 Omg i need help for the harddrive i mentioned in #ubuntustudio.
 But notebook with irc is off.
 My friend said before on the hard drive was apfs file system and the drive shows up double as sda and sdc. He said he had before a hackintosh and now i should reformat it so it is not doubled. I searched on google but there is nothing i can use. Can i just do a new partition table and then its reformatted to normal state?
[00:18] <arraybolt3[m]> Oski146: APFS shouldn't cause it to show up doubled like that. You'd have multiple partitions like sda1 and sda2.
[00:18] <arraybolt3[m]> Oski146: Type "lsblk" to figure out which drive is which.
[00:18] <arraybolt3[m]> (The "other drive" you see is probably your USB flash drive.)
[00:19] <arraybolt3[m]> @Oski146: Once you figure out which drive is your main internal drive, you can then just install over the top of the whole disk and erase everything.
 Sounds like a hybrid drive, actually. Means it has a small SSD and a larger HDD in the same housing.
[00:19] <arraybolt3[m]> @Oski146: And if it's really stubborn, there's a command to force it to act right, but I'll wait to share that until we know if we need it, since it is a dangerous command if you mess up.
[00:20] <arraybolt3[m]> @Eickmeyer: Oh, I didn't know those would pop up like that.
 I could be wrong.
[00:20] <arraybolt3[m]> @Oski146: Do "lsblk | nc termbin.com 9999" in a terminal and send the link, that will help.
 But that's what it seems like to me.
[00:20] <Guest1451> hi there, anyone had problems verifying their emails on kubuntu forums?
 Ok ill do (re @IrcsomeBot: <arraybolt3[m]> @Oski146: Do "lsblk | nc termbin.com 9999" in a terminal and send the link, that will help.)
[00:20] <arraybolt3[m]> (That will show us all the drives in your system.)
 Ok i did
[00:22] <arraybolt3[m]> It should spit out a link, send that link in the chat.
 Termbin.com/eltyb
[00:23] <arraybolt3[m]> ?!? ok sdc is your flash drive, but sda and sdb... Can you afford to lose data on this system? If so, I'll have you run some destructive commands so we can see if this really is one drive or if it's two.
[00:24] <arraybolt3[m]> (The fact that sda has a partition and sdb doesn't sounds like you have two disks in this system, unless hybrid drives look like that.)
 Sdb is the usb stick
 Sda is the harddrive i install studio on
 Idk if he has a thrid drive in this pc
 Third
[00:25] <arraybolt3[m]> sdc1 is mounted to /cdrom, which means it's the USB drive (I can also tell by the size). sda and sdb are internal drives.
[00:25] <arraybolt3[m]> You're using an 8 GB USB stick, right?
 Yes (re @IrcsomeBot: <arraybolt3[m]> You're using an 8 GB USB stick, right?)
 But its 2 drives of the same size with 320 gb
 Idk what this is
[00:26] <arraybolt3[m]> Yeah, then sdc is the USB drive, sda is an internal drive, and sdb... is a mystery. So, if you can afford to lose data on the system, can you run "sudo mkfs.fat32 /dev/sdb" in a terminal? (This will wipe everything on sdb, so if there's important data on this, don't run that command.)
 When studio is installed i come back here and we do the critical commands
 If i must reinstall then, no data are lost
[00:27] <arraybolt3[m]> (Actually, it's "sudo mkfs.fat -F32 /dev/sdb".)
[00:27] <arraybolt3[m]> Sorry, botched the command the first time, the second command should be right.
 1 minute i can run the command and then i can give ypu more info about it
[00:28] <arraybolt3[m]> OK, no problem.
 terminal opened.
 Usb stick is out. Now i do lsblk again
[00:30] <arraybolt3[m]> Yeah, and show us the output ("lsblk | nc termbin.com 9999" and send the link).
 termbin.com/mope
[00:33] <arraybolt3[m]> Yeah, I think you have two internal drives in this system. Format sdb with KDE Partition Manager.
 Ok thanks . Now o can do the dualboot. Thanks for the help here and in other channel too
[00:34] <arraybolt3[m]> If you want to be good and sure sdb is a separate disk there's one more command we can run.
 Ok
[00:35] <arraybolt3[m]> sudo dd if=/dev/zero of=/dev/sdb
[00:35] <arraybolt3[m]> (Make good and sure you don't make any typos.)
