | 16:11 |
| enigma9o7[m] | ya cuz plugging a cable between phone and pc is difficult | 16:21 |
| Mentos | it is when all it's non-usb-c ports are "dodgy" | 16:29 |
| Mentos | aka propping the cable/device up to work reliably | 16:29 |
| Mentos | xD | 16:29 |
| Mentos | though windows 10 has confused me | 16:29 |
| Mentos | it used to be a trivial thing | 16:30 |
| Mentos | meh sidebarring that cause legit windows 10 has tried to transition it to the new UI but missed it or something | 16:32 |
| Mentos | to wifi we go | 16:32 |
| Mentos | Urgh ok usb was totally unworkable without a usb-c to usb-c cable | 16:47 |
| Mentos | it was dropping every few seconds even | 16:48 |
| Mentos | but managed to get bt PAN working from my phone | 16:48 |
| Mentos | (again they really messed up the UI for where/how lol) | 16:48 |
| Mentos | ok trying now -- sorry for delays, it's frustrating to NEED networking but not have networking despite having a pretty dang generic realtek lol | 16:48 |
| lotuspsychje | Mentos: wich kernel are you on currently? | 16:50 |
| Mentos | am currently doing a (second since install) 500mb upgrade | 16:52 |
| Mentos | so will let you know once that completes/reboots | 16:52 |
| Mentos | I am not entirely sure if it's relevant though -- afaik I just need a compatible dkms driver (third party to some degree possibly) and have the system go "yep, use this" | 16:53 |
| Mentos | from what I was finding, that's basically what the tools on github did in a more robust way than ubuntu and then forced/faked it to load properly or something | 16:54 |
| Mentos | it's not going very fast unfortunately because <bluetooth> | 16:54 |
| lotuspsychje | Mentos: most cases realtek chipsets are kernel itchy, works on one and not on another | 16:54 |
| Mentos | well if it's dkms as I have seen then it's at a minimum outside the kernel afaik | 16:54 |
| Mentos | could be wrong | 16:54 |
| Mentos | it should show up as a "third party" driver | 16:54 |
| Mentos | and again if I had like a 8811 from what I understand it'd work perfectly | 16:55 |
| Mentos | and I think the 8822 just added newer wifi specs lol | 16:55 |
| lotuspsychje | Mentos: you might wanna checkup some recent bugs like; bug #1972091 | 16:55 |
| Mentos | ie "n" onwards | 16:55 |
| ubottu | Bug 1972091 in rtl8821ce (Ubuntu) "rtl8821ce wifi not working ubuntu 22.04" [Undecided, Confirmed] https://launchpad.net/bugs/1972091 | 16:55 |
| === PsiloCybin is now known as Psilo-mobile | ||
| andro | what is the difference between Ubuntu Server regular install and Ubuntu Server (minimized)? it says that the minimized version has a "small runtime footprint in environments where humans are not expected to log in". so if i plan to use this server via ssh, should i be using the regular install? | 16:56 |
| Mentos | ubottu: 8821ce is the driver I was just told to try | 16:56 |
| ubottu | Launchpad bug 8678 in control-center (Ubuntu) "Gnome session will not start when no audio device present" [Medium, Fix Released] [duplicate: 8821] https://launchpad.net/bugs/8678 | 16:56 |
| Mentos | er lotuspsychje * | 16:56 |
| Mentos | but I am unsure if, without said random tools, it will actually allow itself to use that | 16:56 |
| Mentos | given it's <not a 8821> | 16:56 |
| Mentos | the "more robust tool" I saw was basically using fuzzy logic for it I belief | 16:57 |
| Mentos | instead of direct identifiers | 16:57 |
| Mentos | also wonder if, just randomly, I might have better luck with say 20.04 | 16:58 |
| Mentos | or 18.04 | 16:58 |
| oerheks | andro, where did you read that? | 16:58 |
| Mentos | oerheks: both options are available | 16:58 |
| Mentos | I am unsure how you would exactly list all the packages of both | 16:59 |
| Mentos | in theory say, synaptic should be able to... ? | 16:59 |
| andro | oerheks: its on the ubuntu server install screen | 16:59 |
| andro | word for word | 16:59 |
| Mentos | andro: from my experience | 16:59 |
| oerheks | oh i see https://wiki.ubuntu.com/Minimal | 16:59 |
| Mentos | the server install wont even do xorg | 16:59 |
| Mentos | it's purely CLI | 17:00 |
| Mentos | so no libre-stuff etc | 17:00 |
| oerheks | well, on both you need to install the ssh service | 17:00 |
| Mentos | no you don't... ? | 17:00 |
| Mentos | on literally either of them ? | 17:00 |
| Mentos | lolz | 17:00 |
| oerheks | please easy on the enter mentos | 17:00 |
| andro | I don't need Xorg | 17:01 |
| andro | this will be a server machine | 17:01 |
| oerheks | andro, ignore those comment.. server does no xorg/wayland | 17:02 |
| Mentos | that's what I said | 17:03 |
| Mentos | and that is the core difference | 17:03 |
| andro | why does it say that the minimized environment is one where humans are not expected to log in? | 17:03 |
| Mentos | and also won't include anything <gui reliant> ie libre etc | 17:04 |
| Mentos | andro: where? | 17:04 |
| Mentos | sounds weird | 17:04 |
| andro | Mentos: in the server install screen, it says: Ubuntu Server\n The default install contains a curated set of packages that provide a comfortable experience for operating your server.\n Ubuntu Server (minimized)\n This version has been customized to have a small runtime footprint in environments where humans are not expected to log in. | 17:05 |
| oerheks | see those minimized images as host for docker or a service. | 17:08 |
| Mentos | andro: it's just minimized more aka no gui side at all which eliminates a lot of requirements | 17:09 |
| Mentos | as I say there SHOULD be a page where you can view each specific forks package requirements | 17:09 |
| Mentos | but not any easy tool to compare them directly | 17:09 |
