/srv/irclogs.ubuntu.com/2023/08/05/#ubuntu.txt

=== black1 is now known as scottpedia
coresi'm running ubnutu 20.04 and the software update tool is saying "core22" is available. this isn't going to update my whole system to Ubuntu 22.04, right?00:57
MenzadorAlso, for NVIDIA drivers in the main distro, you can use Jockey (Additional Drivers)01:39
tripstahhi! i wonder why doesn't ubuntu detect my motherboard's soundchip. i normally use a dac. it shoes dac and hdmi/displayport there on settings/sound.01:48
rboxwhat does 'aplay -l' say01:48
tripstahrbox: https://pastebin.com/Gt2ckvJk01:50
rboxi would assume card 1 is an onboard audio01:50
tripstahcan't use paste.ubuntu, have an account but no password here.01:50
tripstahrbox: yes, seems so. how to enable it?01:51
rboxits tehre... its enabled01:51
tripstahrbox: but i can't choose to use it from settings/sound.01:52
rboxweird01:52
tripstahit's a new computer, have used it for a few months, didn't try to use the onboard chip before.01:53
bonachi?01:58
=== shokohsc5101 is now known as shokohsc510
nshire_how do I get my ubuntu install to stop installing firefox?03:31
nshire_its a desktop install but i really only use it as a fileserver03:32
rbox"stop installing"?03:32
mybalzitchsudo snap remove firefox03:35
mybalzitch?03:35
nshire_right I did that my03:39
nshire_the problem is when I sudo apt update && upgrade it reinstalls it03:39
nshire_The following NEW packages will be installed:03:39
nshire_  firefox03:39
=== nshire_ is now known as nshire
rboxwhat is the full output03:40
rboxwhat version of ubuntu is this03:40
nshire22.04 lts03:42
nshirerhttps://paste.ubuntu.com/p/JcQw93w2XH/03:43
nshirerbox,03:43
rboxthat looks cut off...03:44
nshiredidn't think you needed to see the 200 other package names that needed to be updated...03:50
nshirehere's the end of it though https://paste.ubuntu.com/p/dTsmfzSKMT/03:50
rboxwell i'd say get it into a good state, since they're some held back packages and what not03:51
rboxthen see if its still trying to reinstall it03:51
toddcnshire: sudo snap remove firefox05:01
nshirethat's what I did already05:01
nshirebut it tries to reinstall with every apt upgrade05:01
toddctesting05:03
lotuspsychjeupgrade to jammy its got an auto deb to snap transition05:03
toddcnshire: I tested a updated 22.04.3 Gnome and removed the firefox snap updated again and rebooted and re-updated both gui and update uprade and dist-upgrade firefox did not return rebooted again05:22
nshirelaptopI wonder if it has to do with livepatch>05:22
nshirelaptopits enabled on this machine05:23
toddcshould not you did remove the snap verion correct not a deb version?05:23
toddclivepatch should ne t matter I can test it later --at work atm05:25
toddcnot05:26
nshirelaptopit said "selecting previously unselected(snap or package, forgot), firefox05:31
nshirelaptopwhen upgrading05:31
PunchingPawI can't change brightness of an external monitor.I installed ddcci-dkms and  loaded its modules i.e. ddcci and ddcci-backlight with a systemd service but to no avail -- lsmod | grep ddcc gives both ddcci and ddcci-backlight but I can't see birghtness slider on the power manager.How can I make ddcci-dkms work?08:10
vordloI'm figuring out how to decrease brightness in Ubuntu 20.04 as there's no brightness option in the settings. I cannot access the feature even by using my Keyboard brightness adjust key08:13
PunchingPawI can't either with "xdotool key XF86MonBrightnessDown".08:16
raineri08:30
hid3Greetings. Is there any way to set (system-wide) a custom $TMOUT value for shell, being inistially spawned by `screen`? I've set TMOUT in /etc/bash.bashrc and made the variable read-only09:25
elias_aIs there a way to check the current charge current in Ubuntu?09:52
elias_aI know ways of showing the charging status and charge but I need the current in amperes.09:54
shamelessshillHello folks, need some help with networking (Ubuntu server 22.04, hosted on Virtualbox) - https://paste.rs/XnIxs.txt is my netplan config right now.10:54
shamelessshillIf I remove the addresses and routes from enp0s8, I can connect to the internet from within the VM.10:54
