/srv/irclogs.ubuntu.com/2023/05/11/#lubuntu-pt.txt

le4Ola, passando para deixar feedback e sugestao para Lubuntu 23.0416:12
le4instalei um ssd 256gb no lugar do hd500gb16:13
le4Se possivel, otimizar para o sistema iniciar mais rapidamente, boot mais rapido, apos o login ser instantaneo tambem. Abrir os snaps mais rapidamente, abrir tambem os programas mais rapidamente, instantaneamente.16:14
le4Tambem ao usar as teclas de brilho para aumentar ou diminuir, o sistema tem apresentado leves congelamentos porem constantes, ate mesmo a congelar por algum segundo16:16
le4o pc tambem estava travando completamente, e so conseguia voltar a utilizar quando forcava o desligamento. Isso acontecia quando estava com hd500gb, em live do youtube16:18
le4Tambem queria sugerir ao sistema Lubuntu, a manter menor temperatura, abaixo de 30graus se possivel, assim beneficia os que nao tem pc com cooler.16:20
le4tambem um melhor suporte ao acpi, sgx e x509, pci0, mais drivers16:21
le4vou mandar aqui tambem o arquivo com comandos do terminal, e o tlp, para ajudar na otimizacao. Desde ja agradeco16:22
le4# ------------------------------------------------------------------------------16:26
le4# /etc/tlp.conf - TLP user configuration (version 1.4)16:26
le4# See full explanation: https://linrunner.de/tlp/settings16:26
le4#16:26
le4# Settings are read in the following order:16:26
le4#16:26
le4# 1. Intrinsic defaults16:26
le4# 2. /etc/tlp.d/*.conf - Drop-in customization snippets16:26
le4# 3. /etc/tlp.conf     - User configuration (this file)16:26
le4#16:26
le4# Notes:16:26
le4# - In case of identical parameters, the last occurence has precedence16:26
le4# - This also means, parameters enabled here will override anything else16:26
le4# - However you may append values to a parameter already defined as intrinsic16:26
le4#   default or in a previously read file: use PARAMETER+="add values"16:26
le4# - IMPORTANT: all parameters here are disabled; remove the leading '#' if you16:26
le4#   like to enable a feature without default or have a value different from the16:26
le4#   default16:26
le4# Note: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.16:27
le4# Default: 016:27
le4TLP_PERSISTENT_DEFAULT=016:27
le4# Power supply classes to ignore when determining operation mode: AC, USB, BAT.16:27
le4# Separate multiple classes with spaces.16:27
le4# Note: try on laptops where operation mode AC/BAT is incorrectly detected.16:27
le4# Default: <none>16:27
le4TLP_PS_IGNORE="BAT"16:27
le4# Seconds laptop mode has to wait after the disk goes idle before doing a sync.16:27
le4# Non-zero value enables, zero disables laptop mode.16:27
le4# Default: 0 (AC), 2 (BAT)16:27
le4DISK_IDLE_SECS_ON_AC=016:27
le4DISK_IDLE_SECS_ON_BAT=216:27
le4# Dirty page values (timeouts in secs).16:27
le4# Default: 15 (AC), 60 (BAT)16:27
le4MAX_LOST_WORK_SECS_ON_AC=1516:27
le4MAX_LOST_WORK_SECS_ON_BAT=6016:27
le4# Select a CPU frequency scaling governor.16:27
le4# Default: <none>16:27
le4CPU_SCALING_MIN_FREQ_ON_AC=016:27
le4CPU_SCALING_MAX_FREQ_ON_AC=016:27
le4CPU_SCALING_MIN_FREQ_ON_BAT=016:27
le4CPU_SCALING_MAX_FREQ_ON_BAT=016:27
le4# Set Intel CPU energy/performance policies HWP.EPP and EPB:16:27
le4#   performance, balance_performance, default, balance_power, power.16:27