| Mentos | but that's ESSENTIALLY the difference between the two, and nothing to do with "if humans log in" | 17:10 |
| Mentos | not sure where you read that thus why I asked for a link | 17:10 |
| Mentos | they both come stock with SSH part of the same kernel ready to go | 17:10 |
| Mentos | they will both have you make "a user" | 17:10 |
| andro | i think it means to say that nerds arent humans | 17:19 |
| andro | so logging in through ssh doesnt count | 17:19 |
| tanul1989 | Hello | 17:21 |
| tanul1989 | I need to know exactly which dates of patch is installed in my ubuntu.. If someone open this url | 17:22 |
| tanul1989 | https://ubuntu.com/security/CVE-2022-1664 | 17:22 |
| ubottu | Dpkg::Source::Archive in dpkg, the Debian package management system, before version 1.21.8, 1.20.10, 1.19.8, 1.18.26 is prone to a directory traversal vulnerability. When extracting untrusted source packages in v2 and v3 source package formats that include a debian.tar, the in-place extraction can lead to directory traversal situations on specially crafted orig.tar and debian.t... <https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2022-1664> | 17:22 |
| tanul1989 | you can see that for bionic one it is resolved in Released (1.19.0.5ubuntu2.4) | 17:23 |
| oerheks | look at the package for your version, then check out launchpad | 17:23 |
| Mentos | ... if you're not running atleast bionic... | 17:23 |
| Mentos | then yeah | 17:23 |
| Psilo-mobile | Hmm | 17:23 |
| oerheks | https://launchpad.net/ubuntu/bionic/+source/dpkg | 17:24 |
| tanul1989 | This is my OS details | 17:24 |
| tanul1989 | DISTRIB_ID=Ubuntu | 17:24 |
| tanul1989 | DISTRIB_RELEASE=18.04 | 17:24 |
| tanul1989 | DISTRIB_CODENAME=bionic | 17:24 |
| tanul1989 | DISTRIB_DESCRIPTION="Ubuntu 18.04.6 LTS" | 17:24 |
| tanul1989 | NAME="Ubuntu" | 17:24 |
| oerheks | Uploaded: 2022-05-25 | 17:24 |
| oerheks | !paste | tanul1989 | 17:24 |
| ubottu | tanul1989: For posting multi-line texts into the channel, please use https://paste.ubuntu.com | To post !screenshots use https://imgur.com/ !pastebinit to paste directly from command line | Make sure you give us the URL for your paste - see also the channel topic. | 17:24 |
| tanul1989 | This are my OS details: DISTRIB_ID=Ubuntu, DISTRIB_RELEASE=18.04, DISTRIB_CODENAME=bionic, DISTRIB_DESCRIPTION="Ubuntu 18.04.6 LTS", NAME="Ubuntu" , | 17:26 |
| tanul1989 | VERSION="18.04.6 LTS (Bionic Beaver)", ID=ubuntu, ID_LIKE=debian, PRETTY_NAME="Ubuntu 18.04.6 LTS", VERSION_ID="18.04" | 17:26 |
| oerheks | i already gave the answer, read back | 17:26 |
| tanul1989 | oerheks, Oh ok.. Microsoft told me to update the OS to at least 2022.05.31.. As per my understanding this update is already in my node.. I just wanted to check if its already there oo not | 17:28 |
| tanul1989 | How to check that | 17:28 |
| oerheks | apt list <package> or apt-cache policy <package> | 17:29 |
| tanul1989 | ok.. just checking.. the command will be apt list dpkg right?? | 17:30 |
| oerheks | try it? | 17:30 |
| tanul1989 | sure.. | 17:31 |
| tanul1989 | The output of apt list is dpkg/bionic-updates,bionic-security,now 1.19.0.5ubuntu2.4 amd64 [installed,automatic] | 17:33 |
| tanul1989 | N: There is 1 additional version. Please use the '-a' switch to see it | 17:33 |
| tanul1989 | I think it has the the correct version right oerheks | 17:34 |
| oerheks | yes you do. | 17:35 |
| tanul1989 | hmm.. I don't know why prisma cloud is giving this vulnerability CVE-2022-1664.. And, suggesting me to update the version to 1.20.10 | 17:41 |
| ubottu | Dpkg::Source::Archive in dpkg, the Debian package management system, before version 1.21.8, 1.20.10, 1.19.8, 1.18.26 is prone to a directory traversal vulnerability. When extracting untrusted source packages in v2 and v3 source package formats that include a debian.tar, the in-place extraction can lead to directory traversal situations on specially crafted orig.tar and debian.t... <https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2022-1664> | 17:41 |
| === vxwarlock is now known as vx_darkfallen | ||
| arraybolt3[m] | tanul1989: CVE detecting tools may simply be checking the software version, not the actual presence of the vuln. If you're using an old but patched software version (like Ubuntu does all over the place), you may still be told about the CVE even if it isn't actually there. | 17:42 |
| arraybolt3[m] | tanul1989: If you have someone who skilled at cybersecurity in your corner, you could ask them to try and hit the vulnerability to see if it's there or not. | 17:43 |
| tanul1989 | oh ok.. So that's the game | 17:43 |
| arraybolt3[m] | tanul1989: This is why penetration testers exist - nothing tells you a vuln exists like having someone exploit it, and if the person exploiting it also happens to be on your side, then everything's good. So long as you prepare for any mayhem that ensues when the vuln is exploited (so probably don't run a penetration test on production!). | 17:43 |
| oerheks | https://snapcraft.io/cvescan | 17:44 |
| tanul1989 | actually this cvescan I can't install.. Its a Azure kubernetes node | 17:48 |
| tanul1989 | But that is problem with prisma cloud. Now my security team is forcing me to resolve them.. Where as they are actually already resolved.. | 17:49 |
| manwhowouldbekin | tomreyn, Are you here? | 17:49 |
| tanul1989 | For example I have just checked for one more CVE-2022-1292.. Its in openssl.. And resolved in Released (1.1.1-1ubuntu2.1~18.04.17) | 17:50 |