shamelessshillIf I remove it though, I cannot access the VM via ssh from the host VM (which I need to do) since I don' have any configured addresses for that adapter.10:55
shamelessshillHelp?10:55
alkisgshamelessshill: why do you need two adapters there?11:01
shamelessshillalkisg: the first (03) is the NAT and the second 08 is the host-adapter11:02
shamelessshillI'm installing Ubuntu server, and I wish to ssh into it from my host vm ... and also be able to access the internet from within the vm.11:02
alkisgshamelessshill: and why do you want both of them? What's the purpose? E.g. you can have "only NAT" or "only bridged"11:02
alkisgIn bridged mode, you'll have access to all the VM ports. In NAT mode, you'd need to do port forwarfding.11:03
shamelessshillSo for my given scenario (sshing into the server, and accessing the internet from there), would only NAT or bridged work?11:03
alkisgYes, either (only NAT with port forward on 22) or (only bridged) would work. Bridged being the easiest.11:04
yes-ubuntuHey All! :) I am back with my weird issue of copying files from one pc to another this time, with cp over ftp over wifi; I only wanted to see if there is any difference between me trying to copy to an android device or copying between two PCs :) So, I have two PCs, both with Ubuntu (slightly different versions); I have same users on both PCs, and I11:05
yes-ubuntuhave vsftpd on the target PC. Now, I have done curlftpfs user:password@IP_ADDRESS /media/ftp (and I have modified the ftp folder in /media to be owned by the user I am trying to copy from). Previously, when I tried to copy from PC to android, I had issue with files containing a space in the name. I hoped this won't be the case between two PCs,11:05
yes-ubuntuhowever, it still is! :(11:05
shamelessshillalkisg: let me have a go with port forwarding and see... thanks!11:06
alkisgshamelessshill: in that scenario, you'd run `ssh -P1234 localhost`, and you'd port-forward the local port 1234 to the VM port 2211:07
alkisg*small p11:07
shamelessshillalkisg: Just one question ... so I only see addresses like 10.0.2.15 for my VM - is that fine? (sorry, completely a newb for networking).11:11
alkisgshamelessshill: yes it's fine. NAT means it's in an "internal hidden network", like behind a second router, but it can still access the internet properly11:11
=== ionut_ is now known as BlueChaos
shamelessshillOkay, so in the settings for the VM in Virualbox, I have set host IP as 127.0.0.1 (host), port 2222 and guest settings as 10.0.2.15, port 22. Does this make sense?11:12
shamelessshill(thanks for your help, by the way... this is all very confusing and annoying).11:13
alkisgYou shouldn't need to specify the VM IP... let me see the dialog11:13
shamelessshillI'm using VirtualBox 6.1 (pretty old).11:14
alkisgshamelessshill: yeah what you're saying is correct (there's a global dialog, I'm using bridged so I haven't seen the nat dialog in a while)11:14
alkisgGo for it11:14
shamelessshillAh, okay. Thanks! Let me try it and see.11:14
shamelessshillalkisg: "ssh: connect to host localhost port 22: Connection refused"11:17
alkisgshamelessshill: ssh -p 2222 localhost11:17
shamelessshill(also, I cannot ping that internal address 10.0.2.15 from my host vm - is this a problem?)11:17
alkisgIt's expected that you won't be able to ping it11:18
shamelessshillAh, I see. That's good then!11:18
alkisgIt's like your PC is at your office and your VM is at your home, behind your home router. You can't ping your home PC when you're at the office, but you can do a port forward in your router and ssh to it.11:19
shamelessshillalkisg: Wow ... brilliant!11:19
shamelessshillIt worked very nicely ... :)11:19
shamelessshillThank you so much, alkisg. Really appreciate it!11:19
alkisg👍11:20
shamelessshillalkisg: yes, that makes sense indeed. Thank you again - it was super frustrating! :D11:20
shamelessshillCheers!11:21
alkisgCheers11:21
salientAnyone know a good channel for AI for Nvidia Jetson?11:21
alkisg!cookie | alkisg11:21