 Ok i will do it
[00:35] <arraybolt3[m]> This will zero out the entire sdb disk - if your system is fully functional after this finishes, then that really is almost without question a separate disk, and you now have 320 GB of expansion space!
 Ok, thanks for this information.
 Its running rn
 How long does it take Normally?
[00:38] <arraybolt3[m]> Pretty long, might be 30 minutes to an hour.
 Ok 😱
[00:40] <arraybolt3[m]> When it finishes reboot the computer. If that works, you should be good.
 Ok i will do thanks for all
 (When this takes 1 hour, i get ready for breakfast
 1 question i have, is , why is the cdrom drive away? The pc has no drives
[00:42] <arraybolt3[m]> The ISO file is technically made for burning to a DVD drive, but it also works on a USB drive thanks to a special design. So it kind of carries over.
[00:43] <arraybolt3[m]> The USB drive is, in a way, "pretending" to be a DVD drive.
 Ok so thats why it appeared... Didnt know that linux mounts usb drives with iso on it as cdrom
 Now i jave learned some interesting things
 Is it a kde bug? Or a studio bug? That the letters are on big screens weird?
 https://irc-attachments.kde.org/e08abf5c/file_58311.jpg
 https://irc-attachments.kde.org/bb6a4017/file_58312.jpg
[00:55] <mmikowski> That looks like a display hardware issue.
 Ok so a 4k tv is not usable
[00:56] <mmikowski> That's a virtual terminal, right? Not X11 or wayland.
 Its the terminal of ubuntu studio
 Its installed
[00:56] <mmikowski> But is that in X11 or Wayland?
 Idk
[00:57] <mmikowski> The pixels look very tiny.
 How can i check?
[00:57] <mmikowski> Do you see anything else on your screen? Windows, apps, browser?
 Yes
[00:57] <mmikowski> Or is it all a black-and-white terminal?
 But the same like  the letters
[00:57] <mmikowski> I see
 I will show you
[00:58] <mmikowski> Looks like some scaling issues
 https://irc-attachments.kde.org/b1e19b97/file_58313.jpg
[00:58] <mmikowski> what do you have set for your display resolution?
[00:58] <mmikowski> Yeah, that's bad.
 1920 x1080
 More isnt possible its a 4k 50inch tv
[00:59] <mmikowski> Ah, can you change that to 3840x2060?
 No
[00:59] <mmikowski> Why not? If you go to System Settings > Displays, you should be able to pick a 4k resolution.
 I think the graphics card is not able to do 4k
[01:00] <mmikowski> If you do that, it *could* greatly improve quality.
 The highest option is 1920x1080
[01:00] <mmikowski> Beyond that, the connection look very bad. What is your GPU?
[01:00] <mmikowski> And what is the connection cable?
 Gpu is amd radeon hd 7570 in his pc
 Its a hdmi cable
[01:01] <mmikowski> FWIW, resolution can be limited by a bad connection.
 1.4 or something
[01:01] <mmikowski> What is your refresh rate?
 60 hertz
[01:02] <mmikowski> You can sometimes lower the refresh rate to something like 20 or 30 Hz, and then increase the resolution.
 But i got this bug on my notebook too, when i installed studio, with a 2k screen
 Ok i check (re @IrcsomeBot: <mmikowski> You can sometimes lower the refresh rate to something like 20 or 30 Hz, and then increase the resolution.)
 With 30 hertz it looks better, do you think the cable is broken?
[01:04] <mmikowski> https://superuser.com/questions/1147401
 When i change back to 60 hertz its normal again
 Without the weird
[01:05] <mmikowski> So the display is affected by Board, Board Adaptor, Cable, and Monitor Adaptor.
 Ok i have read it on your link
[01:05] <mmikowski> So the short answer is "maybe" ;)
 I need some 2.1 cables and use the 5v hdmi port
[01:06] <mmikowski> Possibly, BUT the card may not handle 2.1 (highly likely).
[01:06] <mmikowski> Or the TV may not handle 2.1 (possible)
 Okay ... But i changed back from 30 to 60 and it looks normal now
 Tv is capable of 2.0 (re @IrcsomeBot: <mmikowski> Or the TV may not handle 2.1 (possible))
[01:06] <mmikowski> Does 30Hz look better?
 I changed to 30 it looked better. Then back to 60, looks then same as 30 (re @IrcsomeBot: <mmikowski> Does 30Hz look better?)
[01:07] <mmikowski> Hmmm, odd.