| ubottu | The c_rehash script does not properly sanitise shell metacharacters to prevent command injection. This script is distributed by some operating systems in a manner where it is automatically executed. On such operating systems, an attacker could execute arbitrary commands with the privileges of the script. Use of the c_rehash script is considered obsolete and should be replaced b... <https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2022-1292> | 17:50 |
| tanul1989 | oerheks, arraybolt3[m], But when I'm checking my version then this is installed 1.1.1-1ubuntu2.1~18.04.19 | 17:50 |
| tanul1989 | I think this is also the same thing which arraybolt3[m].. Is referring Am I correct | 17:51 |
| oerheks | the last number is higher than 17, so .. | 17:51 |
| tanul1989 | The vulnerability patch is already there but prisma is showing on the basis of version.. Am I correct?? | 17:51 |
| tanul1989 | yes mine one is higher than 17.. | 17:52 |
| oerheks | prisma cloud, is it in our repos? | 17:52 |
| oerheks | if not, contact the maintainer? | 17:52 |
| tanul1989 | Hmm.. i need ot check with the prisma cloud community | 17:53 |
| enigma9o7[m] | im a subtraction expert, and actually 19 is two higher than 17 | 17:54 |
| oerheks | amazing... | 17:55 |
| tanul1989 | Prisma cloud already has a slack channel.. Asking over there.. What's going on with them | 17:57 |
| AntiGamerPlayzz | sexchat | 18:01 |
| AntiGamerPlayzz | sexchat | 18:01 |
| oerheks | !ot > AntiGamerPlayzz | 18:02 |
| ubottu | AntiGamerPlayzz: Please see my private message | 18:02 |
| AntiGamerPlayzz | ? | 18:02 |
| enigma9o7[m] | you gotta put /j first | 18:02 |
| enigma9o7[m] | i.e. /j #sexchat | 18:02 |
| AntiGamerPlayzz | L | 18:02 |
| AntiGamerPlayzz | windows: i hope this dosent have a virus mac os:if its on the app store i can run it linux: i hope this command dosent take forever to fill out | 18:04 |
| AntiGamerPlayzz | windows: i hope this dosent have a virus. mac os:if its on the app store i can run it linux: i hope this command dosent take forever to fill out | 18:04 |
| arraybolt3[m] | AntiGamerPlayzz: This is the Ubuntu support channel. Off-topic discussions are generally not permitted here. | 18:04 |
| javaJake | Last week I added a ZFS pool to my Ubuntu Desktop 22.04 install. Today, I found it completely removed. I had to import it by hand for it to become present again. What's the correct way to add pools to Ubuntu so I don't have to fight the OS? :( | 18:13 |
| oerheks | https://ubuntu.com/tutorials/setup-zfs-storage-pool#1-overview handy wiki | 18:14 |
| lotuspsychje | javaJake: there are known bugs around on 22.04 + zfs + encrypted aswell (if thats your case) | 18:15 |
| javaJake | I'm not doing anything fancy. I am using a vanilla Ubuntu 22.04 Desktop with the official ZFS support enabled. I don't tweak my system much at all. I used all the included zfs/zpool tools that are installed by default. | 18:15 |
| javaJake | oerheks: this is what I did | 18:15 |
| manwhowouldbekin | Hi, all. What is the safest and most reasonable way to uninstall old kernels? In the past year or so, I built mainline kernels from source and installed them (mostly to try new features). I am currently running 5.16.0+ on Ubuntu 22.04. I would like to remove all others. https://termbin.com/6kfb | 18:16 |
| javaJake | lotuspsychje: I don't use encryption. The only ZFS option I changed is the mountpoint for the new pool. | 18:16 |
| tanul1989 | one small question does dpkg version 1.20.10 comes with ubuntu18.04.6 LTS | 18:16 |
| lotuspsychje | ok, then the bug prob wont be your case then javaJake | 18:17 |
| leftyfb | manwhowouldbekin: sudo apt remove <package name> | 18:17 |
| enigma9o7[m] | How did you install them? You can autoremove a lot of headeras nd stuff, then just apt remove the rest.... | 18:17 |
| leftyfb | manwhowouldbekin: I would not recommend removing all of the native(supported) kernels | 18:17 |
| enigma9o7[m] | i have dpkg 1.19.0.5 on bionic tanul | 18:17 |
| tanul1989 | Me too have the same version | 18:19 |
| oerheks | nope, there is no such 1.20.10 .... https://launchpad.net/ubuntu/+source/dpkg | 18:20 |
| tanul1989 | I don't know what prisma cloud wants.. I think they have some place from where they get 2 know the latest version of packages and start throwing the vulnerabilities | 18:20 |
| oerheks | and unlikely it will be backported, you will get bugsfixes, but numbering stays the same | 18:21 |
| oerheks | you might want to switch to Jammy 22.04... | 18:21 |
| tanul1989 | oerheks, is it.. Man what is happening with prisma cloud. Can some one suggest how to share a screenshot here | 18:21 |
| tanul1989 | I'll show you the prisma screen shot | 18:21 |
| oerheks | prisma is not under our support. why do you need a higher dpkg? | 18:22 |
| oerheks | it got the latest bugfixes, so.. | 18:22 |
| javaJake | tanul1989: third party software may be unaware of how Ubuntu backports security fixes. See: https://ubuntu.com/security/notices and https://ubuntu.com/security/cves | 18:23 |
| tanul1989 | I don't want latest.. The thing is that our prisma cloud is showing that dpkg version 1.20.10 has resolved this cv 2022-1664.. My point is when this version of package doesn't exist then how they are referring that as a solution | 18:24 |
| manwhowouldbekin | leftyfb, How can I distinguish native(supported) kernels from others? Are native ones the ones I have not built and installed? | 18:25 |
| javaJake | tanul1989: again, prisma cloud is probably not aware of Ubuntu's security procedures. Here's the CVE you are referencing: https://ubuntu.com/security/CVE-2022-1664 | 18:25 |
| ubottu | Dpkg::Source::Archive in dpkg, the Debian package management system, before version 1.21.8, 1.20.10, 1.19.8, 1.18.26 is prone to a directory traversal vulnerability. When extracting untrusted source packages in v2 and v3 source package formats that include a debian.tar, the in-place extraction can lead to directory traversal situations on specially crafted orig.tar and debian.t... <https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2022-1664> | 18:25 |