ubottualkisg: Please see my private message11:21
alkisg:P11:21
alkisg(hungry)11:21
salientNeed some help with object recognition inference11:21
BluesKajHi all11:28
elias_aWow - someone has actually coded a python tool for monitoring charging current: https://askubuntu.com/questions/801003/are-there-any-power-consumption-indicators/801635#80163511:49
elias_aCannot get it to work, though...11:53
=== jean-loups is now known as white-wolf
mrrobotHi13:44
afiefhI am experimenting with btrfs with my system and was trying to restore my root partition to a different snapshot. I have created a new writable snapshot with subvolid=259, and modified my fstab to mount that subvolume by specifying: UUID=4f...f7 /               btrfs   defaults,subvolid=259 0       114:41
afiefhHowever, when I reboot and run `findmnt -nt btrfs`, it shows taht the mounted subvolid=256 instead of 259. Is there something I'm missing to make the system mount a different subvolid?14:41
=== TomTom_ is now known as TomTom
cbreakwith zfs I'd just make a new cloned FS and boot from that one, or use zfs rollback. Maybe btrfs has similar capabilities?15:36
cbreakfstab wouldn't be involved in that, since it is not available by the time the root filesystem is mounted I think15:36
BlueChaos? help15:46
oerheks!ask15:46
ubottuPlease don't ask to ask a question, simply ask the question (all on ONE line and in the channel, so that others can read and follow it easily). If anyone knows the answer they will most likely reply. :-) See also !patience15:46
yes-ubuntuHi All! It's me again! I am having trouble copying a file from my pc to another pc, using cp (ftp mounted to filesystem over wifi). I played around and noticed that a space in the filename will cause error, even if I use absolute paths and even if the paths are quoted. is there anything I could do? I am looking to see if this is a bug of soome17:11
yes-ubuntusort? (Both pc's are Ubuntu and the target pc has vsftpd)17:11
oerheksspaces in filenames,..17:12
oerheksquote the source folder, e.g. "Home/<name?/file"17:13
yes-ubuntu(as soon as I replace the space with an underscore, there is no more problem, however, in 2023 I would have thought it's possible to copy even files with spaces?)17:13
oerheksspaces in filenames are stupid, IMHO17:14
yes-ubuntuoerheks: yes, I did quote them, no use. I have even escaped them and still to no use, same error17:14
oerheksweird that your fix is _17:14
jhutchinsyes-ubuntu: Give us an example of the command you're using.17:14
jhutchinsI'm a little confused by your mix of ftp and cp.17:15
yes-ubuntuoerheks: fair enough, however, they are all over the filesystem nowadays, including other very special characters (I am only testing for spaces now, special characters could cause trouble too)17:15
oerheksdon' t use spaces in filenames, fixed.17:16
yes-ubuntucp "music_one.mp3" "/media/ftp/Downloads/music_one.mp3" <--- works17:16
oerheksspecial characters should not be a problem if you keep itto valid characters17:16
yes-ubuntucp "music one.mp3" "/media/ftp/Downloads/music one.mp3" <--- error ---> cp: cannot create regular file '/media/ftp/Downloads/music one.mp3': No such file or directory17:16
rfmyes-ubuntu, is that the exact command that fails?  Yesterday a sudo was involved17:17
JanCI have plenty of filenames & directory names with spaces, it's generally not an issue17:17
yes-ubunturfm: yes, this is the exact command I am using now, and it works with _ (underscore) and it gives error with a space in filename17:18
oerheksJanC, indeed if you quote them17:18
rfmyes-ubuntu, OK.  I wonder if it's something about that ftp file system?  What happens if you do cp "music one.mp3" "/tmp/Downloads/music one.mp3"17:21
cbreakmaybe what ever weirdo FS FTP integration you use is dumb and can't handle spaces17:21
JanCyes-ubuntu: maybe the FTP server doesn't allow spaces or such? can you create a new file with spaces in its name in that location?17:21
rfmyes-ubuntu, oh no, I mean cp "music one.mp3" "/tmp/music one.mp3"17:22
cbreakftp is quite bad, do you have access to something better?17:23