 I will try another HDMI port and a nother cable
[01:08] <mmikowski> Well I think you are on the right path.
 Thanks
[01:08] <mmikowski> Yes, DP is best if you can do it. you can also get a DP-to-hdmi converter.
[01:09] <mmikowski> This will work best if the board output does not support later HDMI output.
[01:09] <mmikowski> *output => versions
[01:09] <mmikowski> You can get these for ~$7
[01:09] <mmikowski> best of luck!
 Thank you
 😊
 Or i get a hdmi to dp cable
 I set the caling to 150% i hope this looks better
[01:55] <user|6> no puedo conectarme a internet de cable.algun dato ?
[01:55] <arraybolt3[m]> !es | user|6
[01:55] <arraybolt3[m]> Estoy en #kubuntu-es si necesitas ayuda.
[08:15] <user|18> Hi, how can I upgrade my Kubuntu 20.04 to 22.04 ? Do I need to do a clean install or there is another method ?
[08:29] <diogenes_Vx15> !upgrade | user|18
[08:35] <user|18> Great...thank you for your time.
 😘
 I have a Kubuntu/Win10 dual boot system. How can I save the session I have here in Kubuntu and boot to windows? Is there some kind of hibernate function which allows me to select another os from grub for the next boot and then later return to Kubuntu with everything open as it was?
[12:36] <BluesKaj> Hi all
[13:21] <user|64> hi
 I wouldnt recommend saving the session on dualboot machines (re @npeippo: I have a Kubuntu/Win10 dual boot system. How can I save the session I have here in Kubuntu and boot to windows? Is there some kind of hibernate function which allows me to select another os from grub for the next boot and then later return to Kubuntu with everything open as it was?)
 Hibernate off
 Okay
 In kubuntu you can save your opened windows for the xsession
 Fir next login
 I can show you how
 Must run to work now, but thanks :)
 Here the forst one in the red circle : https://irc-attachments.kde.org/7091c0bc/file_58327.jpg
 Idk how the setting is  called in english
 Speaking of hibernation 😃
 My PC power off almost immediately after I click Sleep.
 And when I press the power button the system won't boot up.
 I need to say some logs (errors?) show up when normally booting.
 Just type in session in settings search, and then in the list on the left desktop session or something (re @npeippo: Must run to work now, but thanks :))
[13:57] <Elliria> Hey there. I use Kubuntu 22.04 LTS and have a few GTK programs. I've been getting theme parsing errors about an expected semicolon (see the https://bpa.st/HTUA page). Does anyone know which file I should look in to chase down that missing semicolon and fix it?
 Elezioni, i primi sondaggi sulle coalizioni: Pd meglio senza M5s. Centrodestra sopra il 45%. E l’86% dei suoi elettori gradisce Meloni premier - Il Fatto Quotidiano
 https://www.ilfattoquotidiano.it/2022/07/25/elezioni-i-primi-sondaggi-sulle-coalizioni-pd-meglio-senza-m5s-centrodestra-sopra-il-45-e-l86-dei-suoi-elettori-gradisce-meloni-premier/6741812/
 No italiano? (re @go_mario: Elezioni, i primi sondaggi sulle coalizioni: Pd meglio senza M5s. Centrodestra sopra il 45%. E l’86% dei suoi elettori gradisce Meloni premier - Il Fatto Quotidiano
 https://www.ilfattoquotidiano.it/2022/07/25/elezioni-i-primi-sondaggi-sulle-coalizioni-pd-meglio-senza-m5s-centrodestra-sopra-il-45-e-l86-dei-suoi-elettori-gradisce-meloni-premier/6741812/)
 !it
 Hmm, worth a try
[17:07] <Iamthehuman1> Hi. I have a Kubuntu-like "distro" called Ubuntu Studio they hate their users and the system is unrealiable and they are hurting Canonical and other Ubuntue. I'd just like to get the notification bubbles to back to the right side. Asking in #ubuntustudio will just lead to haters hatin'. I'm switching to a real distro soon, but I would like the notifications back to right side. This has been locked if I have been away from the computer
[17:08] <Eickmeyer[m]> Iamthehuman1: That is completely not true.
[17:08] <Eickmeyer[m]> !fud | Iamthehuman1
[17:09] <Iamthehuman1> Eickmeyer[m]: you have been hating me for years, because you trust idiots that told you about certain fake pixels from Summer 2005. There, I said what I think is source of your malice towards me
[17:09] <Eickmeyer[m]> I have nothing to do with that!