| arraybolt3[m] | tanul1989: What exactly Prisma Cloud does, we have no idea, as we have no control over them or what they do. You might be able to file a bug report with them or contact their support so they can fix their software. | 18:25 |
| oerheks | tanul1989, but you found out already for bionic one it is resolved in Released (1.19.0.5ubuntu2.4) | 18:25 |
| oerheks | so, it does not match their story | 18:25 |
| leftyfb | manwhowouldbekin: yes | 18:25 |
| tanul1989 | Yeah not a problem. But thank you so much. for redirecting me in correct direction and help resolving the things.. Really helpful. Thank so very much | 18:26 |
| arraybolt3[m] | tanul1989: You'd be surprised what some companies outside the Linux world tell people to do to their Linux systems. I saw some company's technical support tell someone to try to install a driver for Linux kernel 5.19 on an Ubuntu system with Linux 5.19 is still experimental AFAIK. Prisma Cloud having a meltdown over a misunderstanding is not all that surprising to me, sadly. | 18:26 |
| tanul1989 | hmm correct. Its been 8 days.. I'm talking day and night with different people here, microsoft.. Updating aazure kubernetes, its nodes.. Asking in so many communities. Sleeping for max 3 to 4 hours in a day.. And this is what is happening | 18:28 |
| arraybolt3[m] | tanul1989: I'm so sorry. That sounds awful. As a general rule, if your Ubuntu system is fully updated, you're good. And you can always double-check against the Ubuntu security advisories if you're unsure. Here's the search tool: https://ubuntu.com/security/cves | 18:30 |
| tanul1989 | Thank you so much for sharing.. I'll keep that in my notebook.. First thing in the morning.. On slack channel no one is replying in prisma cloud.. First thing in the morning I'll connect with the team who hosted prisma cloud and check with them on this | 18:33 |
| tanul1989 | In my node this is clearly showing that security updates are installed using uattended-upgrades...dpkg/bionic-updates,bionic-security,now 1.19.0.5ubuntu2.4 amd64 [installed,automatic] | 18:34 |
| Mentos | > to try to install a driver for Linux kernel 5.19 on an Ubuntu system with Linux 5.19 | 18:36 |
| Mentos | I mean... Those things match lol ? | 18:36 |
| arraybolt3[m] | Mentos: s/with/when | 18:36 |
| arraybolt3[m] | Meant to say "to try to install a driver for Linux kernel 5.19 on an Ubuntu system, when Linux 5.19 is still experimental AFAIK." | 18:36 |
| arraybolt3[m] | (Ubuntu Kinetic, the latest development version, is still on kernel 5.15.) | 18:37 |
| Mentos | but if that's what they're running.... | 18:37 |
| Mentos | that still makes sense | 18:37 |
| tanul1989 | ok.. See ya.. Take care.. | 18:37 |
| Mentos | It may be ""experimental"" | 18:37 |
| arraybolt3[m] | Mentos: LOL I hate typos. | 18:37 |
| oerheks | Mentos, then you/they need to build that driver yourself.. | 18:37 |
| Mentos | But if that is their query, it seems correct | 18:37 |
| oerheks | such kernel is beyond the scope of this channel | 18:37 |
| Mentos | oerheks: apparently not from what they said... ? | 18:37 |
| arraybolt3[m] | Guys, I was talking about something that happened here before and then typoed. | 18:38 |
| oerheks | i don; t care what they said. 5.19 is experimantal, in mainline, without our support. | 18:38 |
| oerheks | !mainline | 18:38 |
| ubottu | The kernel team supply continuous mainline kernel builds which can be useful for tracking down issues or testing recent changes in the Linux kernel. More information is available at https://wiki.ubuntu.com/Kernel/MainlineBuilds | 18:38 |
| arraybolt3[m] | I meant to say that Ubuntu doesn't use kernel 5.19, and someone came in trying to install a driver for kernel 5.19 because some tech support from an equipment manufacturer told them to do it. That's how misinformed some tech support can be. | 18:38 |
| arraybolt3[m] | My point was what you're saying - it was a bad idea from the start. So don't trust non-Linux companies when it comes to this stuff. | 18:39 |
| oerheks | tell them to build that driver, and a proper dkms package | 18:40 |
| arraybolt3[m] | oerheks: If only... yeah, that would be nice if companies would do that. | 18:42 |
| Mentos | lol | 18:43 |
| Mentos | what is a "linux company" arraybolt3[m] | 18:43 |
| oerheks | Mentos, you called them ' they' | 18:43 |
| arraybolt3[m] | Mentos: Canonical. SuSE. Red Hat. Those kind of companies. Also developer communities like the people behind Arch Linux. | 18:44 |
| Mentos | wat. | 18:44 |
| Mentos | so also loose groups of people | 18:44 |
| Mentos | so... everyone is in a linux company more or less. | 18:45 |
| Mentos | lol | 18:45 |
| Mentos | I send telemetry! | 18:45 |
| arraybolt3[m] | Mentos: These are the people who actually know what they're talking about. Manufacturers (like TP-Link and the like) generally don't have a clear understanding of what they're doing. | 18:45 |
| Mentos | errr | 18:45 |
| Mentos | no. | 18:45 |
| Mentos | that's straight incorrect and misguided | 18:45 |
| Mentos | though i'm also struggling to get a marginally newer realtek wifi card to work on 22.04 so.... | 18:46 |
| Mentos | what do I know I guess xD | 18:46 |
| oerheks | no, you took the experimental route, good luck! | 18:46 |
| Mentos | I sincerely worry for the day Linus passes. | 18:46 |
| Mentos | Because each of these "companies" will take on entirely new roles | 18:46 |
| Mentos | towards proprietarianism to some degree i'll bet | 18:47 |