cbreaklike sftp?17:23
JanC(also, you don't need the filename in the destination when it's the same)17:23
yes-ubuntuyou guys are a bit confusing for me :) so, on the target pc, I have installed vsftpd17:23
yes-ubunturfm: are you suggesting for me to just try and copy the file locally to /tmp ?17:24
rfmyes-ubuntu, yes.  if it works, it shows the problem is in the ftp file system, not in the command parsing.17:25
yes-ubunturfm: yes, I just tried to cp to /tmp and it works fine17:26
JanCit could be in the "FTP file system" or in the FTP server itself (some have options to block certain characters in file names etc.)17:27
jhutchinsy money's on restrictions in the ftp server and ftp fs.17:27
jhutchinsMy17:27
jhutchinsyes-ubuntu: Do you control both systems?  Are they on different networks and/or different locaations?17:28
jhutchinsyes-ubuntu: You're probably better off using native ftp commands rather than mounting the filesystem, or using ssh/scp.17:29
rfmJanC, yeah, the way to tell whether it's the source ftp file system or the target ftp server would be to fire up the old ftp client and try to copy it over.  But it's been too long for me to remember the commands...17:29
yes-ubuntujhutchins: yes, I control both systems, both pc's are mine, on my home network :) set up so I can test this awkward situation from yesterday :D17:30
JanCI'm pretty sure Gvfs still supports FTP, so any Gtk-based GUI file manager like Nautilus or Nemo should work  :)17:31
eMaksACHTUNG! there seems to be quite of race condintions now involved when trying to unpdate ubuntu desktop 22.04-2 LTS17:32
jhutchinsftp is an archaic protocol and may not handle special file names.17:32
eMaksthanks to ubuntu package holding system17:33
jhutchinseMaks: What update method area you using?17:33
eMaksfailing both apt update and via software updates manager17:33
oerheksphased updates, ..17:33
oerheksnot a bug.17:34
eMaksforcing updtes will crash the ssytem17:34
jhutchinseMaks: You might try apt-get - it is less prone to race conditions.17:35
eMaksyep, phased updates again (not a first time) causes system crash if forced17:35
eMaksi already founf the reapair just letting other to know17:36
eMaksdid't try apt-get, used apt, any diff?17:37
oerheksfile a bugreport, to do so..17:37
eMaksyeah, this time its priced for a report...17:37
eMaksspent couple of hours to figure out17:38
eMakstested on a ubuntu desktop, not sure if server is affected17:38
eMaks22.04.0217:38
eMaksmaybe (not really sure) but probably the move to 6. kernel is involved somehow17:40
oerheksno, linux-firmware gave some issues, update today17:40
eMakskernel is not holded but its dependencies migh be17:40
eMaksaha17:41
eMaksi've got complete system carsh17:41
eMaks*crash17:41
JanCwhat do you mean by "forcing updates"?17:41
eMaksbut... its a KVM guest in BIOS mode, there firmware are not updated AFAIK17:42
eMaksi mean there will ba warning of partial updates available but its possible to process regulalry17:43
eMaksif you do, system crash17:43
eMaksis a update-manager you select "All updates"17:43
eMaksit will fail17:44
eMaksyoue force updtaes and i've got permament system crash17:44
oerheksselect "All updates" .. never got that done with the gui17:45
eMaksson't try :D17:45
eMaks*dont17:45
oerheksyou are just making jokes17:45
eMaksbut its just modyfying apt list17:46
eMakswith the selsction of "Security updtaes only" its all OK17:46
eMakssince it does not pull many updates17:47
eMaksit seems to be that holding updates has a race conditions to previously installed17:49
eMaksnice :D17:49
eMaksor kernel itself...17:50
eMaksso hold your updates for while, who knows for how long or be ready to install those that are holded17:51
yes-ubuntuAny of you could suggest an alternative to vsftpd for me to give a try and replace it with?17:51
oerheksnfs would be a choice17:52
cbreakproper sftp might work better too17:52
JanCyes-ubuntu: I doubt vsftpd is the problem (except maybe the way you configured it, but I'm not familiar with it enough to know what could be wrong)17:52
cbreakwith OpenSSHD17:52