[17:10] <Iamthehuman1> Eickmeyer[m]: and you were lying last friday, shall I request the logs from irccloud to prove my claim?
[17:10] <Eickmeyer[m]> We were talking about bluetooth!
[17:10] <Iamthehuman1> or are you just incompetent and unaware?
[17:10] <Eickmeyer[m]> !ops | Iamthehuman1 breaking CoC
[17:10] <Iamthehuman1> Yes and I have had no autoconnect problem behaviour in Kubuntu in 2011-2020 nor in KDE neon, so you are liar and hater and incompetent, stop harming everything good
[17:11] <Iamthehuman1> So call the cops on me because your liar hater ass is against the wall of truth
[17:11] <Eickmeyer[m]> Look, I don't know how to fix your autoconnect problem which is why I was redirecting you elsewhere, I was not hating you.
[17:11] <Iamthehuman1> YOUR DISTRO IS THE ONLY ONE THAT HAS AUTOCONNECT TO MANUALLY UNDO
[17:11] <Eickmeyer[m]> #ubuntustudio doesn't have a lot of people to help.
[17:12] <Iamthehuman1> "your" distro
[17:12] <Eickmeyer[m]> Iamthehuman1: Ubuntu Studio is not a disto for the last time! It's a "flavor" of a distro!
[17:12] <hggdh> Iamthehuman1: that is enough, thank you. Please tone down
[17:12] <Iamthehuman1> It is your credentials to be mean, wrong, threatening and hating
 I like ubuntustudio, but when you mess up things on your own...
[17:13] <Eickmeyer[m]> I never threatened you.
 Please stop spam can someone block the human who is calling the people here liars and haters and racist?
 Huh, some action her3
 Huh, some action here
[17:26] <Eickmeyer> Let's just move on and get back on topic.
 @Eickmeyer are you giving support here?
 For studio? Oder just in irc?
 For studio? Or just in irc?
 @Oski146 On the stuff that I can and when I can. I work on the Kubuntu Focus line of computers (kfocus.org) and Ubuntu Studio is kindof a side-volunteer-project of mine.
 I need some help with translations. Some of the applications are not in my native language and at the language settings the download button is not functioning so i had to google how to translate krita to german, and other applications
 There is a orange triangle at language settings , when you click the download button, nothing happen
 Which applications specifically?
 Almost all
 And nothing pops up to install my language
 Some apps are german, but the most english
 Oh. Well, most should handle the system locale, but for others the translation might simply not be available. I'd check with support for the individual applications.
 It varies application to application.
 Ok then i look into german ubuntu Forums, they have german instructions to do the things for the apps
 That's probably a good idea.
 Thanks
 You also might check IRC.
 Ok i will 😊
[17:45] <Eickmeyer> !de | @Oski146
 German ircs are not many people
 Yeah, but it's worth a shot. :)
 Ok i will ask there
 When i get jo response from there i will come to studio irc in english
 Sure. FYI, Studio Controls doesn't have translations (yet), and we don't exactly know how to implement that.
 I start my workday in about 10 minutes, so my response time here will be very limited.
 Ok, but for the other translations. A little bit english is not that bad but almost all is english.. i manually installed the kde language pack at the morning so half is german
 Ok no problem (re @Eickmeyer: I start my workday in about 10 minutes, so my response time here will be very limited.)
 Right, that will get your interface in German, which is good, but there are probably several applications that don't honor the rest. You might try installing 'language-pack-gnome-de' and 'language-pack-gnome-de-base' to see if that helps.
 Ok thanks for your help i will look into it
 See you 😊
 Have a great day! o/
[22:08] <gary_> hi
[22:09] <gary_> does anyone know how to start up a pyhton3 app
[22:10] <gary_> do i need to use the terminal or do i need a special python3 terminal to start the pyhton 3 app
[22:16] <cbreak> on the terminal: python3 path-to-your-script
[22:16] <cbreak> if it's executable and has the right #!, it should work when opening like a normal program too
 Some python sricpts like the ones for hackintosh recovery installation just run in terminal
 With arguments and such things
 When you click them, they do nothing until you add the arguments
 Some python sricpts e.g.  like the ones for hackintosh recovery installation just run in terminal
 Some python sricpts e.g.  like the ones for macOS recovery installation just run in terminal