| arraybolt3[m] | Mentos: LOL pretty much if someone tells you to do "sudo make install", and they expect you to do this on a production system, they don't know what they're talking about. | 18:47 |
| Mentos | arraybolt3[m]: fair | 18:47 |
| Mentos | I understand that point atleast haha | 18:47 |
| arraybolt3[m] | Mentos: Not possible. That's why the GPL exists. Linux will always be GPL software, there's no getting around it. Linus made some very good moves with licensing so that even when he passes, the kernel will forever remain FOSS. | 18:47 |
| arraybolt3[m] | (Responding to the thing about "proprietarianism".) | 18:48 |
| Mentos | lollllll | 18:48 |
| Mentos | gpl is totally irrelevant | 18:48 |
| Mentos | who hotfixes 0days? linus does. | 18:48 |
| Mentos | and it filters down. | 18:48 |
| Mentos | etc | 18:48 |
| dsc_ | I'm not afraid of licensing issue but rather culture changes | 18:48 |
| Mentos | there's stuff only they do for very meager amounts of $$ | 18:48 |
| Mentos | after they pass | 18:48 |
| oerheks | this is ubuntu technica support, join -discuss or -offtopic for chit chat | 18:48 |
| Mentos | it will be ubuntu for ubuntu | 18:48 |
| leftyfb | lets stay on topic please. Feel free to bring non-support discussions to #ubuntu-offtopic | 18:48 |
| arraybolt3[m] | Mentos: Also there's an army of people behind the Linux kernel - if Linux passes, Andrew Morton will probably take his spot I would guess. | 18:48 |
| Mentos | redhat for redhat | 18:48 |
| Mentos | arraybolt3[m]: I mean... You'd hope, but why isn't that the case //NOW// then :P | 18:49 |
| arraybolt3[m] | oerheks: Yeah, you're right. Sorry, we a lot of times allow random off-topic stuff in between support sessions. | 18:49 |
| Mentos | he should already be redundant if that's true | 18:49 |
| Mentos | (tldr; he's not) | 18:49 |
| arraybolt3[m] | But this has gotten a bit messy. | 18:49 |
| Mentos | yeah I will respect the rules also -- I just do find it worrysome | 18:50 |
| arraybolt3[m] | Mentos: Join #ubuntu-offtopic, let's keep going there. I'm in there already. | 18:50 |
| Mentos | though a fully commercialized branch of ubuntu could be great, who knows | 18:50 |
| Mentos | ehh I am tired and trying to get this dang laptop some wifi | 18:50 |
| Mentos | it's finally updated it all | 18:50 |
| Mentos | over bluetooth lol | 18:50 |
| arraybolt3[m] | Mentos: What WiFi card are you using? | 18:51 |
| Mentos | afaik it's a rtl 8822 be | 18:51 |
| Mentos | the previous realtek drivers SHOULD work fine afaik also | 18:51 |
| Mentos | but I need a way to make it use them | 18:51 |
| Mentos | because it "mis-identifies" that it's incompatible | 18:52 |
| arraybolt3[m] | Mentos: Does this work? https://askubuntu.com/questions/1263141/rtl8822be-driver-for-ubuntu-18-04-and-20-04 | 18:52 |
| Mentos | because of the "be" on the end as far as I know | 18:52 |
| tanul1989 | Hello, sorry I come back.. one small question.. OS of this version type Debian GNU/Linux 11 (bullseye) has dpkg 1.20.10 | 18:52 |
| tomreyn | manwhowouldbekin: i am now | 18:52 |
| bin | how do i force apt to remove a package even if another pakcage depends on it | 18:52 |
| leftyfb | bin: that's probably not a good idea | 18:53 |
| Mentos | arraybolt3[m]: so two things | 18:53 |
| Mentos | `git clone https://github.com/aircrack-ng/rtl8812au.git` | 18:53 |
| arraybolt3[m] | bin: Bad idea. What are you trying to achieve? There's probably a better way to do this. | 18:53 |
| ravage | bin, you really should not do that. at least not without also removing the dependent package | 18:53 |
| bin | leftyfb: i dont care if it's a good or bad idea, i jsut want to know how to do it | 18:53 |
| Mentos | grabbing some random profile from github/aircrack | 18:53 |
| leftyfb | lol | 18:53 |
| oerheks | tanul1989, join #debian for that? | 18:53 |
| Mentos | and also that it's for the 8812au | 18:53 |
| arraybolt3[m] | bin: Make sure you have a virtual machine before you try that. | 18:53 |
| Mentos | it was the first result honestly | 18:53 |
| tanul1989 | oerheks, sure.. thanks | 18:54 |
| ravage | Mentos, is it a USB or PCI device? did you provide the device id from lsusb or lspci already? | 18:54 |
| Mentos | but it's pretty.... Unorthodox for just getting basic wifi connectivity in 2022 | 18:54 |
| bin | arraybolt3[m]: youre assuming im not in one right now. | 18:54 |
| dsc_ | bin: you are looking for `--remove --force-remove-reinstreq` which may render your system broken | 18:54 |
| Mentos | ravage: it's what I said as verified from there | 18:54 |
| oerheks | Mentos, you rant is invalid, use the stock kernel. | 18:54 |
| Mentos | but can confirm | 18:54 |
| Mentos | one sec | 18:54 |
| Mentos | oerheks: | 18:54 |
| Mentos | already am clean install just updated/upgraded | 18:54 |
| bin | so anyway now that we've gone past the "no anon dont do it, dont uninstall packages other packages depend on" please tell me how to do it | 18:55 |
| Mentos | 5.15.0.40-generic | 18:55 |
| bin | i am intentionally trying to break something | 18:55 |
| arraybolt3[m] | bin: One moment... | 18:55 |
| bin | ty | 18:55 |
| dsc_ | bin: try `sudo dpkg --remove --force-remove-reinstreq <packagename>` | 18:56 |
| dsc_ | warning: the world may explode | 18:56 |
| Mentos | >.> | 18:56 |
| Mentos | <.< | 18:56 |
| bin | one can only hope | 18:56 |
| bin | ty | 18:56 |
| manwhowouldbekin | tomreyn, Good to hear from you! :) I have an update on that PPA list I have been working on. I have gotten past that package dependency knot with a bunch of similar packages. At the moment, the list looks like this https://termbin.com/5mkj I am looking for some guidance as to what to do. It appears that some of these packages do not have their own PPAs. I have not looked through each one, but I can see from the list | 18:56 |