le4# Values are given in order of increasing power saving.16:27
le4# Notes:16:27
le4# - HWP.EPP: requires kernel 4.10, intel_pstate scaling driver and Intel Core i16:27
le4#   6th gen. or newer CPU16:27
le4# - EPB: requires kernel 5.2 or module msr and x86_energy_perf_policy from16:27
le4#   linux-tools, intel_pstate or intel_cpufreq scaling driver and Intel Core i16:27
le4#   2nd gen. or newer CPU16:27
le4# - When HWP.EPP is available, EPB is not set16:27
le4# Default: balance_performance (AC), balance_power (BAT)16:27
le4# !!!!!!!! Warning !!!!!!!!!16:27
le4# When use power-profiles-daemon, Default will be not set,16:27
le4# !!!!!!!! Warning !!!!!!!!!16:27
le4# When use power-profiles-daemon, please use below items carefully.16:27
le4# power-profiles-daemon will monitor no_turbo, if no_turbo is 1,16:27
le4# it will degrade performance cause of high-operating-temperature.16:27
le4# !!!!!!!!!!!!!!!!!!!!!!!!!!16:27
le4CPU_BOOST_ON_AC=116:27
le4CPU_BOOST_ON_BAT=016:27
le4# Set the Intel CPU HWP dynamic boost feature:16:27
le4#   0=disable, 1=enable.16:27
le4# Requires intel_pstate scaling driver in 'active' mode and Intel Core i16:27
le4# 6th gen. or newer CPU.16:27
le4# Default: <none>16:27
le4CPU_HWP_DYN_BOOST_ON_AC=116:27
le4CPU_HWP_DYN_BOOST_ON_BAT=016:27
le4# Minimize number of used CPU cores/hyper-threads under light load conditions:16:27
le4#   0=disable, 1=enable.16:27
le4# Default: 0 (AC), 1 (BAT)16:27
le4SCHED_POWERSAVE_ON_AC=016:27
le4# Separate multiple devices with spaces.16:28
le4# Devices can be specified by disk ID also (lookup with: tlp diskid).16:28
le4# Default: "nvme0n1 sda"16:28
le4DISK_DEVICES="nvme0n1 sda"16:28
le4# Disk advanced power management level: 1..254, 255 (max saving, min, off).16:28
le4# Levels 1..127 may spin down the disk; 255 allowable on most drives.16:28
le4# Separate values for multiple disks with spaces. Use the special value 'keep'16:28
le4# to keep the hardware default for the particular disk.16:28
le4# Default: 254 (AC), 128 (BAT)16:28
le4DISK_APM_LEVEL_ON_AC="254 254"16:28
le4DISK_APM_LEVEL_ON_BAT="128 128"16:28
le4# Exclude disk classes from advanced power management (APM):16:28
le4#   sata, ata, usb, ieee1394.16:28
le4# Separate multiple classes with spaces.16:28
le4# CAUTION: USB and IEEE1394 disks may fail to mount or data may get corrupted16:28
le4# with APM enabled. Be careful and make sure you have backups of all affected16:28
le4# media before removing 'usb' or 'ieee1394' from the denylist!16:28
le4# Default: "usb ieee1394"16:28
le4# - Single queue schedulers are legacy now and were removed together with16:28
le4#   the old block layer in kernel 5.016:28
le4# Default: keep16:28
le4DISK_IOSCHED="mq-deadline mq-deadline"16:28
le4# AHCI link power management (ALPM) for SATA disks:16:28
le4#   min_power, med_power_with_dipm(*), medium_power, max_performance.16:28
le4# (*) Kernel 4.15 (or newer) required, then recommended.16:28
le4# Multiple values separated with spaces are tried sequentially until success.16:28
le4# Default:16:28
le4#  - "med_power_with_dipm max_performance" (AC)16:28
le4#  - "med_power_with_dipm min_power" (BAT)16:28
le4SATA_LINKPWR_ON_AC="max_performance"16:28
le4SATA_LINKPWR_ON_BAT="min_power"16:28
le4# Exclude SATA links from AHCI link power management (ALPM).16:28