JanCyes-ubuntu: did you try connecting to the FTP server using a GUI client, and see if it works there?17:53
cbreakyes-ubuntu: what do you use on the client side?17:53
yes-ubuntuJanC: give me a suggestion to try, please?17:54
yes-ubuntucbreak: so far I mounted the ftp filesystem and tired cp17:54
cbreakyes-ubuntu: don't confuse FTP and SFTP, they're basically unrelated17:55
JanChow did you mount the ftp filesystem?17:55
cbreakSFTP uses SSH, you can for example mount it with sshfs servername:path localpath17:55
cbreakI just tried that, spaces work fine with an OpenSSH server17:56
JanCthey work fine with vsftpd too17:56
eMakswell, proftpd but its just same eggs from another angle17:57
eMaksnot designed for many (thousands) of file transfers17:59
eMaksthats probably where u see the problem17:59
eMaksmounting ftp as a filesystem, on paper its possible but a recipee for data loss18:00
cbreakagain: ftp and sftp are not the same.18:00
eMakssftp has nothing to do with ftp :D18:00
cbreakexactly.18:00
eMaksthen yes :S18:00
JanCthe problem is not FTP vs sftp, so please don't make things more complicated18:02
JanCyes-ubuntu: how did you mount the "ftp filesystem"?18:02
yes-ubuntuJanC: I used curlftpfs user:password@ipaddress /ftp_dir_on_my_source_machine18:02
yes-ubuntuI have just tried from my source PC to just use ftp IPADDRESS and copy a file having spaces to my destination machine (to the vsftpd) and it worked (ex: ftp> put file\ one.mp3 and it went well)18:04
JanCseems like this is a curlftpfs bug18:05
eMakspipe?18:05
JanCshould be fixed by this commit: https://github.com/JackSlateur/curlftpfs/pull/4/commits/5bebe533ef9a15d341fc1e46407137007c19070918:06
-ubottu:#ubuntu- Pull 4 in JackSlateur/curlftpfs "spaces in file and dir names fix" [Merged]18:06
-ubottu:#ubuntu- Pull 5bebe533ef9a15d341fc1e46407137007c190709 in JackSlateur/curlftpfs "removed getpass, added readpassphrase" [Open]18:06
eMakssee quotation marks18:06
JanCit was curlftpfs not encoding URLs with spaces correctly18:07
yes-ubuntuHow is it possible to have that fix on 17 Feb 2023 and apt install would still install an old, unfixed version? :(18:09
yes-ubuntuand moreover, how can I use the fix you just pointed at on github JanC?18:09
JanCbecause your Ubunt uinstall probably has an older version & nobody applied the fix, I suppose18:10
=== p is now known as Guest6916
JanCyes-ubuntu: do you really need curlftpfs? it seems to have several other problems too?18:17
yes-ubuntuJanC: I can use anything else! :) What's on the menu? :)18:18
JanCwell, what exactly are you trying to accomplish?18:18
yes-ubuntuJust copying files from pc1 to pc2 :D18:19
rfmyes-ubuntu, you should mention that you're eventually going to want to copy to an android device (at least you were yesterday)18:20
JanCpreferably on the command line or in a GUI or both?  or only in scripts?  or?18:20
JanCIIRC android has its own stuff for that?18:20
yes-ubunturfm: I am over that one for now :D as I used my usb cable and am done with android :)18:20
yes-ubuntuJanC: yesterday, I wanted to copy files to an ftp server (believe it or not, android has ftp server, optionally, via f-droid)... and I remembered that Ubuntu used to have a built in way to mount an remote ftp mountpoint to the local filesystem ... however, that was back some years ago? Maybe 10 years or so before? So, yesterday, I started to google18:24
yes-ubuntufor a way and curlftpfs popped up, hence I used it and now, thanks to you JanC figured out, there is a bug with curlftpfs ... :( so, for future use I am looking for a solution, the simpler, the better :)18:24
JanCif you are on a regular Ubuntu Desktop system, you can just use the file manager to access FTP servers using the file manager18:27
lotuspsychjectrl + l and enter ftp adress indeed18:27
rfmyes-ubuntu, if you're just copying between ubuntu (or other linux) systems, getting ssh access between the systems and use scp or rsync would be the usual CLI way...18:28
JanCyeah, if you don't need anonymous access ssh/scp/sftp might be a better option18:30