| manwhowouldbekin | that these packages are mostly the ones I personally installed via .deb files. Also, what would be a prudent thing to do with the kernels? As I wrote above, I am running 5.16.0+ at the moment | 18:56 |
| Adilou159 | Hey | 18:57 |
| bin | ah well | 18:57 |
| bin | it was worth a try | 18:57 |
| bin | pop-desktop prevents the removal of gdm3 | 18:57 |
| arraybolt3[m] | bin: I'd try "dpkg --remove --force-depends". | 18:57 |
| arraybolt3[m] | "Turn all dependency problems into warnings." That will probably do the trick. | 18:58 |
| arraybolt3[m] | Maybe also "dpkg --remove --force-breaks". | 18:58 |
| bin | hm | 18:58 |
| ravage | bin: cat /etc/os-release |nc termbin.com 9999 | 18:58 |
| arraybolt3[m] | bin: And if it's really stubborn, "dpkg --remove --force-all" and enjoy the fireworks. | 18:58 |
| bin | --force-depends worked | 18:58 |
| bin | thank you friends :) | 18:59 |
| dsc_ | np fren | 18:59 |
| gradientwood | hi | 18:59 |
| tomreyn | manwhowouldbekin: installing .deb files yourself is usually bad practice - unless you know these are compatible to / made for your very ubuntu release, and have a plan on how you will get to know about and install security updates. (NB: some software asks you to install this way, and then the package also installs an apt configuration configuration file in /etc/apt/sources.list.d/ so that you actually do have an upgrade path) | 19:00 |
| Mentos | ehhh | 19:00 |
| arraybolt3[m] | Mentos: Aircrack-ng is a pretty popular software package for WiFi security auditing, so I'd trust a WiFi driver from them. | 19:00 |
| Mentos | simpler explanation is to say it's better to use the authoritive source for your distro | 19:00 |
| tomreyn | manwhowouldbekin: about this yet long list : your goal should not exclusively be to find APT repositories providing these packages, but first of all you should consider wherther you actually need these packages, or could just apt purge them. | 19:01 |
| Mentos | otherwise it may lead to <UB> (unexpected behavior) | 19:01 |
| manwhowouldbekin | tomreyn, Right. That's what I have gathered since I began working on this list per your advice. It has been a good learning experience. I guess I have the following question. Suppose I am looking to install a package. Say, it is Dropbox. I go to their site and there is a .deb file. I download it carelessly and lazily. If I search for PPA, I may never find it or it may not even exist. What should one do? | 19:02 |
| tomreyn | manwhowouldbekin: regarding the kernel, if I'm not mixing you up with someone else last night, you said that you cannot use the current kernel version yet because that would somehow make your wireless driver fail to load. is this correct? if so, it would be nice to see a dmesg of the system booting with a current kernel. | 19:02 |
| manwhowouldbekin | tomreyn, That makes sense. I can definitely purge some of these, as I am not using them. Some others (like pgadmin3) I can probably upgrade to newer versions. | 19:03 |
| leftyfb | manwhowouldbekin: dropbox is a bad example. Installing their deb also enables their repository for future updates | 19:03 |
| Mentos | SO! | 19:03 |
| manwhowouldbekin | tomreyn, That was not me about the wifi and the kernel. | 19:03 |
| Mentos | I have installed "rtl8812au-dkms" | 19:03 |
| Mentos | and! | 19:03 |
| arraybolt3[m] | Mentos: And? | 19:03 |
| Mentos | "rtl8821ce-dkms" | 19:03 |
| Mentos | And now what | 19:03 |
| manwhowouldbekin | leftyfb, Go figure lol. Well, some other abstract example, then. | 19:04 |
| arraybolt3[m] | Mentos: Oh no, so now you have both drivers installed? Or did you only install one? | 19:04 |
| leftyfb | manwhowouldbekin: basically, you should never install a .deb you find from anywhere unless you know what you are doing or plan on and are able seek support from the source of the package | 19:04 |
| arraybolt3[m] | Mentos: If you only installed one, I'd try rebooting and see what happens. | 19:05 |
| arraybolt3[m] | Mentos: If you installed more than one, then... | 19:05 |
| manwhowouldbekin | leftyfb, Fair enough. That is an grown up way of doing things. | 19:05 |
| tomreyn | manwhowouldbekin: when it comes to proprietary software like dropbox, your options are usually: either use the packages provided by the company providing the service offering / proprietary software, or - sometimes a better choice - find an open source alternative which speaks the same protocol and can act as a drop-in replacement, or which provides similar functionality. | 19:05 |
| tomreyn | manwhowouldbekin: but before you just download a .deb and install it, you should actually make sure it's compatible to your release, and that the .deb file is authentic (verify checksums, better verify cryptographic signatures, where available) | 19:07 |
| tomreyn | manwhowouldbekin: and use apt to install a .deb file, not just dpkg | 19:07 |
| tomreyn | (becuase apt will attempt to resolve its dependencies) | 19:08 |
| manwhowouldbekin | tomreyn, I have also wondered about why some of these companies don't create their own PPA's. I guess, some of them do. | 19:08 |
| tomreyn | manwhowouldbekin: some do, but sadly don't tell you how you could properly install from there. | 19:09 |
| manwhowouldbekin | tomreyn, Thanks for the tips! I used to install things with dpkg quite a bit. A lot of tutorials seem to recommend it. | 19:09 |
| ravage | manwhowouldbekin, https://thelig.ht/code/dbxfs/readme.html just as an example on how you could avoid that client :) | 19:09 |