le4# SATA links are specified by their host. Refer to the output of16:28
le4# tlp-stat -d to determine the host; the format is "hostX".16:28
le4# Separate multiple hosts with spaces.16:28
le4# Default: <none>16:28
le4BAY_DEVICE="sr0"16:28
le4# Set the min/max/turbo frequency for the Intel GPU.16:28
le4# Possible values depend on your hardware. For available frequencies see16:28
le4# the output of tlp-stat -g.16:28
le4# Default: <none>16:28
le4INTEL_GPU_MIN_FREQ_ON_AC=016:28
le4INTEL_GPU_MIN_FREQ_ON_BAT=016:28
le4INTEL_GPU_MAX_FREQ_ON_AC=016:28
le4INTEL_GPU_MAX_FREQ_ON_BAT=016:28
le4INTEL_GPU_BOOST_FREQ_ON_AC=016:28
le4INTEL_GPU_BOOST_FREQ_ON_BAT=016:28
le4# AMD GPU power management.16:28
le4# Performance level (DPM): auto, low, high; auto is recommended.16:28
le4# Note: requires amdgpu or radeon driver.16:28
le4# Default: auto16:28
le4RADEON_DPM_PERF_LEVEL_ON_AC=high16:28
le4RADEON_DPM_PERF_LEVEL_ON_BAT=low16:28
le4# Dynamic power management method (DPM): balanced, battery, performance.16:28
le4SOUND_POWER_SAVE_ON_AC=016:29
le4SOUND_POWER_SAVE_ON_BAT=016:29
le4# Disable controller too (HDA only): Y/N.16:29
le4# Note: effective only when SOUND_POWER_SAVE_ON_AC/BAT is activated.16:29
le4# Default: Y16:29
le4SOUND_POWER_SAVE_CONTROLLER=N16:29
le4# PCIe Active State Power Management (ASPM):16:29
le4#   default(*), performance, powersave, powersupersave.16:29
le4# (*) keeps BIOS ASPM defaults (recommended)16:29
le4# Default: <none>16:29
le4PCIE_ASPM_ON_AC=performance16:29
le4PCIE_ASPM_ON_BAT=powersupersave16:29
le4# Runtime Power Management for PCIe bus devices: on=disable, auto=enable.16:29
le4# Default: on (AC), auto (BAT)16:29
le4RUNTIME_PM_ON_AC=on16:29
le4RUNTIME_PM_ON_BAT=auto16:29
le4# Exclude listed PCIe device adresses from Runtime PM.16:29
le4# Note: this preserves the kernel driver default, to force a certain state16:29
le4# Use lsusb to get the ids.16:29
le4# Note: input devices (usbhid) and libsane-supported scanners are excluded16:29
le4# automatically.16:29
le4# Default: <none>16:29
le4USB_DENYLIST="1111:2222 3333:4444"16:29
le4# Exclude audio devices from USB autosuspend:16:29
le4#   0=do not exclude, 1=exclude.16:29
le4# Default: 116:29
le4USB_EXCLUDE_AUDIO=116:29
le4# Exclude bluetooth devices from USB autosuspend:16:29
le4#   0=do not exclude, 1=exclude.16:29
le4# Default: 016:29
le4USB_EXCLUDE_BTUSB=016:29
le4# Exclude phone devices from USB autosuspend:16:29
le4#   0=do not exclude, 1=exclude (enable charging).16:29
le4# Default: 016:29
le4USB_EXCLUDE_PHONE=016:29
le4# Exclude printers from USB autosuspend:16:29
le4# Separate multiple devices with spaces.16:29
le4# Default: <none>16:29
le4DEVICES_TO_DISABLE_ON_STARTUP=""16:29
le4# Radio devices to enable on startup: bluetooth, nfc, wifi, wwan.16:29
le4# Separate multiple devices with spaces.16:29
le4# Default: <none>16:29
le4DEVICES_TO_ENABLE_ON_STARTUP=""16:29
le4# Radio devices to disable on shutdown: bluetooth, nfc, wifi, wwan.16:29
le4# Note: use as a workaround for devices that are blocking shutdown.16:29
le4# Default: <none>16:29
le4DEVICES_TO_DISABLE_ON_SHUTDOWN=""16:29
le4# Radio devices to enable on shutdown: bluetooth, nfc, wifi, wwan.16:29
le4# (to prevent other operating systems from missing radios).16:29
le4# Default: <none>16:29
le4DEVICES_TO_ENABLE_ON_SHUTDOWN=""16:29