JanCwhen using a Gvfs-based file manager you can also do it from the command line after mounting BTW  :)18:32
JanCand you can use "gio" directly from the command line also...18:40
wantsEncryptionBest guide to manual Full Disk Encryption install (nvme) ?19:03
srcwantsEncryption: what's manual?19:11
srchttps://wiki.gentoo.org/wiki/Full_Disk_Encryption_From_Scratch_Simplified fdisk, cryptsetup, not sure how cross-compatible this is19:12
wantsEncryptionWhere I control the partitions and which physical disk gets used19:12
srchttps://wiki.archlinux.org/title/Dm-crypt/Encrypting_an_entire_system19:12
srcwantsEncryption: doesn't the Ubuntu installer let you do this?19:12
src(I think it does but might be wrong who knows)19:13
wantsEncryptionIt doesn't allow any control19:13
wantsEncryptionI plan on using a platter drive for /home, /var, and /tmp to minimize nvme write cycles19:15
srcseems like if you boot into live you can just drop into a console, set up your partitions and encryption first and then run the installer19:15
srcskimmed over https://www.tecmint.com/encrypt-disk-installing-ubuntu/19:15
srcit's covering 22.04 and is from 2023-02-20 so reasonably current19:16
src(sorry I can't help more than that)19:16
wantsEncryptionyep - but then I realized that luks1, grub boot partitions, etc was complicated and dependent on stuff like kernel support (vs luks2)19:16
srcI thought the ubuntu installer allowed for manual partioning etc19:16
wantsEncryptionSo I popped open the IRC help channel :D19:16
wantsEncryptionYes - it's very manual, and I didn't see any lvm options.19:17
wantsEncryptionHere was my first thought https://help.ubuntu.com/community/Full_Disk_Encryption_Howto_201919:17
wantsEncryptionI figured I could translate that into gparted actions easily enough19:18
wantsEncryptionthen I recognized the LUKS1 vs LUKS2 issue for GRUB boot drives.. I've never really understood GRUB19:18
wantsEncryptionGoogle can show me options, but it can't tell me which is appropriate for 23.04 :P19:19
rboxsounds like you should just let the installer do it19:20
wantsEncryptionI considered that, then coming back after and moving/reassigning everything in fstab19:21
=== justache is now known as reddit-boat
=== reddit-boat is now known as justache
=== banta1 is now known as banta
yes-ubuntuJanC & rfm & lotuspsychje Thank you! :) I was referring to the easy connect to server option in older Ubuntu desktop... yes! lotuspsychje has mentioned ctrl + l which I tried but it does not work... I looked around the nautilus menu and it has no such option as connect to server :(20:05
yes-ubuntuActually, never mind... midnight commander (aka mc) can also connect to FTP servers... I totally forgot about this...20:09
JanCyes-ubuntu: I can connect to FTP servers using Nemo, so that should work from Nautilus too (as both use Gvfs)?  what Ubuntu-version are you on?20:15
yes-ubuntuJanC: 23.0420:16
JanCI tested with 22.04; maybe someone decided to remove FTP-support...?20:17
JanCseems like that would be weird20:17
yes-ubuntuJanC: nope, sorry, you are right! FTP connection works from Nautilus too... I did not use the correct FTP addressing (I only entered my IP whereas it needs ftp://ip-address) It is wonderful! :D If I knew this yesterday... I would have saved a lot of time and would have not bothered anyone with my messages in here ...20:20
JanCotherwise it doesn't know what protocol you want to use  :)20:20
yes-ubuntuJanC: I just tried to see if ip-address:port-number would help but it actually needs ftp:// to start with :)20:22
JanCit has support for FTP, WebDAV, SFTP, NFS, MTP, SMB, etc.20:22
JanCso, yes, it needs a protocol in the URL20:22
yes-ubuntuMTP is usually via usb cable isn't it?20:22
JanCyeah20:22
JanCbut it's not normal USB Mass Storage20:23
JanCit's a somewhat weird & limited protocol20:23
yes-ubuntuThanks All for your help! :)20:27
=== effendy[m] is now known as effendy
Guest98476My Ubuntu 20.04 is broken now. I saw a red circle icon at the upper right corner, I clicked it, it said something about problems related to package manager or something like that. There was an option like "show updates" to show me what'20:55