| leftyfb | manwhowouldbekin: I don't see the benefit. Would you trust https://launchpad.net/~dropbox/+archive/ubuntu/ppa over http://linux.dropbox.com/ubuntu ? | 19:10 |
| manwhowouldbekin | ravage, Thanks! In this case, I have actually decided to go self-hosted and get the Nextcloud going on a separate Debian :D | 19:11 |
| ravage | that is even better of course :) | 19:11 |
| ravage | for a lot of other cloud storages rclone usually is a good tool | 19:11 |
| leftyfb | manwhowouldbekin: you misspelled ubuntu | 19:11 |
| manwhowouldbekin | ravage, Will check it out. | 19:12 |
| manwhowouldbekin | leftyfb, Oops | 19:12 |
| manwhowouldbekin | tomreyn, Could you tell me if this means that currently Git is not associated with any PPA and was installed in a "weird" way? https://termbin.com/ere7e | 19:15 |
| leftyfb | it's associated with a ppa | 19:15 |
| leftyfb | sorry, it WAS associated with a ppa | 19:16 |
| leftyfb | the ppa is no longer enabled | 19:16 |
| manwhowouldbekin | leftyfb, Should I downgrade it to a version listed below, so it gets reassociated with a valid PPA? | 19:24 |
| ravage | if you want to get any security updates thats a good idea | 19:26 |
| ravage | and the ubuntu archives are not a PPA | 19:27 |
| manwhowouldbekin | ravage, What are they? | 19:28 |
| ravage | the repository that provides the offical ubuntu packages | 19:29 |
| tomreyn | !ppa | manwhowouldbekin | 19:30 |
| ubottu | manwhowouldbekin: A Personal Package Archive (PPA) can provide alternate software not normally available in the offical Ubuntu repositories - Looking for a PPA? See https://launchpad.net/ubuntu/+ppas - WARNING: PPAs are unsupported third-party packages, and you use them at your own risk. See also !addppa and !ppa-purge | 19:30 |
| tomreyn | ubuntu's main reposiitories (hosted on archive.ubuntu.com and many mirrors) are not a "personal package archive". more importantly, for some of them, security support is guaranteed. | 19:31 |
| manwhowouldbekin | tomreyn, Makes sense. That is what I need. Done. | 19:32 |
| tomreyn | (this doesn't rule out that someone maintaining a PPA would also make such guarantees - but it may make a difference to you whether one of the leading linux distros offers such a guarantee or some single (?) person does so for their personal package archive) | 19:33 |
| LambdaComplex | i'm just starting an Ubuntu install to a Thinkpad X1 Carbon....do i dare ask how/why there was a "Lenovo" splash screen while the installer was loading? | 19:33 |
| manwhowouldbekin | tomreyn, Absolutely. Makes great sense. | 19:34 |
| manwhowouldbekin | tomreyn, There are certain packages on that list about which I know nothing. Hence, I am wondering whether the following is a good idea. I run something like 'sudo apt remove libpangox-1.0-0' and see what other packages become "unneeded" as apt tries to remove this one. If among the "unneeded" packages there are some that I actually know and need, then I keep the candidate. If there are none, then I can probably remove | 19:38 |
| manwhowouldbekin | the candidate. Am I missing something? | 19:38 |
| tomreyn | LambdaComplex: that's uefi bootng with Plymouth, part of the 'flicker free boot' set of changes. it's just a matter of presentation, the logo showing there is a 'leftover' of the graphical uefi boot, but it doesn't mean that your ubuntu installation is somehow adjusted to this vendor - that's unless you installed using installation media provided by the vendor. | 19:38 |
| tomreyn | manwhowouldbekin: good strategy, but use "purge" rather than "remove", to also remove residual configurations. and maybe run apt show <package> and see the "Description:" filed before you do that | 19:40 |
| LambdaComplex | tomreyn: i.e. the image is coming from the uefi firmware itself? | 19:40 |
| tomreyn | LambdaComplex: yes, i think so. if you mind it, you can switch to a different plymouth theme or, maybe easier, just disable graphical booting. | 19:42 |
| arraybolt3[m] | LambdaComplex: I believe that's right. You can actually hunt around in the UEFI firmware directory made by a Linux system to show the contents of your UEFI stuff, and find the logo there. | 19:42 |
| arraybolt3[m] | (At least, I did that once. Can't seem to find it on the system I'm on now...) | 19:47 |
| manwhowouldbekin | tomreyn, In cases like these https://packages.ubuntu.com/search?suite=default§ion=all&arch=any&keywords=libmpdec2&searchon=names , should one remove the package? There does not appear to be a version for Ubuntu 22.04. Does this automatically imply that the package is not critical for this release and can be removed? | 19:48 |
| ioria | !info libmpdec3 jammy | 19:51 |
| ioria | manwhowouldbekin, ubottu is dead, but on 22.04 you use libmpdec3 | 19:53 |
| manwhowouldbekin | ioria, I see! | 19:55 |
| manwhowouldbekin | ioria, When I try to purge libmpdec2, it also says that the following will be removed as well "libmpdec2* libpython3.8* libpython3.8-stdlib*". What's the story with the Python packages? These are on my clean-up list as well, but I am unsure whether they are safe to remove. | 19:59 |
| tomreyn | manwhowouldbekin: right, if there's a version number in the package name, try searching packages.ubuntu.com without that number. it does a substring search by default | 20:00 |
| ioria | manwhowouldbekin, are you on 22.04 ? | 20:00 |
| manwhowouldbekin | ioria, Yes, 22.04 | 20:01 |
| ioria | manwhowouldbekin, and why do you have python3.8 and libmpdec2 installed ? | 20:01 |
| ioria | manwhowouldbekin, and why do you have python3.8 and libmpdec2 installed ? | 20:01 |
| manwhowouldbekin | ioria, Not sure. Python I use for progamming. The other one I do not know anything about. | 20:02 |