le4# Radio devices to enable on AC: bluetooth, nfc, wifi, wwan.16:29
le4# Default: <none>16:29
le4DEVICES_TO_ENABLE_ON_AC=""16:29
le4# BAT0: Primary / Main / Internal battery (values in %)16:30
le4# Note: also use for batteries BATC, BATT and CMB016:30
le4# Default: <none>16:30
le4START_CHARGE_THRESH_BAT0=9916:30
le4STOP_CHARGE_THRESH_BAT0=10016:30
le4# BAT1: Secondary / Ultrabay / Slice / Replaceable battery (values in %)16:30
le4# Note: primary on some laptops16:30
le4# Default: <none>16:30
le4START_CHARGE_THRESH_BAT1=9916:30
le4STOP_CHARGE_THRESH_BAT1=10016:30
le4# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.16:30
le4# Default: 016:30
le4RESTORE_THRESHOLDS_ON_BAT=116:30
le4# Control battery care drivers: 0=disable, 1=enable.16:30
le4# Default: 1 (all)16:30
le4NATACPI_ENABLE=116:30
le4TPACPI_ENABLE=116:30
le4TPSMAPI_ENABLE=116:30
le4ufw enable && ufw default deny && ufw status verbose && apt update16:30
le4apt update && apt full-upgrade && apt dist-upgrade && apt autoremove && apt autoclean && apt install -f && apt --fix-broken install && update-pciids && sudo ubuntu-drivers install && snap refresh && apt list --upgradable && sudo fwupdmgr refresh --force && sudo fwupdmgr update16:30
le4snap install steam && apt install --install-recommends wine && apt install --install-recommends tlp dxvk ubuntu-restricted-extras lubuntu-restricted-extras clamav16:30
le4tlp-stat -v16:30
le4nano /etc/tlp.conf16:30
le4ultimo feedback, os jogos nao estao fixos em 60 fps, sao jogos leves, utilizo a steam, com proton experimental, steam play, sombreadores da vulkan em segundo plano, e opengl sempre habilitados. Um jogo que jogo bem e o mudrunner, mas acredito que com as atualizacoes os fps melhora. outro erro que estava acontecendo e que na bateria os fps fica mais16:30
le4alto que na tomada, queria deixar esse feedback tambem.16:30
le4Lenovo ideapad 330 15IGM 81Fn, Intel celeron n4000 (2) 1.10GHz max 2.60GHz, intel UHD 600 i915 Geminilake GLK2, ram 4gb, ssd 256gb ceamere, Lubuntu 23.0416:31
le4Valeu16:31
le4ola, aconteceu outro bug, na bios desliguei o fast boot, e o touchpad falhou no deslizar, estava bem lento o deslizar, outro bug no touchpad ainda e o clique que so funcionava no botao, mas o tocar no touchpad para gerar os cliques nao funcionava, outro bug e o touchpad nao funcionar.18:11
le4esse bug so para se desligar e ligar o pc novamente18:12
le4na bios esta tudo ligado18:12
le4boot seguro total, sgx controlado pela distribuicao, uefi, etc18:14
le4somente a senha de administrador e o fast boot estao desligados18:14
le4quando estava no hd500gb tambem acontecia esses bugs.18:15
le4ja configurei para o clique pelo tocar no touchpad funcionar. Mas algumas vezes no ligar o pc, ao usar a distribuicao, os bugs no touchpad acontecia.18:16
le4acho que e por causa do erro de acpi not found, acpi bios error, pci0, sgx, x509, e driver faltando.18:17
le4lenovo ideapad 330 15IGM 81FN, intel celeron n4000 (2) 1.10GHz Max 2.60GHz, intel UHD 600 i915 geminilake glk2, ram 4gb, ssd 256gb18:19
le4tambem se possivel, otimizar para liberar mais memoria vram para a placa de video, o maximo possivel que a placa pode utilizar, e a velocidade total18:20
le4desde ja agradeco18:20
le4=D18:20

Generated by irclog2html.py 2.7 by Marius Gedminas - find it at mg.pov.lt!