Guest98476s broken or something. I clicked it and saw a blank update window, with all the buttons and everything, just nothing to show. But there was a size to it.20:55
zetherooIs it possible to view mounted NFS shares in the Files app?20:57
Guest98476I clicked to install these ghosted updates... I saw it say something like "Removing GNOME..." or similar. Then it left me with a small blinking cursor in the upper left corner on a completely black screen. I tried waiting for 10 minutes. Nothing happened. So I started pressing a bunch of buttons to see if it's alive. Nothing. So I switched it off.20:58
Guest98476It's a laptop. I powered on again and it just said "login" on a black screen. It's what you call TTY.20:58
Guest98476Did my DE just got uninstalled?20:59
Guest98476What are NFS shares? I can't see Files app.20:59
Guest98476The text in notification said something about deprecated packages or something like that.21:00
Guest98476Before this, I tried to go behind its back (since it wasn't telling me anything about what updates despite clicking "show updates), by using Terminal to download and install 130 updates.21:01
Guest98476I had fallen back on updates. This is not my main laptop. So I thought I might as well do the updates first. The GUI was not very useful by showing me blank list of updates, and also talking about deprecated updates and other stuff I don't understand.21:03
Guest98476Did I say 20.04? I meant 22.04. I have been running Ubuntu 20.04 and 22.04 on a laptop for about three to four years now and for the most part it has worked well. But in the past year I started seeing odd notifications about Firmware/BIOS updates in app center, and when I click to update it doesn't work. Also there is/was one app that occasionally21:04
Guest98476appears/ed to have a new update in app center and when I click to update it, I get a warning or error message telling me I can't do that while the app is running... but why would it tell me to update if I can't do that? Doesn't make sense. Or at least try to quit it for me? I don't remember what app it is, but it's something essential like Firefox21:04
Guest98476or similar.21:04
Guest98476I also noticed for some time, when I do updates using Terminal, there were always increasing number of packages not upgraded, skipped or so. Recently that number was 9 packages. And right when I clicked that button in app update manager, it said something about 20 packages being removed... so it removed 20 instead of 9? I have no clue. I just want21:06
Guest98476my desktop back.21:06
callmeasparagusyo21:23
bpromptyo sup!21:24
callmeasparaguswhat is this chat for?21:24
bpromptcallmeasparagus: ubuntu linux support channel21:26
Guest98476How about some support then?21:35
Guest98476How do I start Ubuntu desktop from TTY?21:36
Guest98476If Ubuntu desktop is installed, should I be seeing "not found" for gnome-shell?21:37
=== adendrag3320998 is now known as adendrag332099
valdema<322:32
Guest98476Am I invisible?22:42
jeremy31Guest98476: No22:45
jeremy31But I don't know the answer to your issue22:46
thriceGuest98476: why are you on tty, instead of launching through gdm ?22:47
Guest98476jeremy31 thanks for confirmation. I really started to believe no one is seeing my call for help. But never mind. I fixed the problem myself. It only took me good 2 hours to figure out what works and what doesn't. But I fixed it myself and there is no better feeling than getting things done yourself. But I should not be in this position to begin22:51
Guest98476with. To click the "Install Now" button in Software Updater (with blank list) should not end with 20 packages being removed including gnome-shell and a single blinking tiny weeny cursor in the upper left corner, and unresponsive system that after forced reboot leaves the user at a TTY login.22:51
jeremy31Guest98476: You could file a bug report, hopefully the apt logs have some useful information22:52