| tomreyn | how to find out which python 3.x version a given ubuntu release comes with / defaults to: https://packages.ubuntu.com/search?suite=default§ion=all&arch=any&keywords=python3&searchon=names&exact=1 | 20:03 |
| ioria | manwhowouldbekin, did yo perform a do-release-upgrade ? | 20:03 |
| ioria | *you | 20:03 |
| funhouse | I am trying to log in via ssh to another server, ssh root@address -i MY_KEY, i am in the current directory of the key but I am getting this: | 20:03 |
| tomreyn | manwhowouldbekin: if there's another one installed then that's probably a leftover from before a release upgrade, which did not reach its clean up phase (failed somewhere in the middle). | 20:04 |
| manwhowouldbekin | ioria, Yes, back in April. I believe so. Did an upgrade via command line. | 20:04 |
| funhouse | Permissions 0664 for 'MY_KEY' are too open. | 20:04 |
| funhouse | It is required that your private key files are NOT accessible by others. | 20:04 |
| funhouse | This private key will be ignored. | 20:04 |
| funhouse | Load key "MY_KEY": bad permissions | 20:04 |
| manwhowouldbekin | tomreyn, Sounds reasonable. 3.10 for Jammy it is. | 20:04 |
| ioria | manwhowouldbekin, but you didnt perform a cleanup | 20:04 |
| tomreyn | funhouse: and your question is? | 20:05 |
| manwhowouldbekin | ioria, Unless there is a special command for it, I am doing it manually now. | 20:05 |
| ioria | manwhowouldbekin, apt -s autopurge | 20:05 |
| ioria | manwhowouldbekin, check the list and if it's ok (it should be), use sudo | 20:06 |
| === tsujp_ is now known as tsujp | ||
| funhouse | ssh root@address -i ~/.ssh/MY_KEY.pem | 20:16 |
| funhouse | is this the correct syntax? | 20:16 |
| ravage | if you ask then it is probably not working as expected? | 20:18 |
| ravage | in general that look ok | 20:18 |
| leftyfb | funhouse: don't ssh as root. You should disable it in the sshd_config | 20:18 |
| === mrkubax101 is now known as mrkubax10 | ||
| tomreyn | funhouse: your error message explained what the problem is | 20:20 |
| tomreyn | funhouse: it is about the permissions of the secret key file on your local computer | 20:21 |
| ravage | oh. i missed that error message. was rebooting my bouncer :) | 20:21 |
| tomreyn | ravage: oh, so you caused the netsplit! | 20:22 |
| ravage | :D | 20:22 |
| ravage | i guess i caused my personal mini netsplit. was there a bigger one? i have join/parts disabled. | 20:23 |
| tomreyn | there was | 20:24 |
| funhouse | ok so getting this error when trying to ssh into a server --> Load key "MY_KEY": invalid format | 20:28 |
| funhouse | i chmod 600 already | 20:28 |
| funhouse | does that mean its not pem format? | 20:28 |
| leftyfb | funhouse: pastebin your private key here and we'll tell you | 20:29 |
| tomreyn | funhouse: dont | 20:30 |
| leftyfb | funhouse: you should not be ssh'ing as root | 20:30 |
| leftyfb | funhouse: that said, how did you generate the ssh key pair? | 20:31 |
| tomreyn | leftyfb: please don't ask people to disclose private key material | 20:31 |
| tomreyn | funhouse: your new error message suggests an incompatible or broken private key | 20:37 |
| tomreyn | running ssh-keygen -l -f path/to/MY_KEY or file path/to/MY_KEY would hint on what it is | 20:38 |
| ravage | my wild guess is that you created that key in putty in windows | 20:39 |
| enperry | hello fellow linux users | 20:45 |
| enperry | hello | 20:48 |
| ravage | !chat | enperry | 20:48 |
| ubottu | enperry: #ubuntu is the Ubuntu support channel, for all Ubuntu-related support questions. Please register with NickServ (see /msg ubottu !register) and use #ubuntu-offtopic for other topics (though our !guidelines apply there too). Thanks! | 20:48 |
| === Polo__ is now known as Polo | ||
| === Polo is now known as money | ||
| === CodeMouse92 is now known as Guest6614 | ||
| === Guest6614 is now known as CodeMouse92 | ||
| === sig is now known as bebop | ||
| syphyr | whats the easiest way to show how much memory a PID is using in Kb? | 23:19 |
| syphyr | top -p PID | 23:21 |
| syphyr | trying to figure out how to make top show memory usage in Kb | 23:21 |
| sarnold | "how much memory is this process using" is a remarkably difficult thing to answer | 23:22 |
| sarnold | hitting 'e' and 'E' in top can change the units, which might be all you want | 23:22 |
| syphyr | top in incredibly complicated | 23:22 |
| syphyr | is* | 23:22 |
| syphyr | tnx ill try that | 23:23 |
| sarnold | but also look at the smem program in the smem package; it shows you how much 'blame' each process should get for the system's currently used memory -- processes can share memory, so killing a large process that shares a lot of memory might do less good for freeing up memory than killing a small process with no shared memory | 23:23 |
| syphyr | 'e' and 'E' seems to just toggle total system memory in top | 23:25 |
| syphyr | also 'm' | 23:25 |
| syphyr | ill look at smem thanks | 23:25 |
| sarnold | 'e' changes the units on the processes; 'E' changes the units on the system | 23:27 |
| sarnold | 'M' sorts by memory, but it's not a sort I put a ton of faith in :) | 23:27 |
| syphyr | what about cat /proc/PID/statm | 23:28 |
| sarnold | sure, if that's the data you're after :) | 23:28 |
| syphyr | ahh, now i get top | 23:29 |
| syphyr | 'e' works ;) | 23:29 |
| syphyr | thanks | 23:29 |
| imi | what does snap refresh --classic do? is it safe to make firefox and gnome classic? | 23:56 |
| sarnold | I think --classic only works on a handful of snaps that were designed to work that way; I don't think you can just do that to anything | 23:59 |
Generated by irclog2html.py 2.7 by Marius Gedminas - find it at mg.pov.lt!