Guest98476thrice hello! GDM? Graphical Desktop Manager I suppose? I have no idea. For some reason a bunch of GNOME related packages started to be removed when I clicked on "Install Now" in Software Updater. This was after a red circle appeared in the upper right notifications area, talking about deprecated packages or something. I clicked "show updates" and22:57
Guest98476it gave me a blank list, to which I replied with "install now". And it removed some 20 packages including gnome-shell and showed a black screen with just a cursor... you can read the rest above. But why? I think it's that time again, when I have to reinstall the system to get it to work out the kinks.22:57
Guest98476jeremy31 thanks for the suggestion, I will have a look at that tomorrow. It's getting late here now. Will APT log include the message that came up in the notifications?22:59
jeremy31Guest98476: I am not sure but the apt log is a start23:01
leftyfbGuest98476: sudo apt install --reinstall ubuntu-desktop gnome-shell-common23:02
Guest98476OK. Just to give you an idea where or how this little incident started. Have a look at the image on this post. https://askubuntu.com/questions/873677/how-can-i-hide-the-an-error-occurred-tray-indicator-icon23:03
leftyfbGuest98476: we have no way of knowing what happened since all you have us was "I click *something* and *something* happened and it said *something* *something*" We're going to try to re-install the desktop packages to get you back to a desktop. If that doesn't work, then I highly suggest you re-install with Ubuntu 22.04 and restore from backup23:05
leftyfbwait, you fixed it already?23:06
Guest98476Not sure I fixed it correctly, but it looks pretty good and it works. I did not use the exact same command line but something like sudo apt install ubuntu-desktop.23:08
leftyfbGuest98476: future reference, if you require support, you really need to pay attention to error messages and the exact commands you type in. Take screenshots and/or copy/paste if you have to. *something* doesn't help us at all23:10
Guest98476I also did sudo apt install gnome-shell previously from TTY screen and that gave me a different looking desktop. Gnome 4? With a big square for mouse pointer and other weird stuff. So I installed ubuntu desktop on top of that.23:10
ray_how can i get nvidia 535 to work with kernel 6.2 ??23:12
Guest98476I am usually good at taking screenshots. But this time it caught me off guard and it was too late. I didn't think it would break down by using the GUI.23:12
Guest98476But I appreciate the suggestion, I know it's important to have something to go on.23:13
rboxray_: you have to fix the broken code23:13
ray_rbox - gimme a link - thanks.23:14
rboxlink?23:14
ray_what code23:14
rboxthe code thats broken23:14
ray_lol - never seen any broken code.23:14
rboxtheres broken code all around us23:14
leftyfbrbox: you're not being helpful23:15
ray_which code got broken ?23:15
leftyfbray_: what I think rbox is trying to allude to is there's been known issues with nvidia and the new 6.2 kernel. You might want to just boot into your last 5.19 kernel and wait it out23:16
ray_I tried from nvidia site but keeps telling me its not right kernel.23:16
ray_leftyfb,  UBUNTU UNINSTALLED IT WHEN IT INSTALLED 5.223:16
ray_6.223:17
leftyfbboot back into 5.1923:17
ray_ubuntu uninstalled it23:17
ray_22.0423:18
leftyfbray_: sudo apt install linux-image-5.19.0-50-generic linux-modules-5.19.0-50-generic linux-modules-extra-5.19.0-50-generic linux-headers-5.19.0-50-generic23:18
ray_i need to know what kernel to re-install23:18
ray_cool beens leftyfb  thanks.23:19
ray_nouveau dont cut the mustard on ubuntu.23:19
ray_lets try - reboots.23:22
=== pascal_ is now known as Guest6620
ray_leftyfb,  same thing with that kernel.23:33
ray_meybe kernel 5.15 ?23:35
jeremy31ray_: can you reinstall the nvidia driver in older kernel23:37
ray_maybe i shold just go get a 5-5600G and not just 5-5600 to avoid nvidia.23:37
ray_i tried jeremy3123:38
ray_wont work23:38
ray_anyway, thanks for trying.23:42
=== Birfday_Liowenex is now known as Liowenex

Generated by irclog2html.py 2.7 by Marius Gedminas - find it at mg.pov.lt!